Question about 2006 Chevrolet Equinox

Open Question

Third brake light is loose on my 2006 Equinox. Removed three bolts on the spolier, what else is holding it on?

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 79 Answers

SOURCE: removing the spoiler with the 3rd brakelight in it on a 2005 equi

THERE MUST BE ANOTHER SMALL BOLT THERE MAY BE ONE YOU HAVE MISSED IT THE MIDDLE MOST PROB.. THERE IS SOME TIME 2 IN THE MIDDLE AREA

Posted on Apr 07, 2009

Ad
  • 1340 Answers

SOURCE: On my 06 chevy equinox the third brake light is

3rd brake lights are usually just held with 1 or 2 screws.if the clip or plastic it screws into is stripped,you can usually find a used part pretty cheap.it may just need to be screwed down.the metal clips may be found at a hardware store.

Posted on Jul 21, 2010

ftw1952
  • 10319 Answers

SOURCE: can't find all the bolts

Foam is used to affix the backside which is self stick Apply some rubbing alcohol to loosen the lamp's foam although let the alcohol set in for ten minutes first before pulling off

Posted on Feb 28, 2011

airjer995
  • 5332 Answers

SOURCE: 2008 chevy equinox. Removed all

Bang harder. They tend to rust up where it meets the hub and seize up. Eventually it will come loose. If it's the rear rotor once you can wiggle it you will be able to work it around the brake shoes if needed. Most of the time ounce you get it broken free from the hub they slide right off.

Posted on May 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 chevy equinox. Removed all bolts, removed the caliber but rotor will not come off. Spaid hub and still wont come off. Is the E brake holding it or should I just bang harder ? Any trick/help would be...


Bang harder. They tend to rust up where it meets the hub and seize up. Eventually it will come loose. If it's the rear rotor once you can wiggle it you will be able to work it around the brake shoes if needed. Most of the time ounce you get it broken free from the hub they slide right off.

May 27, 2011 | 2005 Chevrolet Equinox

1 Answer

How to replace the third brake light (hatch) on a 2005 hyundai accent. I took off the 4 screw on the the plastic cover and it still won't come off. Tried taking off cove of back hatch but don't want to...


Above the third brake light is a small panel, remove this panel using small screwdriver.
1. You'll see four (4) bolts, remove the three bolts that are painted black, do not remove the center bolt holding the plastic molding, this is for the door molding, and has nothing to do with the light.
2. Once those three bolts are out, you'll see two more small screws, remove them and you'll have access to the third brake light bulb.

Be careful when pulling out the bulb, my bulb broke, and I'm still trying to get pieces out! - Good luck.

Jan 16, 2011 | 2005 Hyundai Accent

1 Answer

How do I remove front rotors on a 2006 chevy equinox awd


You will need to remove 4 bolts once you take the tire off. two bolts on your caliper need to be removed. using screwdriver pry off cali[per. remove the two bolts holding caraige(brake pad mount bracket) and bracket should come off. hit brake rotor with hammer and be care ful not to damage studs. brake rotor should come off

Oct 17, 2010 | 2006 Chevrolet Equinox

2 Answers

On my 06 chevy equinox the third brake light is loose can it be fixed without buying a new light?


3rd brake lights are usually just held with 1 or 2 screws.if the clip or plastic it screws into is stripped,you can usually find a used part pretty cheap.it may just need to be screwed down.the metal clips may be found at a hardware store.

Jul 15, 2010 | 2005 Chevrolet Equinox

2 Answers

My high level brake light has bruned out,(third brake light). I was informed by the dealer the back window panel has to be removed to replace the 3.00 dollar bulb, total cost 75.00 dollars. With some


replace the bulb...??? This requires you remove the rear package deck (to access the bulb & socket). to do this, remove the seat bottom (two bolts hold the rear seat bottom to the chassis, then remove the bolts which hold the shoulder cushions (LH & RH - 12mm bolts) then remove the cosmetic molding around the trunk access (7 to 8 screws) then remove the "C" pillar covers (SRS curtain airbag LH & RH) to access the rear deck package & access the third brake lamp bulb. replace it, then reassemble.

May 26, 2009 | 2006 Hyundai Sonata

1 Answer

Removing rear break drum from a 2006 chevy Equinox


You need to de-adjust your rear brakes and/or slacken off the park brake cable to remove the drum as the chances are the drum has a wear lip that the shoes are getting hung up on. ( first make sure there isn't a little retaining screw holding the drum on !..visible with the wheel removed)

Apr 07, 2009 | 2006 Chevrolet Equinox

1 Answer

Removing the spoiler with the 3rd brakelight in it on a 2005 equi


THERE MUST BE ANOTHER SMALL BOLT THERE MAY BE ONE YOU HAVE MISSED IT THE MIDDLE MOST PROB.. THERE IS SOME TIME 2 IN THE MIDDLE AREA

Apr 07, 2009 | 2005 Chevrolet Equinox

3 Answers

Can't get the spoiler, that holds the 3rd brake light on the off


regarding chevy equinox spoiler there are three 10mm bolts one on each end and one in the middle then there are three pins in the middle that snap in. these are very difficult to release without breaking them. If they break use a two part adhesive sparingly to hold the spoiler down or it will hit when you open the hatch.

Apr 05, 2009 | 2005 Chevrolet Equinox

2 Answers

Vw passat brake light


3 clips total. 2 on outside of light unit, to get to these you have to remove central trim from over boot latch, side trims and carpets, toolkit out, seats folded down, luggage blind removed, small trim piece inside wheel well removed (2 bolts 1 nut), then you can get up behind the light unit, gently clip the 2 outside (red) clips out till the light unit becomes free. to get to the third there is a black plastic trim piece clipped to the light unit where the boot comes down and meets it, this covers the third clip, gently pop it off and you will reveal the third clip and the nut needed to be removed to release it.


Aug 03, 2008 | 2006 Volkswagen Passat

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...