Question about 1989 Honda Prelude

1 Answer

I have a Honda Prelude 1989. How do I safely improve my cars power and performance.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,088 Answers

The best way is to purchase a later model that has a larger, more powerful turbo charged engine to start with. What you are proposing is very expensive (parts and labor) and can lead to many future problems due to increased wear, problems with fuel, and strange quirks. The quickest way to improve what you have is to install a supercharger of some sort, but that can be problematic as well. Nitrous gas injection also produces more HP, but the equipment and gas is expensive and can lead to a damaged engine.

Posted on Nov 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vacuum hose diagram for 89 honda prelude


Hi there:
I suggest check this links, according with the fuel system:
- Fig. 62: Vacuum hose routing-1989 carbureted Prelude (except California)
- Fig. 63: Vacuum hose routing-1989 carbureted Prelude (California)
- Fig. 64: Emission component schematic-1989 carbureted Prelude
- Fig. 65: Vacuum hose routing-1989 fuel injected Prelude


Hope this helps; also keep in mind that your feedback is important and I will appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Dec 21, 2011 | 1989 Honda Prelude

1 Answer

I have a 89 honda prelude turns over but no fire from the coil


My honda prelude 1989 runs speed and later it will be slow and cannot run again.

Sep 02, 2011 | 1989 Honda Prelude

1 Answer

I have a honda prelude 1989 and it just turn off for no reason. i changed the battery and it wont turn on no even the lights


check the fuses under the hood usually on the passenger strut wall , there is a power lead that feeds them check with a test light to see if there is power going in and fuses light up if not trace back to battery and replace

Mar 05, 2011 | 1989 Honda Prelude

2 Answers

Where is the location of the fuel pump relay on a 1989 honda prelude ?


in the fuse panel under hood its marker fuel pump relay

Dec 28, 2010 | 1989 Honda Prelude

1 Answer

Need diagram for ignition replacement for 1989


purchase or order a shop manual it will be well worth it when it omes to your wiring

Jun 21, 2010 | 1989 Honda Prelude

1 Answer

My 1989 prelude looses rpms when i press the brakes


Hi,
Sounds like your power brake Vacuum Booster has a leak. The vacuum
leak will cause the engine to lose RPM.
You should have it checked out as it will eventually start affecting your
brakes.

May 27, 2010 | 1989 Honda Prelude

1 Answer

1989 honda prelude. engine surges. from normal to 2100 rpms


There is a warm up valve on the throttle body(should have 2 small coolant hoses). remove the valve and have someone start the car while you block the port to the valve on the intake. If that clears up the problem you can cut a piece of cardboard to mount in between the valve and intake.should straighten it out.

Oct 01, 2009 | 1989 Honda Prelude

1 Answer

How to raise honda prelude front suspension


To raise the front you may need to replace front spring they may be bad or you can get some performance spring that are over sized. The bottom line is that springs and bigger wheels are the only things that can raise the front of any car. Good luck and thanks for using FIX YA

May 13, 2009 | 1989 Honda Prelude

1 Answer

Honda Prelude 1989


well, there has to be a leak somewhere, broski.

Because you wouldn't be smelling fuel inside the car if there weren't.

I'd look somewhere around the fuel pump housing and work my way to the front of the car, personally.

chances are you're getting close to the leak if the fuel odor is getting stronger.

Aug 10, 2008 | 1989 Honda Prelude

1 Answer

89 honda prelude power steering belt


there is an adjustment bolt on the back side of the idler pulley . you just loosen up the nut on the front of the pulley , then turn the 12 mm bolt under the pump on the back side of the pulley.

Jul 02, 2008 | 1989 Honda Prelude

Not finding what you are looking for?
1989 Honda Prelude Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...