Question about 1997 Dodge Caravan

1 Answer

Ran key test and got 1 2 6 6 3 1 5 5 noticed that when i turned key to second position no gas gauge rpm odometer or mileage reading turned over but stalled out cleaned battery terminals codes are gone???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 1,757 Answers

Anytime you disconnect the battery and re-connect it will clear the codes until the problem is re-recognized by the PCM. I do not recognize that particular code (12663155). The "Three-Over" key code is from off to on (not start). On the third time leave it in the on (but not start) position. Digital odometers will display the P codes followed by "donE".

Posted on Nov 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I turn off maintenance light?


Your odometer needs to be set on the mileage or trip 1. Turn key off. Hold trip reset button down. Keep button down and turn key to the on position. Hold button until light go's out. If it does not work after 60 seconds switch to other setting. Mileage or trip 1

Apr 19, 2016 | 2008 Toyota 4Runner SR5

1 Answer

How do I reset the oil indicator light on a 1996 Toyota paseo


1.With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
2.Turn the car off (ignition key to the OFF position).
3.Push in AND HOLD the button/knob that switches the odometer
4.Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
5.Release the odometer button/knob.
6.Turn key to OFF position.

Jun 02, 2015 | Toyota Cars & Trucks

1 Answer

How turn off the odometer light after oil change?


this took me sometime to figure out. but you have to turn the key almost to the on position, (one click before starting) and at the same time you press and hold the mileage reset button on the gauge for about 5-10 seconds.. you will see some lines appear when 5 small lines appear.. bam your done, turn key back and then start car,

Jan 31, 2014 | 2008 Scion Xd

1 Answer

Fuel gauge is moving slowly to full


I'd use a couple of resistors representing full and empty. Take connector loose from fuel level sending unit at gas tank, two wires, use resistor between the proper two wires, turn key just to on, you shouldn't have to start it. If gage reacts properly to both resistors, I believe the problem is the sending unit in the gas tank. If it still doesn't function properly, have to check wiring circuits and instrument cluster. The resistor ohms, 16 ohm--and 158 ohms. These are just generic specs.
Some ford instrument clusters can do a self test. The only problem I have is, I don't which years this applies.
With the engine off, depress and hold the odometer reset button. Turn the key to the run position and hold until the gages sweep, within 5--8 seconds. Depress the reset button once to advance to each stage of the self test. Turn the ignition to the off position to exit self test. This test is w/o outside input, so if all gages sweep except the fuel gage, I suspect the instrument cluster has a problem. I'm not sure if your instrument cluster has the self test ability?

Jul 28, 2017 | 2004 Ford Expedition

1 Answer

The odometer and RPM gauge on 03 SXT are stuck. They went 360 back


Try this, it works on other Chrysler products.

Insert key and turn to run position. put odometer on the trip position. turn key off.

While holding trip meter reset button in, turn key to run position ( dash lights will be on ) release trip meter reset button and watch the gauge cluster go through a test cycle.

After this cycle the gauges should return back to normal.

Hope this works for you.

Sep 06, 2011 | 2003 Dodge Neon

1 Answer

Jerking and can't turn off oil cahnge light


hi friend,

1.With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
2.Turn the car off (ignition key to the OFF position).
3.Push in AND HOLD the button/knob that switches the odometer
4.Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
5.Release the odometer button/knob.
6.Turn key to OFF position.
7.That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so thank u for using fixya regards, sivaranjini

Aug 10, 2009 | 1992 Toyota Previa

1 Answer

What does the "maintenance required" light mean and how do you reset it on a 2004 toyota solara?


Maintenance light is turned on when your vehicle is due for service. It is set to turn on at a certain mileage. At minimum, you need an oil change service and what ever is required at your mileage interval. Resetting the light is as simple as, Ignition Key in the off position, press and hold the odometer button, Turn the ignition key on and continue to hold the odometer button for at least ten seconds. If properly done, you will see dashes across your odometer as you hold the button, until the odometer reading reappears. Hope this helps. Please leave feedback.

Jul 30, 2009 | 2004 Toyota Camry Solara

1 Answer

Odometer reads no bus


check bulkhead connecter for corrosion, cluster is your body controll module, losing signal to fuel pump module , and pcm, thios is a communication issue, volt meter wil help, back probe diagnostic connecter, pin 7, white wire, to see if signal is there, GOOD LUCK RDJRP

Jul 16, 2009 | 1999 Dodge Ram

1 Answer

How do i reset my kilometer gauge after changing oil or does it reset to 0 automaticly


Resetting Oil Service Light on your 2002 - 2006 MINI Cooper and Cooper S, and 2007 - 2008 MINI Convertibles:

1) Press and hold the trip button
2) Insert key and turn to position 1
3) Watch for RESET to appear
4) Release the button, then press & hold it again
5) Wait for the RESET to flash
6) Release the button, and then press & release (once only)
7) Service interval should then be reset to next interval
If that didn't work, try this:
1. Push the Trip Button
2. Turn ignition key to position 1 and 51A will appear to left of mileage
3. Release trip button
4. Wait 3 seconds
5. Push trip button
6. Wait (5-8 seconds) for RST to appear in left corner
7. Release trip button
8. Push trip button
9. 15000 will appear as new service interval
10. Release trip button

Or this:
1. Press and hold the trip odometer button.
2. Insert car key and turn it to the fi rst position (not the second position).
3. You will see 51A come up in the trip odometer area.
4. Release, then press and hold again.
5. Watch for the word “RST” to appear on the Odometer indicator.
6. Release, then press and hold again.
7. Wait for the “RST” message to fl ash.
8. Release, and then press & release (once only).

Apr 12, 2009 | 2003 Mini Cooper

1 Answer

How do i reset the maintenance required light after an oil change on my 2009 Toyota Tacoma?


1. Turn the ignition key to the “OFF” position
with the odometer reading shown.
(For details, see “Odometer and two
trip meters” on page 145 in this Section.)
2. Turn the ignition key to the “ON” position
while holding down the trip meter
reset knob.
Hold down the knob for at least 5
seconds. The odometer indicates “000000”
and the light goes off.
If the system fails to reset, the light will
continue flashing.









To reset the Maintenance Lamp turn the car key to ON (not start), set your odometer on mileage (not trip a or b), then depress and hold the button that switches from odo and trip then turn key off. Turn the key back to ON, while you are holding the button down you will notice the maintenance light blink and go out. Reset is complete and you are done.


These are available in your owners manual for the vehicle.


Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Mar 14, 2009 | 2006 Toyota Tacoma

Not finding what you are looking for?
1997 Dodge Caravan Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...