Question about 2002 Saturn VUE

1 Answer

How do you program a keyless entry remote for a Saturn vue?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

I have taken keyless remotes bought on ebay to a Saturn dealer and for $15 they set the car receiver to respond to that remote. Some dealers charge more, call around first. If you are having other servicing done it can be very cheap. I have used GM dealers also, for an 01 Saturn so they should be able to help you on an 02. They also have a nifty tool to tell you whether or not your remote is good. I would note that if you google around you can find some horror stories from folks who tried the jumper wire in the analyzer socket method which seems to be so popular.

Posted on Nov 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Programming keyless remote saturn ion ?


If you're talking about the keyless entry transmitter, you'll need to go to a GM dealership service department. Tech 2 scan tool is needed to program through the BCM

Aug 19, 2017 | Saturn Cars & Trucks

1 Answer

How do I open keyless trunk for 2004 saturn vue


Use your keyless entry transmitter or power door locks to unlock the liftgate. To open it, lift the handle located in the center of the liftgate.

Aug 04, 2015 | Saturn Cars & Trucks

1 Answer

Remote keyless entry on 2007 saturn aura


Go to any GM dealer, buy a remote, and they will program it for you quick and cheap. If it won't work, they can diagnose the symptom quickly.

Dec 05, 2014 | 2007 Saturn Aura XE

1 Answer

Have 2009 Saturn Aura need to program keyless remote


Sorry dealer only !
Important: Up to 4 transmitters can be programmed. Do not operate or program the transmitters in the vicinity of other vehicles that are in the keyless entry program mode. This prevents the programming of the transmitters to the incorrect vehicle. The order in which the transmitters are programmed is important. The first transmitter programmed will be transmitter #1, and the second transmitter programmed will be transmitter #2. Use care to program the transmitters correctly.
The scan tool must stay connected until all of the transmitters are programmed.
Invalidate All This procedure will erase all keyless entry transmitters from memory.
  1. Install a scan tool.
  2. Turn ON the ignition with the engine OFF.
  3. With the scan tool, select Body.
  4. Select Remote Control Door Lock Receiver (RCDLR).
  5. Select Module Setup.
  6. Select Program Key Fobs.
  7. Select Invalidate All.
  8. Follow the scan tool on screen instructions.

Jul 22, 2012 | Saturn Aura Cars & Trucks

1 Answer

I have a 96 ford conversion van with a 600 plus addon keyless system and need to program new keyless remots , need to know how to get system in program mode.


Hi.

To program ( or reprogram ) a keyless entry remote transmitter into the remote keyless entry module, perform the following steps:

1. Turn the key to ON or ACC and short the two terminals of the program connector, a two-pin connector located below the driver's side of the instrument panel at the base of the steering column. All doors should lock and then unlock.
2. Press any button on each keyless entry remote transmitter in turn. All doors should lock and then unlock. If the door locks do not respond, press the button again (up to three times maximum with the same keyless entry remote transmitter). If the door locks still fail to respond, go to Pinpoint Test A.
3. Repeat Step 2 to program additional keyless entry remote transmitters into the remote keyless entry module (up to four keyless entry remote transmitters maximum).
4. Turn key off.
5. Remove the short from the program connector. All doors should lock and then unlock.
6. Verify that the keyless entry remote transmitters have been successfully programmed by pressing the LOCK or UNLOCK button on each one, and observing that the system responds by locking and/or unlocking the doors.


I hope this helps you.

Thanks!

Nov 28, 2010 | 1996 Ford Econoline

1 Answer

How do i reprogram electronic door locks


Programming Electronic Door Lock Control System NOTE: The electronic door lock control processor (14B001) erases all previous keyless entry remote transmitter (15K601) from memory when the keyless entry remote transmitters are programmed or reprogrammed. The electronic door lock control processor can store up to four keyless entry remote transmitters in memory.


  • To program (or reprogram) keyless entry remote transmitter into the electronic door lock control processor, perform the following steps:
  1. Turn ignition switch to the RUN position and momentarily short the two terminals of the program connector taped to the wire assembly and located behind the glove compartment. All doors should lock and then unlock. Remove shorting pin.
  1. Press any button on keyless entry remote transmitter. All doors should lock and then unlock to verify the keyless entry remote transmitter has been programmed. If door locks do not respond, press button again (up to three times maximum with the same keyless entry remote transmitter).
  1. Repeat the above step to program additional keyless entry remote transmitters into the electronic door lock control processor (up to four keyless entry remote transmitters maximum).
  1. Turn ignition switch OFF. All doors should lock and then unlock.
  1. Check operation.

Jun 05, 2010 | 1997 Ford Windstar

1 Answer

Liftgate on 2004 saturn vue won't lock.


the electric actuator part of the locking mechanism probably went bad and is not locking the lock,,you reall would need to remove the inner panel and check for power and ground at the harness to the lock,if its there,,,you need a new lock actuator,if not you got another issue,,wire bad, computer etc..most likely just a bad lock actuator

Oct 26, 2009 | 2004 Saturn VUE

1 Answer

2006 Saturn Vue engine not running


check your securoity system

Mar 21, 2009 | 2006 Saturn Vue

1 Answer

Program keyless remote entry


I need a year, but u can look it up at the link provided below.

http://www.programyourremote.com/

Nov 28, 2008 | 2002 Saturn Sl

1 Answer

2002 saturn vue


sounds like a short in the security system wiring. i assume you have the locking system with the keyless entry? if so, you've got a short somewhere, most likely. take it to a good mom and pop electrical service place unless you've got a warranty at saturn. you'll get a cheaper price and often get better service.

Oct 25, 2008 | 2002 Saturn VUE

Not finding what you are looking for?
2002 Saturn VUE Logo

358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...