Question about 1990 Buick Reatta

1 Answer

After unlocking or opening door, lights flash for 2 minutes regardless of starting vehicle with correct key

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Brian,

Sounds like you have a factory, or aftermarket alarm system that was disconnected from the siren at some point. I am guessing it is aftermarket based on the fact that it will not disarm even if the correct key is used. If it is an after market alarm your problem is relatively simple to fix. Most after marke alarms are typically installed to the indicators by connecting the wires from the alarm into the cars factory fuse box. Locate the fuse box in your vehicles cabin and find look for any electrical wires that go into the fuse box from the front (WITHOUT REMOVING THE FUSE BOX). remove these wires or just the one going to your indicators, headlights, or whichever lights are flashing. The factory never connects wires to the fuse box from the front, so these wires should be obvious.

Posted on Nov 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Service immobilizer light is on an car wont start. It's a 2004 Pacifica


You are using an outdated browser. Please upgrade your browser to improve your experience.
Electrical • Vehicle Theft Security • Description Report a problem with this article

DESCRIPTION

VEHICLE THEFT SECURITY SYSTEM

The Vehicle Theft Security System (VTSS) is designed to protect against whole vehicle theft. The system monitors vehicle doors, and ignition action for unauthorized operation.
The alarm activates:
  • Sounding of the horn
  • Flashing of the headlamps/park/tail lamps
  • An engine kill feature (with SKIS)

SENTRY KEY IMMOBILIZER SYSTEM

The Sentry Key Immobilizer System (SKIS) is designed to provide passive protection against unauthorized vehicle use by disabling the engine, after two (2) seconds of running, whenever an invalid key is used to start the vehicle. The SKIS is active whenever the ignition is on and does not require any customer intervention. The primary components of the system are the Sentry Key Remote Entry Module (SKREEM), Sentry Key (ignition key with a transponder molded into the head), indicator light, Body Control Module (BCM), and the Next Generation Controller (NGC). The SKREEM is mounted on the ignition switch/lock cylinder assembly with the molded, integral antenna mounted around the ignition housing. The indicator light, is located instrument panel switch pod, just to the right of the instrument cluster.
Electrical • Vehicle Theft Security • Operation Report a problem with this article

OPERATION

VEHICLE THEFT SECURITY SYSTEM

Upon failure of proper SKREEM communication to the Next Generation Controller (NGC), the NGC will shut off fuel after two seconds of run time. The engine will not re-crank on the key cycle that the failure occurred, a full key down sequence must be performed for the engine to crank again. After six consecutive fuel shut-offs, the engine will no longer crank on subsequent key cycles. The failure must be corrected and a valid communication process between the SKREEM and the NGC must occur for the engine to crank and start again.
The electronics for the VTSS are part of the Body Control Module (BCM). The system is armed when the vehicle is locked using the:
  • Power door lock switches (with any door ajar)
  • Remote Keyless Entry transmitter.
  • Door Cylinder Lock Switches.
For vehicles equipped with SKIS, the doors do not have to be locked to enable the fuel shut off feature.
After the vehicle is locked and the last door is closed, the set LED indicator in the instrument panel switch pod will flash quickly for 16 seconds, indicating that arming is in progress. If no monitored systems are activated during this period, the system will arm and the LED will flash at a .5 Hertz (Hz) rate. If the liftgate is open, the LED will change its flash rate.
This indicates that the system is armed. If fault is detected on the driver key cylinder input, the indicator LED will remain solid during the arming process, although the system will still arm. If the indicator LED does not illuminate at all upon door closing it indicates that the system is not arming.
Passive disarming occurs upon normal vehicle entry by unlocking either door with the ignition key/remote transmitter. This disarming will also halt the alarm once it has been activated.
A tamper alert exists to notify the driver that the VTSS had been activated. This alert consists of 3 horn pulses when the vehicle is disarmed.
NOTE: The VTSS will not arm by pushing down the door lock mechanism. This will manually override the system.
For Door Cylinder Lock Switch service, (Refer to 8 - ELECTRICAL/POWER LOCKS/DOOR CYLINDER LOCK/UNLOCK SWITCH - REMOVAL).
If the VTSS is triggered, the horn will pulse, headlamps/marker lamps will flash, and the VTSS warning lamp will flash. If BCM determines the threat to be false and the VTSS is not triggered again, the system will shut down and rearm itself after three minutes. If a trigger is still active, the alarm will continue for an additional 15 minutes without the horn. The VTSS monitors the passenger compartment.
NOTE: System will not arm if passenger compartment is not secure.

