Question about 2000 Chevrolet Blazer

1 Answer

I have a 2000 chevy blazer with electronic 4 wheel drive. When I push the 4 wheel drive button it flashes but never goes into 4 wheel drive. Do have any suggestions

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 5,763 Answers

First thing is to check the 4wd acuator on the transfer case that goes bad all the time on those trucks, replace that il bet thats your problem,test it if its getting power then its bad . good luck.

Posted on Nov 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2004 chevy s10 push button 4whl will not go into 4lo not 4hi


First try disconnecting the battery for about 10 minutes. This will reset all of your electrical systems and perhaps fix the issue.
If this doesn't work then check the 4 wheel drive transfer case electronic module in the right kick panel on the passenger side for corrosoion. If any posts are broken are burnt they will need to be replaced.

Feb 26, 2011 | 2004 Chevrolet S-10

2 Answers

I have a 1996 chevy blazer and dont know how to disengage from four wheel drive to two wheel drive?


As I recall the 96 blazer had electronic shifting for 2wd to 4wd. There should be a small panel on the drivers dash buttons for 2wd, 4wd lo and 4wd hi.

Simply press the desired button while stationary and if the system is functioning properly then it will shift and the light for the engaged type of drive will be lighted. Generally you would like to be in 2wd for this vehicle.

Mar 10, 2010 | 1996 Chevrolet Blazer

1 Answer

Have a 2000 chevy blazer 4x4. Checked out the push button 4 wheel drive before we had snow (cpl month ago) worked fine. went to use the auto 4x4 it just flashed and went back to the 2 hi tried 4 hi did the...


try pulling the fuse for the 4wd and see if it needs replacement if not leave it out for a few minutes before replacing it as this will allow it to reset .

also check all the vacuum lines and especially
" dry-rotted " ones replace and re-connect if disconnected as well as any missing connections

Feb 10, 2010 | 2001 Chevrolet Blazer

2 Answers

2000 blazer 4 wheel drive problem


It's most likely the "four wheel drive actuator" This is located on the front differential housing. It's cylindrical shaped and has a large hex (about
1-1/4") and two wires coming out of it. Usually they short out and blow the fuse but, I've also seen where they just quit working and sometimes they just get slow to work. The "actuator" has a heating element in it and it warms up, some sort gas, causing it to expand thus engaging the front wheels. In cold weather it may take a minute or so for it to engage, so put in four wheel drive and wait for a bit and see what happens.

Jan 05, 2010 | 2000 Chevrolet Blazer

1 Answer

When push button for 4 wheel drive the front end want ingage and the button just keeps flashing


Have you tried putting it in Neutral, then selecting 4-low. That's what we have to do on our 2000 Chevy Blazer. Same with going from 4-low to 4-high or 4-low to 2 high. It will shift from 2-high to 4 high on the fly (not in Neutral) and back.

Dec 31, 2009 | 1996 Chevrolet K1500

1 Answer

4 wheel drive service light on the dash panel lit up on my 2000 chevy blazer, cannot push any buttons for 4 wheel drive to work, what could be the problem


most common problem is the TCSCM meaning transfer case shift control module,get back to me if you need more help PS this is not a cheap part

Dec 09, 2009 | 2000 Chevrolet Blazer

1 Answer

2000 Chevy Blazer stuck in 4L


try putting in neutral then try shifting in to 2h

Aug 17, 2009 | 1999 Chevrolet Blazer

3 Answers

My truck is stuck in 4 lo


pull atc 25 amp fuse in underhood fuse center and 10 amp 4wd fuse inside cars fuse box,your problem is in control box behind kick panel on pass. side ,corrosion build up,

Mar 06, 2009 | 2000 Chevrolet Blazer

1 Answer

1994 chevy s10 blazer 4x4 push button type


small sylinoid on the top of the transfer case needs replaced. easy to do. it has three vacumelines going to it just trun out and replace like a bolt.

Dec 10, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

469 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...