Question about 1999 Toyota Camry

1 Answer

I have a 1999 toyoyta camry 2.2, CA emissions. I have a trouble code P0401. I have checked the EGR valve and it seems to be fine. What else might the problem be?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 863 Answers

Open and re-tighten gas cap.  Check Cat Converter, muffler, and oxygen sensor.

Posted on Nov 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I correct a P0401 code on my 2.2 chevy corsica


The passages are plugged ! pull EGR valve an inspect passages and the pipe for a restriction or damage and repair as necessary.

May 30, 2015 | Chevrolet Corsica Cars & Trucks

1 Answer

96 cutlass supreme will not pass emission in ut. what should I do? KOER failed, trouble code po401


cleanout egr valve and troutle body . Or replace egr with new one, clean, check vacumm lines , check for clogged check , depending on modle of car you can pippoint problem as some have a common part problem depeding with make of car. But all have to do with exaust system. Insufficient flow exaust flow. Im not an expert, all I know it is related to this, I have it myself so im googling it.

Ford EGR valve

The OBDII fault code P0401 means that the engine computer has detected that the Exhaust Gas Recirculation (EGR) system flow is insufficient. Read more how the EGR system works below. What could cause the code P0401 - clogged or restricted EGR passages
- faulty EGR valve
- EGR valve stuck closed
- problems with the DPFE sensor (Ford)
- problems with hoses to the DPFE sensor (Ford)
- problem with the EGR vacuum switching valve (Toyota)
- clogged catalytic converter
- carboned up EGR temperature sensor
- vacuum supply issues at the vacuum-operated EGR valve
- electrical problems with the EGR valve control circuit
- engine computer problems
helpful website helps you with pinpoint and sou;ution related to auto make and model shows you most common cause of code reading.
www.samarins.com

Apr 16, 2013 | Cars & Trucks

2 Answers

Obd2 codes p0401 and p1744


P1744 -transmission intermittent/torque converter is a manufactures code;they have that problem,like the wipers coming on.
P0401-egr valve flow insufficient;replace or remove,spray B-12 on and around all openings;clean let dry new gasket.

Jun 28, 2012 | 1999 Mercury Sable

2 Answers

Have 1999 Mercury Sable and failed emissions for P0401 code, I replaced the EGR Valve and had the code reset, service engine light came on again Approx 15 miles later. Took it to Auto Zone and they gave...


I am not surprized. The chances that replacing an EGR valve will fix a code P0401 on ANY Ford vehicle is about 1/2 of 1 percent. You most likely either have clogged up EGR ports in your intake manifold, or you have a defective Delta Pressure Feedback EGR (DPFE) sensor.

To find out which it is, apply vacuum to the EGR valve vacuum port with the engine idling. The engine should stumble and/or stall. If it does not, your ports are clogged. If it does, the most likely cause of your problem is the DPFE sensor. However, the EGR vacuum control solenoid could also be the cause.
You cannot properly test the EGR vacuum control solenoid without the proper equipment, but you can check to make sure that there is manifold vacuum going into one side of the solenoid and you can check to make sure that there are no breaks or leaks in the line that runs between the solenoid and the valve. If you find any of these, repair as necessary. If you do not find a problem with the vacuum lines, then you can take a "guess" and replace the DPFE. If this does not work, then you can "guess" again and replace the solenoid. If it still does nort work, then you probably have a bad electrical circuit to the solenoid (once again, requiring the proper equipment to diagnose).

Please also review the following article: What Else Could Be Wrong?

Nov 18, 2011 | 1999 Mercury Sable

2 Answers

1999 mercury sable engine code p1744,p0401. Failed e check. EGR looks new, replaced egr solenoid then cleared codes. what more can i do about the p0401 code and the p1744 code Thanks


for p0401:
In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.
Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open.
Clean out the EGR valve and/or tubing to remove deposits.
Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model).
Replace the DPFE sensor (with a good quality / OEM one).
Replace the EGR valve.

Jul 08, 2011 | 1999 Mercury Sable

1 Answer

Egr trouble light


The EGR Valve and System - it's just three letters, but EGR can result in AGGravation.

Common in automobile emission systems since the early 1970s, the EGR (Exhaust Gas Recirculation) valve controls an engine's emission of smog-causing nitrous oxides, or NOx. Its job is to route a portion of the exhaust gases back into the intake manifold. That lowers combustion temperature to below 2,500 degrees Fahrenheit - the temperature at which NOx gases form.

EGR flow is controlled by the engine's computer, which opens or closes the valve as needed. The EGR system is, for the most part, in the "out of sight, out of mind" category, and typical doesn't require regular maintenance. But if it gets clogged with carbon deposits, you'll see your "check engine" light come on, and a code (perhaps P0401 or P0402 or P0403) will show that there is insufficient flow. That typically results from a vehicle being driven persistently on short trips that don't allow the engine to fully warm up. Flow problems also can be caused by carbon buildup due to failure to change the oil frequently enough.

A clogged EGR valve not only results in higher emissions, it can affect fuel economy and cause rough idling - even serious engine damage. Valves can usually be cleaned, but replacement is often recommended.

A code P0401 most likely means one or more of the following has happened:
* The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
* There is a blockage in the EGR (tube), most likely carbon buildup
* The EGR valve is faulty
* The EGR valve may not be opening due to a lack of vaccuum

Possible Solutions: In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.
* Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open
* Clean out the EGR valve and/or tubing to remove deposits
* Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)
* Replace the DPFE sensor (with a good quality / OEM one)
* Replace the EGR valve

Jan 11, 2011 | 1999 Isuzu Trooper

1 Answer

FAILED EMISSIONS TEST P0401&P0420 CHECK ENGINE LIGHT RESETED MANY TIMES WHEN CUT OFF ENGINE LIGHT COMES BACK ON AFTER 5-6 MILES. I HAVE REPLACED EGR VALVE .STILL WA\ONT PASS INSPECTION. WHATS NEXT?


P0401 indicates that the Exhaust Gas Recirculation Flow Insufficient Detected. This can be because EGR is faulty . As you have replaced this then the problem must be with the vacuum line . EGR valve vacuum line which can be broken or blocked. The vacumn ine must bbe checked for leaks or any blocks using an vacumn pump connected the line.

P0420 indicates that the down stream oxygen sensor reading is not steady and it is connected with the code P0401.

Jan 05, 2011 | 2001 Toyota Camry

1 Answer

What's wrong with the code P0401 for camry 96


P0401 OBD-II Trouble Code
Insufficient EGR Flow
What does that mean?
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor (DPF). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.

May 06, 2010 | 1996 Toyota Camry

1 Answer

How to replace EGR valve on 2000 camry V6?


If you have a P0401 code from a CEL, the first thing is to check the EGR vacuum modulator. It is a little well usually next to the EGR. Pop the cap off and dust the little sponge inside. Sometimes this gets stuffed up with carbon particles and causes recirculation problems. You should clean the tubes hooked to it while you are there. Reset the code and see if the light comes back.

Replacing the EGR is not a tidy job. It is an expensive part to replace and you will disconnect the three hoses and dismantle it from engine by two nuts. Save it for the later if the previous trick fails to work.

Aug 20, 2008 | 1999 Toyota Camry

Not finding what you are looking for?
1999 Toyota Camry Logo

Related Topics:

488 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...