Question about 2002 Cadillac Deville

1 Answer

How do you remove an oil pan on a 2002 deville?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Cadillac Master
  • 2,030 Answers

First the engine has to be removed from the car or at least jacked up at least 6 inches....then you simply unbolt it

Posted on Nov 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil pan


Remove exhaust crossover pipe and oil qty level sensor, Once you undo bolts if you find that it wont come off that means this model has bolts that cant be accessed without removing powertrain cradle.

Jul 09, 2013 | 2002 Cadillac Deville

1 Answer

How do you remove the oil pan on a 1991 cadillac DeVille?


You may have to drop one end of the oil pan down enough for you to put your arm in and unbolt the oil pump. The oil pump hanging down in the pan won't allow you to pull the pan out until the pump is unbolted.

Jul 20, 2012 | 1991 Cadillac DeVille

1 Answer

Having a small oil leak, i think its coming from the oil pan, what parts has to come off to fix it?


if its just the oil pan than just the oil pan drain the oil and pull the pan, you will need some RTV gasket maker to reseal next to the crank, replace the oil pan gaskedt RVT the corners near the crank and bolt it back into place.

Aug 25, 2011 | 2002 Cadillac Deville

1 Answer

How hard is it to install oil pan on my 2000 deville, northstar engine


I worked on a 1999 Deville and to remove the oil pan wasn't to bad to change. All I had to do was Jack up the car and support it.Also remove the negative battery terminal.Drain the oil then remove the torque converter cover bolts and then the oil pan bolts and remove the oil pan.On some model Cadillacs there is also an exhaust cross under pipe that also has to be removed.Be sure not to over tighten the oil pan bolts there real hard to get out if you break one.Your going to have to find out how tight they should be because they all very depending on the vehicle.Most all of your auto parts stores have this information.

Feb 25, 2011 | 2000 Cadillac DeVille

2 Answers

What all has to be taken off to get to to the oil pan gasket


Oil Pan REMOVAL & INSTALLATION
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Drain the crankcase.
  3. Remove or disconnect the following:
    • Negative battery cable
    • Oil level indicator harness connector, if equipped
    • Exhaust Y-pipe, if needed
    • Transaxle assembly from the vehicle.
    • Oil pan bolts and the oil pan
    To install: NOTE: The oil pan gasket is reusable unless it is damaged. Do not remove the gasket from the oil pan groove unless gasket replacement is required.
  4. Thoroughly clean the inside of the oil pan and the cylinder block contact surface. If the oil pan gasket is being reused, be careful not to damage it. Do not expose the gasket to cleaning solvents.
  5. If a new gasket is being installed, start the gasket into the oil pan groove and work the gasket into the groove in both directions. Once the gasket is exposed to oil, it will expand and no longer stay in the groove without wrinkles. If this condition exists, replace the gasket.
  6. Install or connect the following:
    • Oil pan. Torque the bolts, in sequence, to 89 inch lbs. (10 Nm).
    • Oil level indicator connector, if removed
    • Transaxle assembly, if removed
    • Y-pipe, if removed
    • Flywheel cover, if removed
    • Oil pan drain plug. Torque it to 15 ft. lbs. (20 Nm).
    • Negative battery cable
  7. Refill the crankcase.
  8. Run the engine and check for leaks. Fig. 1: Oil pan bolt torque sequence 7922vg08.gif
prev.gif next.gif

Jan 01, 2011 | 2002 Cadillac Deville

1 Answer

How to replace oil pan gasket on 2002 deville


Oil Pan REMOVAL & INSTALLATION
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Drain the crankcase.
  3. Remove or disconnect the following:
    • Negative battery cable
    • Oil level indicator harness connector, if equipped
    • Exhaust Y-pipe, if needed
    • Transaxle assembly from the vehicle.
    • Oil pan bolts and the oil pan
    To install: NOTE: The oil pan gasket is reusable unless it is damaged. Do not remove the gasket from the oil pan groove unless gasket replacement is required.
  4. Thoroughly clean the inside of the oil pan and the cylinder block contact surface. If the oil pan gasket is being reused, be careful not to damage it. Do not expose the gasket to cleaning solvents.
  5. If a new gasket is being installed, start the gasket into the oil pan groove and work the gasket into the groove in both directions. Once the gasket is exposed to oil, it will expand and no longer stay in the groove without wrinkles. If this condition exists, replace the gasket.
  6. Install or connect the following:
    • Oil pan. Torque the bolts, in sequence, to 89 inch lbs. (10 Nm).
    • Oil level indicator connector, if removed
    • Transaxle assembly, if removed
    • Y-pipe, if removed
    • Flywheel cover, if removed
    • Oil pan drain plug. Torque it to 15 ft. lbs. (20 Nm).
    • Negative battery cable
  7. Refill the crankcase.
  8. Run the engine and check for leaks. Fig. 1: Oil pan bolt torque sequence 7922vg08.gif
prev.gif next.gif

Oct 29, 2010 | 2002 Cadillac Deville

1 Answer

How do i fix oil pan leak in a 98 cadillac deville


you have to reseal the oil pan, the oil pan is a 2 piece upper and lower pan. the engine or trans mission has to0 be rtemoved to remove the oil pan per general motors there is new sealer available also the front and rear crankshaft seals should be replaced (need special tools to replace seals)

Aug 18, 2010 | 1998 Cadillac DeVille

1 Answer

How do I remove 1990 Cadillac Deville's oil pan? I CAN'T GET IT TO DROP FROM THE BOTTEM.


The engine mounts must be removced and lift the engine upward with a hoist to remove the oil pan

Jan 08, 2010 | 1990 Cadillac Deville

1 Answer

Replace oil pan on 2002 wrangler 4.0


Hi you will have to remove the exhaust and then remove the oil pan then you can use a spanner to hold the nut and remove the oil plug

Nov 08, 2009 | 2003 Jeep Wrangler

1 Answer

REPLACING OIL PAN


hi no you dont have to remove the oil engine frim the car.just jack the car up and suport it.

Feb 02, 2009 | 1997 Cadillac DeVille

Not finding what you are looking for?
2002 Cadillac Deville Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...