Question about 2005 Nissan Frontier

1 Answer

How do you remove the burnt bulb from the body of the electrical connection?

Posted by on

  • rthompson71 Nov 13, 2009

    The single high and low beam lamp there is only one in each headlamp assembly.

    There is a grey ring I unscrewed and the bulb and housing came out, but I find that there is no logical twisting pushing in a turn to release the lamp so I can go buy a replacement. It should be a rather simple manuever?

  • Roberta Smith
    Roberta Smith May 11, 2010

    which bulb ?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,267 Answers

Carefully unscrew the aluminum build end with nose pliers, else you will have to replace the entire unit, front or tail, since the whole unit is is pre-sealed by the maker as a sealed package, provided u can procure the bulb locally. However it cannot be resealed(i.e. the bracket), properly, and will leak in water during rainy conditions..........sodeep

Posted on Nov 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing backup bulbs on 2005 buick rendevous


TAIL LAMP ASSEMBLY AND /OR BACKUP, SIDEMARKER, STOP, TURN SIGNAL BULB REPLACEMENT

REMOVAL PROCEDURE

1. Open the liftgate.
2. Remove the screws from the tail amp.
3. Slide the tail lamp rearward in order to disengage it from the retainers on the rear body panel.
4. Disconnect the electrical connector from the tail lamp wiring harness.
5. Remove the tail lamp and side marker lamp sockets from the tail lamp, depressing the locking tab and turning counterclockwise.
6. Remove the bulbs from the tail lamp and the side marker lamp sockets, if replacing the bulbs.

INSTALLATION PROCEDURE

1. Install the bulbs to the tail lamp and side marker lamp sockets, if removed.
2. Install the tail lamp and side marker lamp sockets to the tail lamp, turning clockwise until the locking tab is fully seated.
3. Connect the tail lamp electrical connector to the wiring harness.
4. Position the tail lamp retainer slots to the tabs on the rear body panel.
5. Install the tail lamp to the rear body panel, pressing into place until fully seated.
6. Install the tail lamp screws to the Taillamp.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the tail lamp screws to 2 N.m (18 lb in).

7. Close the liftgate.

Apr 16, 2017 | Buick Cars & Trucks

1 Answer

I have a 2005 Chrysler Pacifica my driver side tail light and front amber light don't work passenger side works fine bulbs aren't burnt out


have the fuse box checked ,drivers side lower dash the cover should give list of fuse location , if ok check the wiring from the light fitting to the earth wire connection to the body/chassis,make sure this is a good connection , the bulb holders themselves can sometimes get brittle over time so the bulb may be fine but might need removing and refitting checking that the contacts are meeting etc ,keep me posted if you wish

May 12, 2014 | Cars & Trucks

1 Answer

I have a 1996 Volkswagon Cabrio. I was notified that the back right tail light is burnt out. Can you assist? I would like to try to fix it myself.


If this is helpful, please vote for my answer:
1 Open the trunk and pull up the carpet in the trunk. 2 Remove the screw bolts that hold the trim piece to the back of both of the tail light housings. 3 Remove the trim backings to expose the tail lights. 4 Remove the electrical plug running to the bulb's ballast. Squeeze the top of the connector's release tab and remove the plug. 5 Turn the bulb counterclockwise to remove it from the housing. 6 Remove the screw bolts on the inside of the trunk that hold the tail light housing to the body. 7 Pull the tail light housing off. 8 Replace bulb with same

Mar 07, 2011 | 1996 Volkswagen Cabrio

1 Answer

How to replace stop light?


Tail Lights
The procedure for removing and installing turn signal light bulbs is the same as that for brake light and taillight bulbs. Only the procedure for brake light and taillight bulbs is described here.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Disconnect the battery.
  3. Switch off all electrical connectors.
  4. Turn off ignition.
  5. Remove the rear light, as follows:
  6. Remove the rear striker mount cover.
  7. Reach behind the respective quarter panel trim and unscrew the knurled nut. Make sure the washer and spacer do not fall down.

c17hydro_74.gif

Taillight housing


  • Remove the rear light and disconnect the electrical connector.
  • Turn the bulb holder in the direction shown and remove from the housing


  • c17hydro_75.gif

    Turn the bulb holder in the direction shown

    1. Remove the bulb from holder.

    To install:


    1. Install the bulb in the reverse order of removal. When installing, make sure bulb holder engages in housing by turning in opposite direction.
    2. Install the rear light, as follows:
    3. Connect the electrical connector.
    4. Insert the rear light housing into the body opening.
    5. Insert the retaining bolt into the body opening.
    6. Insert the rear light into the cutout.

    c17hydro_76.gif

    Insert the rear light into the cutout in the direction of arrow


  • Slide the spacer and washer onto the retaining bolt, attach the knurled nut and tighten by hand.
  • Turn the bulb holder in the direction shown and remove from housing.
  • // // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 31; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos';

    Dec 25, 2010 | 2000 Volkswagen Beetle

    1 Answer

    Head lamp replacement on a cadilic catera


    1. Open the hood.
    2. Unscrew the self-locking tab on the left side radiator cover.
    3. Unclip the left side radiator cover from the body to remove the left side radiator cover.
    4. Remove the battery.
    5. Remove the rubber protective cover from the back of the headlamp to reveal the bulb.

