Question about 1996 Ford Explorer

2 Answers

96 ford focus transmission overdrive dash light blinking after 5-10 min. engine revs in acceleration from stop but easing off the gas once or twice allows it to continue smoothly. do i have a minor or major issue?...thanks

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My explorer does this only when go over 60 mph on the highway, and then get off and drive in the city, thats when my engine revs, and it downshifts roughly. Its been doing it for years. If we drive in the city and stay below 55-60 mph there isn't a problem.

Posted on Dec 04, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 76,691 Answers

You have ecessive transmission slippage, that is why the light is blinking, you are going to need the transmission replaced or rebuilt.

Posted on Nov 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car won't accelerate with gas pedal


Transmission band slipping.

Jul 24, 2017 | 2000 Ford Focus

1 Answer

Press gas pedal


check your throttle pedal position switch and your throttle position sensor

Dec 19, 2013 | 2005 Chevrolet Cobalt Sedan

1 Answer

Rough idle/ not accelerating/coolant leak


Rough Running Engine - James on Engines #2 - Bell Performance

https://www.bellperformance.com/blog/rough-running-engine
Apr 21, 2015 - When diagnosing an engine with a rough idle, there are certain things that must be ... If the problem does not reoccur, the codes will be erased by the computer. ... when accelerating the vehicle, which causes a higher fuel demand. .... it was water in gas...added added Gas LineAntifreeze/Water Remover.

Mar 17, 2017 | 2000 Ford Focus

1 Answer

My 96 ford taurus revs high when starting then works it way from 1500 or more down to 800 but fluctuates from 800 to a little over 1000. When putting car in rverse or drive from park engine revs up to...


You need to clean the IAC again and also the throttle valve and bore, use only CRC brand Throttle body cleaner. After they are thoroughly cleaned disconnect the battery for 5 min's and then drive the car in varying condition for a few days. If that doesn't cure the issue you have more serious problems and will need a scan tool to look into the readings from the MAF, TPS and ECT sensors. High idle cold start is normal then slowly dropping after a few minutes. I assume you never had a check engine light. Correct?

Mar 24, 2017 | 1996 Ford Taurus

1 Answer

O/d light is blinking on dashboard, car won't accelerate past 40mph, car revs very high


Sounds like the o/d solenoid is bad electrically or plugged up. Probably, if the o/d light is blinking, it indicates and electrical problem with the shift solenoid, so it won't shift into overdrive.

The transmission is likeley in need of repair by a transmission technician who can diagnose, take it apart, and repair the part. It will not be cheap to do this, though.

Good luck on this repair.

Nov 18, 2010 | 2002 Ford Explorer

1 Answer

Replace Teflon o-ring on power steering hose


Overdrive light blinks on 96 Aerostar AWD then transmission downshifts hard or will not accelerate

Feb 22, 2010 | 1995 Ford Aerostar

1 Answer

2003 ford focus... possible transmission problem.. or electrical?


Overdrive is a lock up within the transmission. The other "gears" are fluid and belt driven. So, could be that the sensor that allows the overdrive to "lock" is dirty/faulty. A transmission shop should be able to tell you in a heart beat.

Oct 05, 2009 | 2003 Ford Focus

2 Answers

"Overdrive Off" light on dash keeps blinking


I had the same problem took it to the dealer and it was a sensor inside the transmission.

Feb 11, 2009 | 1999 Ford Explorer

2 Answers

96 mustang overdrive lights flashing


have someone scan it for transmission codes. Most likely it is your Torque Converter that is going out, but it could be a solenoid, What color was your fluid?

Dec 01, 2008 | 1996 Ford Mustang

1 Answer

Hard shift and blinking overdrive


The blinking overdrive button is telling u that a serious fault has occurred in the electronic controls or a mechanical fault such as excess slippage is occurring.

Jul 16, 2008 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
1996 Ford Explorer Logo

591 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...