Question about 1992 Buick LeSabre

1 Answer

Whats the easiest way to replace tranny on 92 lesabre. pull the motor with tranny together or do you have to drop the cradle and do it seperate?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 401 Answers

Some of the H body cars around that year have a SPLIT cradle i can't remember what year though
the answer to your question yes take the trans. only
the only way to get both together is drop it out the bottom
so check the right front corner and see if there is bolts in the frame(cradle) if not then the whole cradle will have to come out
hope this helps

Posted on Nov 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission removal


Pull the Engine and Tranny together and do it outside the vehicle.

Dec 24, 2012 | 2006 Ford Escape

2 Answers

I pulled all the bellhousing bolts..motor mount bolts...and can't seperate the 4 speed granny transmission from the engine block...what's the problem..everything is lose but won't seperate..


The input shaft (on the front of the trans) is inserted into the clutch plate, so the trans has to move straight backward (or the engine has to move straight forward) about two or three inches to separate the two, before either one can move up or down.

Make sure that you can get them to rotate slightly with respect to each other, to make sure that there is not one more bolt somewhere that is still holding them together.

If you are pulling the engine, make sure that you have already removed the radiator, otherwise when you pull the engine forward, it could go too far and smash the radiator.

Oct 10, 2010 | Dodge D150 Cars & Trucks

1 Answer

Can I pull the motor and tranny out the top together


certainly.it's the easiest way to remove it from this model car. take care, manny

Apr 10, 2010 | 1989 Toyota Camry

2 Answers

Looking to pull the engine out of 95 camaro 3.4 with manual tranny does it come out the bottom or the top?


You can pull that engine out of the top. It is easier to drop the engine cradle, remove the drive shaft firs, and wiring harness. There should be four bolts located on the cradle at four locations. Lower the cradle with 2 jacks one on each side, lift the car and slide cradle from under the car. i have done this with an Intrige and was easier than trying to pull from the top.

Jan 02, 2010 | 1995 Chevrolet Camaro

1 Answer

Engine removal


What is your question.? It should come out with the converter still bolted to the eng flywheel. If your pulling a front wheel drive vehicle motor you drop the trans out the bottom first, then pull the engine. You can also drop both together by dropping the support cradle. That is the best way and the way it was built and done in a dealership in some cases. Trans got go to have roon

Sep 28, 2009 | 1997 Cadillac DeVille

2 Answers

How do i take clutch fork out. trying to


Im assuming its 5speed, just remove the cables/line, no need to remove the clutch fork out to separate the tranny from the motor, clutch fork only work the throw-out bearing, it stay with the transmission; it little stubborn sometime for both to seperate from one another. just make sure the tranny is well balance and not hanging from the motor while trying separate the two. it will be very difficult trying to pull the tranny away from the motor if its not on the correct level and height and must not have no weight on the transmission shaft. You have to slide the tranny straight out and level from the flywheel, tranny shaft has to come out straight and same way when reinstall.

Sep 24, 2009 | 2000 Honda Accord

2 Answers

Does the motor have to come out for me too pull the transmission


Hi I'm litoshop if your going to pull out the transmission you don't have to pull it out with the engine using a cross rack over the towers of the shock you hang the engine so you can take out the tranny with out bring the engine out, some mega auto parts lend out these special tool if you want to do it yourself you can try pep boy or western auto good luck on your new project if this information has been helpful please let use know thank you

Jul 29, 2009 | 1997 Saturn SL

1 Answer

Caravan engine removal


The recommended way is to unhook and unbolt every thing and support engine and transaxle in a cradle, then raise vehicle up until you can remove the engine/trans from underneath.

Apr 08, 2009 | 1998 Dodge Grand Caravan

2 Answers

Engine replacement


I thought all '87 FWD corolla's were 1.6l 4ac engines like mine. SOHC 2bbl Carb. Well in any case, I just did this with mine. You do have to drop the ball joint on the driverside to get the short shaft out, and then the tranny. the Passenger side cv shaft can stay put. You can then pull the engine out the top. Not enough clearance to pull just the engine or to pull both cause of the driverside manual tranny mount sticking out of the fender over the tranny. The easiest way is to drop both out of the bottom together, but the car needs to be high enough off the ground. Can't pull just the engine with a manual because of the shaft that goes in the clutch. if it were an auto sure, just unbolt the torque converter, sepereate the tranny, and pull the motor straight up. Watch out for the water pump pulley.

Mar 27, 2009 | 1987 Toyota Corolla 2 Door

1 Answer

Replacing transaxle (automatic) 1996 tercel SE


Hold the engine up with a support cradle, and pull the trans out from the bottom. This is how we do it here. Fast and easy. Pulling the engine is a waste of time.

Jan 27, 2009 | 1995 Toyota Tercel

Not finding what you are looking for?
1992 Buick LeSabre Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...