    1. Separate the bulb fastening tangs (1).
    2. Carefully remove the bulb.
    3. Remove the electrical connection from the bulb.

    INSTALLATION PROCEDURE:

    1. Install the electrical connection to the bulb.
    2. Snap the fastening tang (1) in place to install the bulb.
    3. Install the rubber protective cover to the back of the headlamp.
    4. Install the battery.
    5. Seat the tab to the body of the left side radiator cover.
    6. Secure the left side radiator cover by turning the self-locking tab.
    7. Close the hood.
    8. Reprogram the applicable accessories. this is for a 1998 what year is yours if its newer its a different procedure tell me if it is

    Dec 24, 2010 | Cadillac Catera Cars & Trucks

    1 Answer

    How do you replace reverse bulb on 2001 deville?


    2001 Cadillac DeVille V8-4.6L VIN 9
    BACKUP LAMP REPLACEMENT
    REMOVAL PROCEDURE
    1. Pull down the rear compartment lid trim. Refer to Compartment Lid Trim Replacement - Rear in Trunk/Liftgate.
    2. Disconnect the electrical connector.
    3. Remove the fasteners that secure the backup lamp assembly.
    4. Remove the backup lamp assembly.
    5. Remove the bulb assembly.
    6. Remove the bulb.
    INSTALLATION PROCEDURE
    1. Install the bulb into the bulb socket.
    2. Install the bulb assembly into the backup lamp assembly.
    3. Pull the wire harness through the body and seat the grommet.
    4. Install the backup lamp assembly to the rear compartment lid.
    NOTE: Refer to Fastener Notice in Service Precautions.
    5. Install the fasteners in order to secure the backup lamp assembly.
    Tighten
    Tighten the fasteners to 4.5 N.m (40 lb in).
    6. Connect the electrical connector.
    7. Install the rear compartment lid trim.

    Sep 11, 2009 | Cadillac DeVille Cars & Trucks

    1 Answer

    Replace right rear break light


    PLEASE DON'T FORGET TO RATE!!!

    Signal & Marker Lights Removal & Installation Rear Lamp Assembly Sedan To Remove:
    1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
    2. Remove the luggage compartment quarter trim panels.
    3. Disconnect the rear lamp assembly electrical connector.
    4. Remove the lamp assembly mounting nuts.
    5. Pull the lamp assembly away from the body.
    6. Disconnect the rear lamp assembly bulb connectors.
    7. Remove the rear lamp assembly.
    6753524.gif
    To Install:
    CAUTION
    To prevent water from entering the luggage compartment, make sure the rubber grommet is fully seated.
    1. Position the rear lamp assembly near the body and connect the bulb connectors.
    2. Install the lamp assembly into the body.
    3. Install the lamp assembly mounting nuts. Tighten to 53 in-lbs (6 Nm).
    4. Connect the rear lamp assembly electrical connector.
    5. Install the luggage compartment quarter trim panels.

    Jul 16, 2009 | 1998 Ford Taurus

    1 Answer

    NEED TO REPLACE A TAIL LIGHT BULB IN A 2005 CHEVROLET IMPALA


    and Repair Notes TAIL LAMP REPLACEMENT REMOVAL PROCEDURE Open the rear compartment. Remove wingnut and pull back the rear compartment trim panel from the tail lamp. Remove the wingnuts from the tail lamp. Remove the tail lamp from the rear body panel. Disconnect the electrical connector from the tail lamp. Remove the tail lamp socket, turning counterclockwise. Remove the bulb from the tail lamp socket. Remove the sidemarker lamp socket, turning counterclockwise. Remove the bulb from the sidemarker lamp socket. INSTALLATION PROCEDURE Install the bulb to the tail lamp socket. Install the bulb to the sidemarker lamp socket. Install the sidemarker lamp socket, turning clockwise. Install the tail lamp socket, turning clockwise. Connect the electrical connector to the tail lamp. Install the tail lamp to the rear body panel. Install the wingnuts to the tail lamp. Pull back the rear compartment trim panel to the tail lamp and install the wingnut. Close the rear compartment.

    Jun 08, 2009 | 2005 Chevrolet Impala

    2 Answers

    Rear turn signal bulb burnt out


    well if you open your trunk and look at the drivers side there should be a little door with a screw and if you open it theres a little casing with two pull tabs scwezz and open put a little grease on the plug end of the bulb and insert then reasemble

    Mar 23, 2009 | 1996 Suzuki Esteem

    1 Answer

    Left rear turn bulb is burnt out


    Pull the trunk carpet back behind the lamp assembly. Remove the 3 nuts from the bolts and pull the lamp assembly away from the body. Then disconnect the connector to the bulb then twist the socket cc to remove the socket then pull the bulb out of socket.

    Mar 15, 2009 | 2002 Ford Taurus

    Not finding what you are looking for?
    2005 Nissan Frontier Logo

    Related Topics:

    36 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nissan Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Phil Lovisek
    Phil Lovisek

    Level 3 Expert

    726 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Are you a Nissan Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...