ARMING THE VTSS - METHOD A

  1. With the key removed from the ignition lock and any door open (excluding liftgate), actuate one of the following:
  • Power door lock button to LOCK,
  • Key fob LOCK button
  • Driver door lock key cylinder to locked position.
  • Close all opened doors. Liftgate can remain open.
  • After the last door is closed, an arming time-out period of sixteen seconds will start, then the VTSS will become armed.

    ARMING THE VTSS - METHOD B

    Actuating the key fob transmitter LOCK button, key locking the front doors with the doors closed and the ignition locked will begin the arming time-out period. If method A, 16 second time-out sequence was in process when method B was actuated, the 16 second time-out will restart from the time of the second actuation.
    If the security lamp does not illuminate at all upon final door closure, it indicates that the system is not arming.
    The current VTSS status armed or disarmed shall be maintained in memory to prevent battery disconnects from disarming the system.

    TRIGGERING THE VTSS

    After the VTSS is armed, the following actions will trigger the alarm:
    • Opening any door (excluding liftgate).
    • Turning the ignition to the RUN position.
  • NOTE: When the VTSS is ARMED, the interior power door lock switch ?UNLOCK? will be disabled until the vehicle is disarmed.
    CAUTION: The VTSS indicator LED will trigger and engine will continue to run if the vehicle is equipped with SKIS and the proper key is used to start the vehicle. This condition will occur if the VTSS has been triggered. If valid key is used, VTSS will disarm.

    CENTRAL LOCKING/UNLOCKING

    This vehicle theft security system feature allows you lock all the doors with the key by using the drivers door lock cylinder.
    All vehicle doors and liftgate are locked with the first turn of the key to the LOCK position from the drivers door. A double activation feature of central unlocking requires you to turn the key in the door lock cylinder to the unlock position two times within two seconds to UNLOCK all vehicle doors at once.
    The first turn of the key in the door lock cylinder will disarm the system (the driver door cylinder lock switch connected to the back of the driver door lock cylinder) and unlock your drivers door. The second actuation within two seconds will then unlock all doors and the liftgate.

    SENTRY KEY IMMOBILIZER SYSTEM

    The SKIS includes keys from the factory which are pre-programmed. Each SKIM will recognize a maximum of eight Sentry Keys. If the customer would like to own additional keys other than those provided with the vehicle, they can be purchased from any authorized dealer. These keys must be programmed to the SKREEM on the vehicle in order for the system to recognize them as valid keys. This can be done by the dealer with a DRB III® scan tool or by a customer if this feature is available in their market and they have two (2) valid keys already available to them. The SKIS performs a self-test each time the ignition switch is turned to the ON position and will store Diagnostic Trouble Codes (DTC's) if a system malfunction is detected. The SKIS can be diagnosed and any stored DTC's can be retrieved using a DRB III® scan tool as described in the appropriate Body Diagnostic Procedures manual.
    With the light being on there is a code stored in the computer that controls anti-theft , Your best bet would be to take your vehicle to the dealer !




    Aug 20, 2016 | Cars & Trucks

    5 Answers

    Security light flashes and it won't start


    top
    CODE ALARM SYSTEM
    information is always subject to change and correction Used on:
    Impreza 1996-2001
    Legacy 1995-1999
    Forester 1998-2000
    codealarmremote2.jpgBattery GP-23A
    Lock: Left button will lock all doors. Double chirp indicates locked.
    Unlock: Right button will unlock driver's door only. Hold unlock button app 6 seconds, it will unlock all doors including rear gate. Single chirp indicated unlock.
    If the car chirps or lights flash 4x the alarm was triggered.
    Panic. Press both buttons to activate emergency honk and flashing lights.
    Valet mode: With optional alarm only Press the red alarm button on the left of the steering wheel. The light will quickly double flash. To re-set back to normal mode, press the red alarm light button again

