Question about 2000 Hyundai Accent

1 Answer

How do you install a power steering belt on a 2000 Hyundai Accent? specs; 1.5l I4, sohc, 5 spd manual.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 566 Answers

Hi from uk easy enough job first disconnect battery earth lead then there is a slotted bracket thet is like on alternator adjuster using 12 mm spanner open end slacken off the bolt that is just behind thewater pump pully then the mounting bolt for the pump you can see below the pump ? slacken this now if you pull up the belt it will slacken and you can remove it this belt is small as it drives the p/steer pump from the outer pully of water pump fit new belt ensuring it fits correctly in grooves ? now using a suitable bar / flat tyre bar suitable position bar between p/steer pump and its mounting bracket that is bolted to side engine block lever gently to tighten belt and whilst holding bar leverage with belt adjusted ? tighten the adjuster slide bolt release bar and recheck belt tension ? retighten the lower mounting bolt also 12 mm job done! hope this helps ? ps you do not say if you have A/C but this is run of crank pully to a/c pump so no problem

Posted on Nov 12, 2009

Testimonial: "Thank you."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to time a 2000 hyundai accent 1.5 sohc motor?


tdisline_568.jpgMake sure those 2 marks are alligned durring reinstal

Aug 26, 2014 | 2000 Hyundai Accent

1 Answer

Motor size 1996 hundai


1996 Hyundai Accent ENGINE SPECIFICATIONS 1.5L 92 hp I4 Horsepower 92 @ 5500 RPM Torque (lb-ft) 97 @ 3000 RPM Fuel Type/System Gasoline/MPFI Valves/Valve Configuration 12/SOHC Displacement (cc) 1495 Bore X Stroke (in.) 2.97 X 3.29 Compression Ratio 10.0:1 Turbocharger No Supercharger No

Mar 25, 2011 | 1996 Hyundai Accent

1 Answer

Diagrams on How to Replace the Missing Belts on a 2000 Hyundai Accent


Click on the following direct Link. It has the Belt and Instruction Diagrams for your specific 1.5L engine (SOHC/DOHC) options (AC/No AC, etc.).

Let me know if this helped....
http://www.2carpros.com/car_repair_information/year/2000/make/hyundai/model/accent/2000_hyundai_accent_drive_belt_routing_diagram.htm

Mar 26, 2010 | 2000 Hyundai Accent

1 Answer

I have a 2000 hyundi accent


Hi

Sounds like the timming belt is loose and or a pully is bad. However it could simply be a worn alternator or power steering belt.

Feb 19, 2010 | 2000 Hyundai Accent

1 Answer

Looking for a pic of the tensioner spring and


Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

Oct 25, 2009 | 2000 Hyundai Accent

1 Answer

2000 hyundai accent sohc need help in identifying spark plug wire connection to coil


Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

Sep 22, 2009 | 2000 Hyundai Accent

1 Answer

A/c and power streering belt how do I intall i think im missing


here is the diagram for your car. I hope this helps.
0900c15280196fd5.jpg

Apr 10, 2009 | 2000 Hyundai Accent

1 Answer

Just want to replace the belt do i have to remove the alternator


Back in 2000 Hyundai did not use automatic tensioners on the 2000 accent. You have to loosen the bolt on the side of the tensioner. Then you turn the other bolt counter clockwise to loosen the bolt which will loosen the tensioner. Then you have to loosen the big bolt that is on the other side of the alternator. You may have to take off your power steering belt to get to the alternator belt. Now do the opposite to install your belt.
I hope this helps.

Apr 07, 2009 | 2000 Hyundai Accent

2 Answers

Hyundai accent 2001


have you checked the belt tensioner? It could be going bad.

Aug 29, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
2000 Hyundai Accent Logo

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...