Question about 2004 Chrysler Pacifica

2 Answers

After driving several miles my 2004 pacifica starts to beep - 3 beeps every 30 seconds and doesn't stop. No lights are on - engine or otherwise. Once I've stopped and the engine has been turned off for 5+ minutes and then start again it goes 5 miles or so before starting to beep again. Bepp is just like reguslar warning beep.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, did you ever figure out your problem? I'm having the exact same issue with my 04 Pacifica.

Posted on Nov 25, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 561 Answers

If you drive slowly does it not start? ensure you do not having anything resting on your passenger seat. if there is a weight sensor in the seat for the seatbelt warning the car assumes sombody is in the passenger seat. or the sensor is defective to isolate this plug the passenger seatbelt into its lock and see if the problem goes away. (when driving slowly this may not start. the alarm may be set to go of after a certain speed)

note: keep all clutter away from the driver position after cornering or breaking, debris may fall into the foot well and interfere with the pedal movement. or fall onto the driver.

Posted on Nov 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 06 Pacifica, just changed the oil day before the problem started. I was driving, the oil and the check engine light came on , the car shut it self off. I stopped to the side of the road and...


go to your local auto parts store ...have them to read your vehicle free ,,they are always on the money with the part you need ,,preferably autozone

Oct 18, 2013 | 2004 Chrysler Pacifica

1 Answer

How do I change the oil pressure switch in a 2004 Chrysler Pacifica


most likely not the sensor; change the oil and use an oil of greater viscosity. which engine? how many miles?

Mar 05, 2013 | 2004 Chrysler Pacifica

2 Answers

2004 Chrysler Pacifica a/c doesn't blow any air in front vents, only defrost works


I have the same problem starting on mine. The first answer above is totally wrong. The actuators that control the doors are 12 volt electric no vacuum. There are three actuators on the drivers side under the panel by the gas pedal. I haven't worked on mine so I can't tell you which one it is but all are the same part and interchangeable take a new one and try it in each position until it works.There is one in the center console and one under the passenger side by the blower motor the console is for rear HVAC and the passenger one is for recirculation after installation it will have to be calibrated . Turn ignition to ON not start push the power button and the recirculation button at the same time hold for 5 seconds lights should start flashing leave it for two minutes or the lights stop flashing. If they don't stop recalibrate until they do. If they won't stop drive for eight miles and it will stop on it own. (but not fixed)

f1f15143-ce6f-44d3-a264-570a62bf03a4.gif


2004-chrysler-pacifica-c-doesn-39-t-bq0jz3zw1zvhvds4ql4jkgei-4-2.gif


2004-chrysler-pacifica-c-doesn-39-t-bq0jz3zw1zvhvds4ql4jkgei-4-3.gif

Jul 09, 2012 | 2004 Chrysler Pacifica

1 Answer

2004 chevy malibu I constantly hear a beep inside my car. What can it be?


The beeps happen when speeding up and passing other car

Jan 18, 2012 | 2004 Chevrolet Malibu

1 Answer

How to turn off change oil light on the 2004 Chevy Colorado Pick-up truck ?


1. Turn the ignition to ON do not start.Engine OFF dash board lights ON.
2. Press and release the reset button in the driver information center (DIC) until the OIL LIFE message is displayed.
3. Once the alternating OIL LIFE and RESET messages appear on the DIC display, press and hold the reset stem until several beeps sound. This confirms the OIL LIFE system has been reset.
4. Turn the key to lock. If the CHANGE OIL message comes back on when you start the engine, the ENGINE OIL LIFE system has not reset. Repeat the procedure
Alternate Method
1. Turn the ignition key to ON with the engine off.
2. Fully press and release the accelerator pedal 3 times within 5 seconds. Several beeps sound. This confirms the oil life system has been reset.
3. Turn the ignition key OFF.
4. If the CHANGE/OIL message comes back on when you start the engine, the engine oil life system has not reset. Repeat the procedure
I use the second method, it is more universal and it works for Chevy Venture too.

Nov 06, 2010 | 2003 GMC Sierra

2 Answers

Engine shakes and can not accelerate as quick when starts


If the engine light is on, a code scanner needs to be connected to it to find out why the light is on. It could be one of the sensors causing it. Take to autozone or advanced auto if there is one near you, if not call a repair shop that can do it. Autozone and advanced don't charge. Takes about 30 seconds.

Mar 24, 2009 | 2004 Chevrolet Cavalier

1 Answer

Oil light comes on and beeps


Changing oil can't hurt. When was the last time you had it changes?How many miles on that engine?Changing approximately ever 3,000 miles is common practice. The engine oil light and the automatic transmission are two seperate problems.     Engine oil light come on because the sensor reads a low oil preasure.If the engine is not worn then the light can be caused by the sensor getting cloged up (from dirty oil ) and not reading the preasure correctly.  

Jan 04, 2009 | 1996 Volkswagen Jetta

1 Answer

Flashing brake light


Check the Earth cable in the boot see that it's clean no white bits around the connection or the join. Cheers, Malcolm Campbell.

Apr 18, 2017 | 2000 Lexus RX 300

1 Answer

Beeping 04 mustang


i have same issue with my 01 does it when you first start the car and about 30 minutes after driving found online it is my airbag light in dash is blown havent changed it yet so im not sure

Jul 12, 2008 | 2004 Ford Mustang

Not finding what you are looking for?
2004 Chrysler Pacifica Logo

453 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...