    Battery failed and lights flashing?
    Parking lights will flash when the vehicle's battery is disconnected and reconnected.
    To stop lights from flashing, either:
    Press remote transmitter “UNLOCK” button once OR turn the ignition switch to the “ON” position and press programming button for one second (see below).
    The vehicle interior (courtesy) light and door open warning light (DOOR AJAR indicator) will then illuminate for 60 seconds when the ignition is turned off, or until the doors are locked with the remote transmitter. Yes, the dashboard instrument panel lights will flash when the parking lights flash.
    Programming or Overriding the Alarm when you have lost the remote
    Open driver's door.
    Turn ignition key to 'On'
    Press and *hold programming button* in (see diagram, button under dashboard)
    After 15 seconds the the door locks will cycle 3 times. Do not release Programming button
    Press lock (left) button the remotes to be programmed. The door locks will cycle one time.
    Exit programming mode by releasing Programming button under dashboard and turning key to off.

    codealarmremote1.jpgCode Alarm Programming Button is under dashboard on the kick panel by the driver's left knee, left of the steering column. If you can't find it, it might still be tucked up in the wiring harness higher up in that same general area. The botton is recessed in a plastic ring (see diagram).
    This button must be pressed while programming remotes or if the battery was disconnected and the lights are flashing.
    top

    Jul 10, 2008 | 1996 Subaru Legacy

    Tip

    How to set & cancel theft deterrent system or how to set & cancel security...


    Theft deterrent system (on some models)

    Theft deterrent system is designed to deter vehicle theft. The system flashes the turn signal lights and turns on the interior light or the signal lights only (depending on the model), and sounds security horn and vehicle horn when it detects abnormalities such as follows:

    • Any door or hood is forcibly opened.
    • The batter terminal is disconnected and then reconnected
    • The system control is disconnected and then reconnected.
    • Abnormal impact is detected when the impact sensor function is on.

    The system flashes the turn signal lights and turns the interior light or the signal lights only (depending on the model), and sounds security horn and vehicle horn if someone attempts to damage or break into your car.

    Setting the system

    You can set the system with or without the impact sensor function. For details, see "Canceling the impact sensor" below.

    1. Turn the ignition key to "LOCK" and remove it.
    2. Have all passengers get out of the vehicle
    3. Push the lock (set) switch on the wireless remote control key once. At this time, the turn signal lights flashes once and the security indicator light comes on.

    The system is set after 30 seconds. At this time, the security indicator light start flashing slowly.

    Once the system is set, you cannot start the engine until you cancel the system.

    The system will not be set in the following cases.

    • When any of the door is open; security horn sounds for 1 second, close the door and set the system again.
    • When the hood is open; close the hood securely.

    Canceling the Impact Sensor

    The impact sensor can be cancelled to prevent false alarms from being triggered incase of the following conditions:

    • When parked in the noisy area
    • The vehicle body or glass is subjected to a strong impact from the (such as in highly pressurized car wash).
    • When transporting by a car carrier or ferry.

    To cancel the impact sensor;

    1. Lock the door by pushing the lock (set) switch on the wireless remote control key once, and turn signal light flash once
    2. Then push the lock (set) switch twice within 5 seconds. At this time, the turn signal flash 5 times to indicate the impact sensor function is disable.

    The impact sensor is deactivated as long as the system remained armed.

    Canceling the system

    The system will be cancelled by the following two ways:

    • Turn the ignition key from "LOCK" to "ON" position.
    • Unlock any of the doors by pushing the unlock (cancel) switch

    If the turn signal lights flash 3 times, the system has been alarmed. Check to see if there is any abnormality with your vehicle.

    If any of the doors is not opened within 30 seconds, all doors will be automatically locked and the system will be set.

    When the system is set

    Activating the system; When the system detects abnormalities such as follows, it flashes the turn signal lights and turns on the interior light or the turn lights only (depending on the model) and sounds the security horn and vehicle horn of 30 seconds.

    • Unlocking any door without using wireless control
    • Any door or hood is forcibly opened.
    • The battery terminal is disconnected and then reconnected.
    • The system control assembly is disconnected and then reconnected
    • Abnormal impact is detected when the impact sensor function is on.

    Reactivating the alarm;

    Once set, the system automatically resets the alarm after the alarm stops.

    The alarm will activate again under the same circumstances described in "Activating the system".

