Question about 1997 Cadillac Seville

1 Answer

How do you put a pulley belt on a 1997 cadillac seville sts

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Align belt on track as shown on the sticker on hood or radiator fan housing. There should be a diagram there. Then take a socket and breaker bar and either push down or pull up on the tensioner pulley and put belt on. Once belt is on, release tensioner pulley and you should be good to go.

You can go to autozone.com and register for full free online repair manual with everything you could possibly want.

Posted on Nov 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO RESET SECURITY SYSTEM 1997 STS CADILLAC SEVILLE


Hi Peter,Contact you local dealer's tech dept , I am sure they can help and will be happy to do so.

Jun 08, 2015 | 1997 Cadillac Seville

1 Answer

How to turn off headlights without pulling fuse on a 1997 Cadillac Seville sts


If the car is running set your parking brake should do the trick

Jan 02, 2015 | 1997 Cadillac Seville

1 Answer

1997 cadillac Seville sts wiring diagram. Hi I am


the diagram should be affixed to the top of the stereo

Sep 11, 2014 | 1997 Cadillac Seville

1 Answer

How do i take my water pump belt off my 2000 cadillac seville sts?


There is an idler pulley that is spring loaded, it has a 1/2 square cutout that you insert a 1/2' drive rachet into and push it away from the center of the engine to remove enough tension from the belt to remove it. To install there is a diagram under the hood showing you how to re-thread the new belt.

Jan 24, 2011 | 2000 Cadillac Seville

1 Answer

Show a video on how to replace a tension pulley for a water pump on a 2000 cadillac seville sts


you dont need a video. take the cover off and remove the bolts. if it takes longer than 5 minutes, you arent doing it right.

Dec 09, 2010 | 2001 Cadillac Sts

1 Answer

Need to replace serpentine belt and idler pulley for 1994 Cadillac Seville SLS and need diagram. It's not under hood on our car. We downloaded one diagram but it was not a match.


I had same issue. 1994 Cadillac Seville SLS serp diagrams not like my engine. Found that it is the same as 1993 Cadillac STS Northstar!
Try that, it worked for me. Good Luck.

Sep 06, 2010 | 1994 Cadillac Seville

2 Answers

How to install


4.9 disconnect negative battery cable,drain the coolant from radiatorremove coolant reservoir, loosen waterpump pulley bolts,a screwdriver can help keep the pulley from turning,remove drive belt,remove idle pulley,remove waterpump mounting bolts(they are different sizes,some are star shaped) do not pry on waterpump until all bolts are removed,clean gasket surface,use gagket sealant and install new water pump(start all bolts before you torque any down.)

May 08, 2009 | 1998 Cadillac Seville

1 Answer

Replace power steering pump and lines 1992 cadillac seville sts


you need to have a pulley puller to get the pulley off if you don't have one most auto zone part stores have a loan a tool program and they can help you with that on most powersteering pumps the high pressure line will be a fitting or bolt on and the return line is usually just a squeeze clamp hope this helps good luck

Jan 30, 2009 | 1995 Cadillac DeVille

1 Answer

Overheating


I assume you are talking about a Northstar. Could be a lot of things. Start with the coolant level. Another easy step is to check the coolant pump belt. It is located at the top of the motor (driver's side front). It is under a belt guard next to the valve cover. You can see and feel the belt under the cover without removing anything. The belt is only about 1/4" wide and is driven by a pulley off the overhead cam. You can see the tension pulley as well. My problem was a broken belt and an easy fix.

Nov 02, 2008 | 1997 Cadillac Seville

Not finding what you are looking for?
1997 Cadillac Seville Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...