Question about 1994 Mercury Grand Marquis

2 Answers

The turn signals do not work but the 4 ways do i have already replaced the flasher and the fuse what else can it be

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 14,036 Answers

CHECK ALL BULBS.IF ALL IS GOOD.CHECK FOR A BAD GROUND.USE A JUMPER WIRE BETWEEN THE GROUND SIDES OF THE TURN SIGNAL BULBS AND A GOOD CHASIS GROUND.IF STILL NO SIGNAL LIGHTS.SOUND LIKE FAULTY TURN SIGNAL SWITCH.

Posted on Nov 12, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,627 Answers

If the fuse and the flasher are good and we know the wireing is good because the hazards work then you are down to the turn signal switch [unless you replaced the wrong flasher].

Posted on Nov 12, 2009

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: turn signal don't work or the flashers?

If you still have flasher problems, I read on Google to spray WD-40 down in and around the hazzard flasher button, then press it up and down several times...and BINGO...all flashers and signals worked again....just had some dirt and dust in the wiring....

Posted on Jun 07, 2009

  • 1 Answer

SOURCE: Turn signal stopped working 1990 Mercury Cougar

I had the same problem and the flasher is not located in the fuse box because it is not a normal flasher. the cougar has an electronic flasher unit that is located on the left side of the center console. the best and cheapest place to order a new one is amazon.com. they run about $30-$40

Posted on Jun 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why is turn signal flashing too rapidly?


I'm sure you did already but make sure all turn signals are working, check all of your running lights w/ headlights on then headlights off next Ck the 4 way flashers.. Check headlights too. If all is well R/R the flasher. (located in the fuse box, you'll hear it ticking with the signals on) Good luck

Nov 22, 2015 | Cars & Trucks

2 Answers

Turn signal not working or 4 way flasher


Did you check your fuses to the turn signals and the flasher.They may need to be replace? Plus check all your bulbs make sure there is no burnt ones.If there are then you need to replace them. Hope this helps?

Apr 19, 2015 | 2005 Cadillac CTS

1 Answer

Turn signals don't work.. Still have 4 ways and brake lights wrk... Module is good and fuses good.


An easy way to test if the flasher is bad is to remove the flasher unit under the dash and replace it with the emergency flasher, if it works just replace the turn signal flasher.

Mar 30, 2015 | Cars & Trucks

1 Answer

I have a 2002 honda accord when I push on the brake padel my turn signals or my 4 way flashers won't work. When I put on my lights my turn signals or my 4 way flashers won't work. Could you please...


Hi,
First check the fuse in the fuse box for signal light, replace the fuse with similar value if it is busted. If the fuse is still intact the problem would be the flasher relay( small cylindrical aluminum ) that is already malfunctioning.

Hope that helps you out!

Aug 07, 2011 | 2002 Honda Accord

2 Answers

Turn signals and 4-way flashers do not work - 1997 Buick Century


Time to change the flasher unit, it's usually close to the drivers side of vehicle and behind a fuse box access panel and will have something like "12v 23/98W " on it. It's a largish cube shaped componant and may be water damaged !

Apr 10, 2010 | 1997 Buick Century

3 Answers

Turn signals dont work


that could easily be just the fuse or the flasher unit. both are on the driver side under the dash

Mar 10, 2010 | 1991 Ford Tempo 4 Door

2 Answers

I have 4 way flashers but no turn signals....help!!!


there is a flasher for both 4 way & regular turn signals ( check to make sure the bulbs are good
the backs are easy >>> Just step on the brake, If the lights light up the bulbs are good you my have to remove the bulbs one at a time in the front check your ground wires to the lights if everything is good replace the flasher unit if that fails replace the turn signal switch

Feb 26, 2010 | 1990 Buick Century

1 Answer

1990 buick lesabre turn signals don't work,hazard flashers work, bulbs are ok, running lights & brake lights work, just installed a new turn signal assembly, thought that would fix the problem, it did...


I think that your flasher is bad I believe that the 4-ways flasher is a seperate flasher unit it should be in the fuse box and look like the 4-way flasher , to find the flasher turn on the 4-ways and you can feel it or hear it flashing and lok for the flasher for the turn signals
Mike

Jun 26, 2009 | 1990 Buick LeSabre

1 Answer

1997 olds cutlass turn signals not working


If you haven't done so already, change both flashers that are mounted in the fuse box, the one for turn signals and the one for the 4 ways.
You might have a bad turn signal switch.

Mar 13, 2009 | 1997 Oldsmobile Cutlass

Not finding what you are looking for?
1994 Mercury Grand Marquis Logo

Related Topics:

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...