    Stopping the Alarm

    The alarm will be stopped by the following two ways;

    • Turn the ignition key from the "LOCK" to "ON" position.
    • Unlock any of the doors by pushing the unlock (cancel) switch.

    The system can be cancelled by these ways at the same time.

    If the battery becomes discharged due to the vehicle being unused, for a long time etc., when the battery is recharged or replaced, the system will activate the alarm. If this happens, immediately unlock any of the doors by pushing the unlock (cancel) switch, and the alarm will stop.

    Testing the system

    1. Set the system
    2. Insert a wireless remote control key into the key hole on the driver's door handle, and unlock the door.
    3. Open the door, and an alarm will sound.
    4. Stop the alarm by pushing the unlock (cancel) switch.
    5. Repeat this operation for the front passenger's door.

    Good luck.

    on Nov 08, 2010 | Toyota Pickup Cars & Trucks

    3 Answers

    How do i reset the alarm on my 2003 Chevy Trailblazer...I can't stay my truck.


    Hello Narisol,


    Excerpt from the 2003 Owners Manual.


    Passlock

    Your vehicle is equipped with the Passlock theft-deterrent
    system. Passlock is a passive theft-deterrent system.
    Passlock enables fuel if the ignition lock cylinder is turned with a valid key. If a correct key is not used or the ignition lock cylinder
    is tampered with, the fuel system is disabled and the vehicle
    will not start. During normal operation, he SECURITY light
    will turn off approximately five seconds after the key is turned to
    RUN. If the engine stalls and the SECURITY light flashes,
    wait about 10 minutes until the light stops flashing before trying
    to restart the engine. Remember to release the key from START as
    soon as the engine starts. If the engine does not start after
    three tries, the vehicle needs service. If the engine is running and the
    SECURITY light comes on, you will be able to restart the engine
    if you turn the engine off. However, your Passlock system is not
    working properly and must be serviced by your dealer. Your vehicle is not protected by Passlock at this time. You may also want to
    check the fuse. See Fuses and Circuit Breakers on page 5-85.
    See your dealer for service. In an emergency, call the M
    Roadside Assistance Center. See Roadside Assistance Program on
    page 7-5.


    Excerpt from the 2003 Owners Manual.

    Testing the Alarm The alarm can be tested by following these steps:
    1.
    From inside the vehicle, Iower the driver's window and open
    the driver's door.
    2.
    Activate the system by locking the doors with the power door
    lock switch while the door is open, or with the remote keyless entry transmitter.
    3.
    Get out of the vehicle, close the door and wait for the SECURITY light to go out.
    4.
    Then reach in through the window, unlock the door with the manual
    door lock and open the door. This should set off the alarm. When
    the alarm is set the power door unlock switch is not operational.
    If the alarm does not sound when it should but the headlamps flash, check to see if the horn works. The horn fuse may be blown. To
    replace the fuse, see Fuses and Circuit Breakers on page 5-85.
    If the alarm does not sound or the headlamps do not flash, the
    vehicle should be serviced by your dealer.

    Jul 26, 2016 | 2003 Chevrolet TrailBlazer

    3 Answers

    Lose tried to steal my 20005 buick rainer .iignition is missing took off plastic cover .can turn ignition to start but scurty light is on won,t start .there is no chip in key what can i do to start it?


    Your vehicle is equipped with the Passlock theft-deterrent system. Passlock® is a passive theft-deterrent system that enables fuel if the ignition lock cylinder is turned with a valid key. If a correct key is not used or the ignition lock cylinder is tampered with, the fuel system is disabled and the vehicle will not start.

    During normal operation, the security light will turn off approximately five seconds after the key is turned to RUN.
    - If the engine stalls and the security light flashes, wait about 10 minutes until the light stops flashing before trying to restart the engine. Remember to release the key from START as soon as the engine starts.
    - If the engine does not start after three tries, the vehicle needs service.
    - If the engine is running and the security light comes on, you will be able to restart the engine if you turn the engine off. However, your Passlock® system is not working properly and must be serviced by your dealer. Your vehicle is not protected by Passlock® at this time. You may also want to check the fuse. See Fuses and Circuit Breakers on page 5-93 in the Owners Manual.

