Question about 2000 Ford Windstar
Less then a hour just locate and trace old one and replace new in its place not that hard to do .....
Posted on Nov 13, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Apr 30, 2018 | 1997 Ford Mustang Cobra
Oct 07, 2016 | 2004 Hyundai Santa Fe
Jun 26, 2014 | 2000 Ford Focus
May 14, 2014 | 2001 Volvo S60
Oct 17, 2013 | Ford Mustang Cars & Trucks
Nov 22, 2012 | 1999 Chevrolet Lumina
Take out the air cleaner resonator. Disconnect the harness connectors for both the idle air control and the throttle position sensor. Label and then remove all the vacuum hoses from the throttle body.
Remove the bracket and the cables for the accelerator control from the throttle body. Loosen and remove the throttle body fasteners.
Lift the throttle body off the manifold. Remove the throttle body gasket and inspect it carefully. Replace the gasket as needed or re-install the old gasket to the throttle body after cleaning all the mating surfaces thoroughly.
Set the throttle body on the manifold and finger-tighten the fasteners. Torque the bolts to 89 inch pounds.
Install the cables and bracket for the accelerator cable, then reconnect the vacuum hoses. Reconnect the harness connectors for the throttle position sensor and the and idle air control valve, then replace the air cleaner resonator.
Depress the accelerator pedal to test its movement and to assure that there is no binding. Press the pedal to the floor one time then release it. Make the necessary adjustments.
Jan 11, 2012 | 1996 Pontiac Sunfire
Jul 07, 2011 | Lincoln Continental Cars & Trucks
Sep 25, 2009 | 2001 Toyota Camry
117 people viewed this question
Usually answered in minutes!