Question about 1999 Mitsubishi 3000GT

1 Answer

Hi and lo beam lights are atrocious. Unable to drive highway at night. Tried one upgrade with no improvement. Is this a common problem with this model?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,841 Answers

Have you tried adjusting the headlights? This will tell you a good procedure if you want to try it yourself. http://www.ehow.com/how_112704_adjust-headlights.html

Posted on Nov 13, 2009

Testimonial: "Thank you so much for the tip. Unfortunately I'm blonde and female but if I can find those adjusting screws I'll give it a try. Night driving is prett"

  • NOT ME Nov 13, 2009

    LOL, you can find them. Just look closely for either a phillips screw or a Torx type screw. If they are Torx be sure and use a Torx screwdriver. The adjustments will be located on the top down in a hole or may be located on the backside of the assembly. Be sure and put a little weight in the driver's seat to compensate for the lack of a driver when you adjust them. It is critical the car be on a level surface about 25 feet from the wall. I admire you for giving this a try and not just giving up. It is simple once you find the adjustment screws. I am faith that if you look carefully you can find them and accomplish this.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 trailblazer indicates 4 lo but is in 2 wheel drive


Switch may be bad. Change switch should fix it.

Mar 13, 2014 | 2006 Chevrolet Trailblazer

1 Answer

Have a 2008 cadillac cts. i have no low beams only high beams


Most common cause is bad dimmer switch (lever used to flip between hi/lo beams) very common problem - plastic parts

Feb 26, 2011 | 2008 Cadillac Cts

1 Answer

I have a 1993 Mercedes and about a month ago while driving the hi beams quit as I clicked from lo beam. Now a week ago lo beam quit. To get by I was using the fog beams. Last night I turned the selector...


First check the fuses. The fuse must be in the main fuse box. The position and function of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. If you find that the problem is not in the fuses, then your next option is the relays or the light switch itself, I doubt if all the bulbs would blow like this.

Feb 22, 2011 | 1993 Mercedes-Benz Mercedes Benz 400 Class

1 Answer

Hi-lo beam headights, healdlights only work in one


have you checked the fuse? if fuse is good and still have the same problem your next step would be to have the headlamp switch checked.

Aug 05, 2009 | 2006 Ford F-150

2 Answers

Driving down highway last night and lowbeams turned off. High beams worked, couple of miles later, low beams came back on.


You may want to check the terminals at the back of the headlight. Normally this is caused by loose connections. Other than that check the rest of the wiring and the relay.

Jul 22, 2009 | 2004 Chevrolet TrailBlazer

1 Answer

I have a 1998 Chevrolet K2500 that the headlights are not working correctly on. When I turn the headlights on nothing comes on unless I turn on the high beams, only the high beams are on, no low beams. ...


Somehow the tan wire from the low beams has been cut from the hi/lo switch and is now attached to the brown wire from the headlight switch. Trace the tan wire from the headlights to the hi/lo switch to see what happened.

0996b43f80231a23-jnh1p0frnkt3q2fbcpfimq4v-1-1.gif

Aug 11, 2017 | 1998 Chevrolet K2500

1 Answer

Hi and low beam headlight wire colors


i used a test light to test each wire with lo beams on only 1 wire caused the test light to light up then when i turned on the hi beam the other wire lit up the yest light and the 3rd wire was just a common ground

Feb 14, 2009 | 2001 Dodge Neon

Not finding what you are looking for?
1999 Mitsubishi 3000GT Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...