    Testing the Alarm
    The alarm can be tested by following these steps:
    1. From inside the vehicle, lower the driver's window and open the driver's door.
    2. Activate the system by locking the doors with the power door lock switch while the door is open, or with the remote keyless entry transmitter.
    3. Get out of the vehicle, close the door and wait for the security light to go out.
    4. Then reach in through the window, unlock the door with the manual door lock and open the door. This should set off the alarm.

    When the alarm is set the power door unlock switch is not operational. If the alarm does not sound when it should but the headlamps flash, check to see if the horn works. The horn fuse may be blown.

    Keep us updated.

    Sep 12, 2011 | Buick Rainier Cars & Trucks

    2 Answers

    The doors do not open by remote control key(BMW 740il 1996 model)


    Programming
    When
    Key batteries completely discharged. Key batteries not replaced within 60 seconds. Key added or replaced. DO NOT press remote control buttons during battery replacement.
    How
    Unlock vehicle. Enter vehicle. Close driver's door. Switch ignition ON and OFF. Remove ignition key. Press and hold unlock button Fig. 1 [1]. Press lock button Fig. 1 [2] briefly 3 times within 10 seconds keeping unlock button [1] depressed. Release unlock button Fig. 1 [1]. Some models: LED Fig. 1 [3] flashes slowly for 10 seconds. Some models: Central locking system locks and unlocks rapidly to indicate correct programming. Some models: Repeat above procedure if central locking system does not work and LED does not flash or LED flashes continuously

    To change batteries remove panel back of key then screws on plastic bar
    Batteries are available from your local motor factor shop
    You might not need new batteries try re programing as described above

    Apr 24, 2010 | 1998 BMW 7 Series

    1 Answer

    2003 audi a4 had dead battery, charged battery and now the key fob won't work and the security lights flash for about 5 min everytime I do anything to the car. why ?


    Synchronization
    When
    Key buttons operated repeatedly while vehicle out of range and system becomes inoperative. Key batteries replaced.
    How - early models
    Depress lock or unlock button. Manually lock and unlock driver's door within 30 seconds. System should operate normally after approximately 1 minute. If not, carry out programming procedure.
    How - late models
    If vehicle locked, manually unlock driver's door using key. Press key unlock button once. Switch ignition ON and OFF. Remove key from ignition switch. Press key lock or unlock button once. System should now operate correctly.

    Apr 12, 2010 | 2003 Audi A4 Cabriolet

    2 Answers

    2002 bmw 530i key does not (remotely) unlock doors or trunk but they work fine manually.


    Unlock vehicle. Enter vehicle. Close driver's door. Switch ignition ON and OFF. Remove ignition key. Press and hold unlock button. Press lock button briefly 3 times within 10 seconds keeping unlock button depressed. Release unlock button. Some models: LED flashes slowly for 10 seconds. Some models: Central locking system locks and unlocks rapidly to indicate correct programming. Repeat above procedure if central locking system does not work and LED does not flash or LED flashes continuously.

    Mar 09, 2010 | 2002 BMW 5 Series

    1 Answer

    I bought a new Keyless remote for a 2007 Forester from a Subaru Dealer to replace an original one that went bad after 2 years. I have followed the directions in the owner's manual to program it, but can't...


