Question about 1996 Lincoln Mark VIII

1 Answer

Turn signal and hazard light not working. all other electrical's ok

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Lincoln Expert
  • 234 Answers

Sounds like a multifunction switch, try working the hazard switch up and down a few times. sometimes the contacts get gummy. If they start working then replace the switch.

Posted on Nov 13, 2009

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Brian032472
  • 150 Answers

SOURCE: turn signal

Well you haven't responded to my clarification request so I will assume they do light but don't flash. If this is the case the flasher unit located usually under the drivers side dash is probably the issue.

Posted on Nov 19, 2008

  • 25 Answers

SOURCE: 1990 buick lesabre turn signals don't work,hazard

I think that your flasher is bad I believe that the 4-ways flasher is a seperate flasher unit it should be in the fuse box and look like the 4-way flasher , to find the flasher turn on the 4-ways and you can feel it or hear it flashing and lok for the flasher for the turn signals
Mike

Posted on Jun 27, 2009

polarcycle
  • 1392 Answers

SOURCE: My turn signals/hazard lights aren't working, fuse--Chevy Tahoe

look for your short somewhere in the wiring harness.

Posted on Jul 23, 2009

  • 4 Answers

SOURCE: 99 Chevy Tahoe... Rear turn signals, brake lights, and hazards

I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Posted on Oct 11, 2009

  • 2 Answers

SOURCE: Turn signals not working checked all bulbs-checked ok

Flasher module is under the dash on the driver's side way up inside opposite the firewall.

Posted on Nov 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My brake lights and turn signals and hazard lights are not working in my 1999 lincoln town car, does anyone know how to fix.


You must have disconnected something when you replaced the heater core. Did you undo any multi-way electrical connectors. Perhaps you blew a fuse?

Nov 21, 2015 | 1999 Lincoln Town Car

1 Answer

On my 2004 impala, the front right turn signal doesn't work, (only works with hazard lights). And the back right signal is fast. The signal "clicking" sound is non stop but on the other hand...


If the turn signal filament of the right front park/turn lamp is known to be OK and the hazard switch is in the normal position, the hazard switch or the turn signal/multi-function switch could be defective

Oct 16, 2012 | Cars & Trucks

2 Answers

Where can I go On-Line to find the Signal Lights and Hazard Flasher relay switch for 1995 Lexus SC400 or what is the part #? The Fuses and Tail lights are all Ok., but the Signal and Hazard lights do not...


your local auto parts store can give you your specific information, as can the parts desk person at your local dealership or possibly even an aftermarket repair shop by using an electronic component locator manual. your local auto parts store will probably be the most willing and friendly.

Sep 04, 2010 | 1995 Lexus Sc 400

1 Answer

Turn signal does not work


Hi there,

I'm assuming neither of your turn signals work?

Firstly, check the 15A Turn fuse in the fuse box. If fuse is ok, then operate your HAZARD light function.

If no Hazard lights operate, then suspect a probelm with the Turn Signal Flasher unit.

If Turn signal flasher tests ok, then fault lies within the Turn switch.


"If this has helped you in any way, please rate this solution"

May 02, 2010 | 1998 Buick Riviera

3 Answers

1993 Geo Prizm turn signals dont work. Hazard lights DO work. Checked fuse several times & its ok. Any suggestions?


You have a bad turn signal switch if the hazards work and the turn signals do not. It has nothing to do with the fuse or the flasher unit. Your switch is bad or you have a bad connection some where.

Feb 15, 2010 | Geo Prizm Cars & Trucks

1 Answer

I have a 92 lumina. The turn signals dont work.


The hazard lights has it's own flasher, change the flasher for the turn signals and see if that works. To find out which flasher it is, put on the hazard lights, and put your finger on the flashers, which ever one you don't feel clicking is the turn signal one.

Nov 14, 2009 | 1992 Chevrolet Lumina

1 Answer

1992caravan turn signals, low beams, and heater motor do notwork


A) Faulty turn signal switch or circuit.
B) Broken dimmer switch or poor electrical connection.Could be relay also.
C) Unplug the electrical connector at the motor and use fused jumper wires to connect the fan motor directly to the battery. If the fan still doesn't work replace the motor. If fan works could be your relay.

Jan 19, 2009 | 1992 Dodge Caravan

1 Answer

Turn signals dont work headlights dont dim heater fan doesnt work


Did all these problems happen all at one time?? If so you may have a bad body ground. Try running a electrical wire from the (-) negative side of the battery to the body and see if this works. Be sure this wire is to a place with no paint as low voltage electricity will not flow through paint.
A). If not try replacing the turn signal flasher for the turn signal problem. This is usually the culprit and it's easiest and cheapest to replace. The turn signal flasher will be found under the driver side dash next to the hazard flasher. Turn the hazard flasher one to locate it. If you want try swapping the turn signal flasher with the hazard flasher to see if this fixes it. They are the same style flasher.
If this doesn't work you may a faulty turn signal switch or some wiring issues.
B). It could as simple as the head lights bulbs need to be replaced, it's rare but I have seen when both bulbs blew at or near the same time. If your able check the voltage at the head sockets.
C). Could be a bad blower motor or switch. I'm not sure if these models have a resistor block or not. The resister block controls the electrical current going to blower motor which controls the speed of the blower fan.

Jan 19, 2009 | 1992 Dodge Caravan

2 Answers

Turn signal lights not working at all


change signal flasher your car has a flasher for hazard and another for signal open fuse panel put for ways on you will hear it clicking the opposite one not flashing will be the one good luck!

Dec 22, 2008 | 1995 Plymouth Acclaim

Not finding what you are looking for?
1996 Lincoln Mark VIII Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...