Question about 1992 Dodge Dakota

3 Answers

How do i get the old fuel pump off - 1992 Dodge Dakota

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

Removal: Remove the oil pan. Remove the pump-to-rear main bearing cap bolts. Lower the pump from the truck.
Installation: Pour clean oil into the pickup tube to prime the pump. Put the new pump in place (make sure hex-shaped driveshaft aligns with pump). Install & tighten bolts to 30lbs. Install oil pan & tighten bolts to 200 in. lbs.

Posted on Nov 13, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 75,189 Answers

This fuel pump is inside the fuel tank, the easiest way to get at it is to remove the bed.

Posted on Nov 13, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,826 Answers

Remove the fuel fil hose,and vent hose,and remove fuel tank straps,with jack supporting tank,lower enough to remove wire connector,and fuel lines .Remove tank from under vehicle,and remove the ring retainer,and pull the fuel pump assem,from tank.Follow instructions in the box with the new fuel pump.

Posted on Nov 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What makes the fuel pump not kick on on a 92 Oldsmobile Cutlass


There is a red wire close to the battery in the front. It's not connected to anything. Apply positive voltage and that will run your pump for testing purposes.

Dec 08, 2015 | Oldsmobile Cars & Trucks

Tip

Fuel pump wiring for aftermarket GM fuel pumps


When replacing fuel pumps in chevy or gmc trucks and suv's the aftermarket fuel pumps come with new plug and wire connectors. Which requires you to cut off the old pigtail and connect the new pigtail to the vehicles wiring, the reason the manufacturers of the new fuel pumps did this is to fix problems with the old style connector that was on the factory unit.

on May 18, 2010 | Chevrolet Blazer Cars & Trucks

1 Answer

My son bought a fuel pump for his 96 Jeep Grand Cherokee. The difference between the new fuel pump and the old one is the old one has an additional nipple on the top. I do not know if the new pump wil


Your question was cut off, but I believe there\'s enough info to know what you\'re asking.

First, what engine does he have? The 4.0 L straight six or the 5.2 L V-8?

If the old pump has 2 fuel connections, one is for supply (pressure) and the other one is for return to tank. The new pump will have to have both of these nipples for the system to work properly.



Just to clarify,, is his old pump a 2-nipple one and the new one with only 1 nipple? Or is the old one a 3 nipple and the new one a 2-nipple?

Nov 02, 2014 | Cars & Trucks

1 Answer

Replaced fule pump, starts then dies


Check tank for anything that could be causing fuel to not reach fuel pump such as dirt or debris also old parts off of old fuel pump like one time I found an o-ring off old pump floating around and it would randomly get stuck in new pump and cause aloss of fuel pressure. also replace your fuel filter just for GP. Last if none of that works you can check for fuel at the fuel rail with a pressure gauge and check injectors with a noid light. hope it is something simple and this helps

Aug 04, 2014 | 2001 Toyota Corolla

1 Answer

I replace my 1994 Toyota 4 runner gas tank with a used gas tank filled it with gas now it wont start why?


Did you use the old fuel pump or was there one in the used fuel tank? If you did use the old fuel pump check your fuses and relays. If the used tank had a fuel pump already in it then the fuel pump may be bad.

Jul 29, 2014 | Cars & Trucks

1 Answer

I just changed fuel pump and filter in my 1999 chrysler town and country pump comes on for second then no power to pump


make sure that the old pump is likely close to new one, or see the socket of your pump may be your new one is loosen to couple of your old pump. or try to loose or remove your new fuel filter then switch at the ignition, if the fuel is continues running the problem is your fuel filter, try another new filter.

Oct 29, 2012 | 2000 Chrysler Town & Country

1 Answer

99 olds bravada. just replaced fuel pump 2 weeks


Aftermarket fuel pump failure? Try "thepartsladi" store on eBay for low price GM OEM parts. Could also be wiring harness to fuel pump.

Nov 12, 2009 | 1999 Oldsmobile Bravada

1 Answer

How do I replace the fuel pump


You must remove the fuel tank in order to replace the fuel pump. Drain the tank of as much fuel as possible with a hand pump. Disconnect the positive + battery cable. Disconnect the fuel lines and the electrical connections. Remove the fuel tank, and then remove the old pump. Clean off any old gasket and then reinstall the new pump. Reinstall the tank and then replace the fuel filter. A partially clogged fuel filter will cause a pump to fail prematurely.

Nov 10, 2009 | 1989 Buick Park Avenue

3 Answers

Fuel pump not working


Try replacing the fuel pump relay, recheck system

Jul 09, 2009 | 2001 Chevrolet Blazer

Not finding what you are looking for?
1992 Dodge Dakota Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...