    IMPREZA: 2005, 2006, 2007 and
    FORESTER: 2005, 2006, 2007, 2008
    Check for Immobilizer key on Forester XT models only.
    information is always subject to change and correction imp05keylessremote1.jpg
    new remote for 2005 Imprezas.
    This is not the same remote as the 05 Legacy/Outback remote which also has truck/gate release on the front and a red panic button on the back.
    Lock: press Lock button for 2 seconds or so to lock car, and arm optional security system. The car with chirp once and turn signals flash for locked, 5 short chirps and signal flashes if any door is not fully closed. The dome light goes on for 15 seconds and ignition key ring (if present) will light for 30 seconds when unlocked.
    Unlock: press unlock one time for driver's door, press again within 5 seconds to unlock all doors inkling rear gate (wagon). The system does not open the trunk.
    Panic mode: press and hold lock button for approx. 3-4 seconds to activate Panic mode. I panic model the horn honks and turn signals flash until either the lock or unlock button is pushed again.
    Finder mode: Press lock button 3 times within 5 seconds to activate Vehicle Finder mode. The horn will honk once and the turn signals will flash 3 times
    Distance: works within approx. 30 feet depending on battery strength, nearby concrete walls and etc.
    Audible Chirp On-Off: the system will chirp when locked or unlocked. To turn OFF the chirps, unlock the door and then push both lock and unlock buttons at the exact same time for 2+ seconds. There will be 2 chirps indicating the the audible is off. To turn the chirp back on, repeat the process and the system will chirp one time when it is back on.
    Battery: as the battery ages it will only work as you get closer to the car. When a battery is replaced, the transmitter must be re-synchronized with the Keyless control unit. To synchronize, press the lock or unlock button 6 times.
    Programming: 4 codes may be programmed.
    Sit in driver's seat and unlock all doors. Open and close the driver's door
    Turn the ignition key from LOCK to ON position 10 times within 15 seconds. Be sure to stop at both lock and on. The horn will HONK once to indicate transmitter programming mode is activated. Leave key in LOCK position and don't remove it from ignition.
    You now have 45 seconds to complete the programming as below.
    Open and close driver's door again.
    Push either lock or unlock button on the remote you want to program. The horn will honk 2 times when successful.
    To continue and program other remotes at the same time: open and close the driver's door and push lock or unlock on the remote. The driver's door must be opened and closed between each remote you want to program.
    Done programming? remove the key from the ignition and the horn will honk 3 times.
    DELETE old codes? Reprogram 4 times, it will overwrite old codes.
    Alarm Security System: optional on all models. When locked there is one chirp (can be turned off, see above), the turn signals will flash and the red 'security' light will start to flash once every 2 seconds except for STi which flashes twice every 2 seconds.
    There will be 5 chirps if a door, hood, and trunk or gate is not fully closed
    You can also arm the system by using the power lock button on the driver or passenger door as you get out of the car and then closing the door behind you.
    Disarm the system: push unlock for 2 seconds
    Lost remote, alarm activated? When you can't use a remote to turn off the system: open the door with a key or try to start the car and the horn will start to honk. Turn the key on-off 3 times within 5 seconds and the alarm will go off and you can start the car. It's simple!
    VALET mode: To set valet mode or just to disable the security alarm system: 1. unlock all doors 2. physically open the driver's door 3. hold the UNLOCK button on remote for 2+ seconds. The red 'security' light will then flash 2 times a second until the car is turned on.
    System has been Tripped (except for STi): if you unlock the door with the remote and it chirps the signal light flash 4 times, the system has been triggered;
    Identification mode: To find out what happened and why the system was triggered:
    Open and drivers door, leave it open. Turn ignition key from LOCK to ON 2 times and then leave in LOCK position.
    Tripped code: 1 security light flash: a door has been opened, 3 flashes when the impact sensor was triggered, 4 flashes when the ignition was messed with or battery disconnected

    Nov 19, 2009 | 2007 Subaru Forester 2.5X L.L. Bean...

    1 Answer

    Ekc on land rover disco 2 v8


    Well, you may not need to take it to a dealer if you have the EKA code.
    Firstly, pop a new battery in the fob. Get the vehicles battery charged up or changed.
    Now we can enter the EKA.
    Close all the doors.
    Turn the key in the driver door lock to the unlock position and hold there for at least 5 seconds until the alarm sounds once. Then return to centre - always ensure you return to centre and do not delay more than 10 seconds between turns, or hold in the position for more than 5 seconds or you will reset to the start. Turn to full extent of travel.
    1st Digit turn to unlock the number of times specified.
    2nd Digit turn to lock the number of times specified.
    3rd Digit turn to unlock the number of times specified.
    4th Digit turn to lock the number of times specified.
    Finally turn to unlock once more. If it is correct a double bleep will sound (single bleep is incorrect code)
    You now have a 5 minute delay - don't open any doors. The anti-theft indicator will continue flashing once every 2 seconds for the five minute period. When this goes out, open the door and start within 30secs.
    After 3 failed attempts, the security system invokes a delay period of 10 mins during which the system will not accept any further attempts to enter a code.

    Mar 02, 2009 | 2003 Land Rover Discovery

    Not finding what you are looking for?
    1990 Buick Reatta Logo

    164 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Buick Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you a Buick Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...