Question about 2003 Hummer H2

1 Answer

2003 H2 was given troubleshooting info of a evap

2003 H2 was given troubleshooting info of a evap large leake detected the explation is the ecm has detected a large leak in the evap system during a system monitor test .
probable cause
defective, loose or missing fuel cap.(have changed the fuel cap twice)
evap canister broke, hose cracked or not connected(where would i find the canister to check for cracks or no connection)
purge or vent solenoid defective( where would this be located)
vacuum leak at engine

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hummer Master
  • 44,210 Answers

Large leak response normally means that the petrol cap has not been fitted correctly

Posted on May 27, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 275 Answers

SOURCE: 2004 Pontiac Grand Prix Evaporative Canister

you should be able to fix it look for a can near the fuel tank that has vacuum hoses coming out of it and you should be able to just buy the bad solenoid

Posted on Nov 03, 2008

  • 1 Answer

SOURCE: check engine soon light. diagnosed as troble shooting codepo44

Change the evap vent solenoid canister located near the master cylinder on the right side of the engine or your hoses may be cracked. Good luck!

Posted on Mar 12, 2009

  • 158 Answers

SOURCE: Car Idles Hot Temp

I don't know how the above could have any effect on temperature. Is the vehicle full of coolant? In my opinion you have two different issues

Posted on Apr 03, 2009

  • 3 Answers

SOURCE: Service Engine and Service Vehicle lights

You can generally find a vaccum leak by pressure testing the system. Most auto parts stores sell a vaccum tester relatively cheap. Or you can take it to a shop and they will pump your sytem full of a uv sensitive die and then use a black light to find the leak. If it says vaccum leak at engine on the vent solenoid then all you need is the schematic of your vaccum system to find the solenoid and you should find your leak theoretically.

Posted on Apr 04, 2009

  • 12650 Answers

SOURCE: 2003 DARANGO SLT 4.7 -2 WD, AUTO, 99K MILES, CODE PO441 WITH KEY

0441 the most common fix for this code in chrysler/dodge vehicles is to replace the leak detection pump / ldp -----other areas to check would be damage / restriction in evap line / canister---faulty purge solenoid or connection damage or resistance in line -bad vacuum switch

Posted on Apr 29, 2010

Testimonial: "Thanks for all your help, all checked except for a possable vacum switch or relay, whats the location of these? not in my wireing diagram or photo."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have DTC Codes; P0441, P0442, and P0446 EVAP codes. Have had too many things replaced to name and still have codes. Originally, only had one code P0442, after the unsuccessful removal of severalevap


code p 0442 refers to evaporative emission(EVAP) system---small leak detected====causes--hose connections--intake leak--EVAP canister--EVAP canister purge valve
it also refers to --large leak detected====causes fuel cap loose, off---mechanical fault--hose connections---EVAP pressure sensor
code p 0441 refers to EVAP system--incorrect flow detected====causes hoses, intake leak-- EVAP canister purge valve
code p 0446 refers to EVAP system, vent control---circuit malfunction===causes--wiring---EVAP canister purge valve----ECM
if you can remember when the problem started ( after refueling) it may be that the cap is not fitted correctly
it could that in the fixing process , the wiring has not been correctly installed or the problem is the canister purge valve needs attention

Feb 06, 2017 | Cars & Trucks

1 Answer

How to fix obd2 trouble code P1680 on a 2004 Isuzu ascender 4.2l eng


code p 0300 refers to random/ multiple misfires detected ===causes --spark plug/s--HT lead/s--injector/s --ignition coil/s--low compression --wiring
most likely low fuel pressure and injector problems
code p 0442 refers to evaporative emission (EVAP) system ---small leak detected ===causes hose connection/s--intake leak-- EVAP canister ---EVAP canister purge valve
it also refers to --large leak detected ===causes ---petrol cap loose ,/missing---mechanical fault ---EVAP pressure sensor
code p 0455 refers to EVAP ---large leak detected --all those stated plus EVAP canister purge valve
code p1680 refers to electric throttle control (ETC) monitor ---processor fault ===causes --wiring--ECT monitor

Sep 30, 2016 | Isuzu Cars & Trucks

1 Answer

My 06 cobalt has these codes can anyone tell me what they mean? Are they an expensive fix? p0446,p0455, p0172


code p0446 refers to evaporative emission (EVAP) system-vent control-circuit malfunction===causes --wiring--EVAP canister purge valve--ECM
code p0455 refers to EVAP system-large leak detected===causes --hose connections--intake leak--EVAP canister---EVap canister purge valve
code p0172 refers to system too rich, bank 1===causes intake blocked---EVAP canister purge valve--fuel pressure ---EGR system---injector/s ---ECM
because the EVAP purge valve appears in all codes I would be inclined to change that unit first the run the fault codes again

Jul 23, 2015 | 2006 Chevrolet Chevrolet Cobalt LT

1 Answer

P0441 what dose it mean and how can I fix it .toyota camery le 1998model


P0441 1998 Toyota Camry - Evaporative Emission Control System Incorrect Purge Flow

When is the code detected? Pressure in charcoal canister and fuel tank does not drop during purge control (2 trip detection logic).

Possible symptoms: - Engine Light ON (or Service Engine Soon Warning Light)
- Possible a noticeable fuel odor caused by the release of fuel vapors

P0441 1998 Toyota Camry Description: The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions:
- Large and small leaks

- Excess vacuum

- Purge flow during non-commanded conditions

- Fuel Level and Fuel Pressure sensor faults

- EVAP Purge and Vent Valve faults

The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.

P0441 1998 Toyota Camry Evaporative Emission Control System Incorrect...

Possible causes - Missing Fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- Incorrect fuel tank vacuum relief valve
P0441 Toyota Evaporative Emission Control System Incorrect Purge Flow

Jun 01, 2015 | 1998 Toyota Camry

2 Answers

How to repair engine code po442 2009 mazda 5?


Check the purge solenoid under the hood common problem in mazda 5 6 cx7.

Jul 11, 2014 | Mazda Cars & Trucks

1 Answer

PO442


code p0442 refers to evaporative emission (EVAP) system--small leak detected====causes hose connection/s---intake leak--EVAP canister---EVAP canister purge valve
it also refers to evaporative emission system --large leak detected (fuel cap loose/ off)===causes---mechanical fault--hose connection/s--EVAP pressure sensor.

Jun 14, 2014 | 2003 Toyota ECHO

1 Answer

I got a check engine code P0455 AND P0171 on my 2003 volkswagen jetta. My car runs fine usually at idle, but if you start driving, you can only push it half throttle before it starts studdering. What



Trouble Code: P0171

Fuel System Too Lean (Cylinder Bank 1)
Possible Causes:


Air leaks after the MAF sensor, or leaks in the PCV system Exhaust leaks before or near where the HO2S is mounted Fuel injector(s) restricted or not supplying enough fuel. Fuel pump not supplying enough fuel during high fuel demand conditions. Leaking EGR gasket, or leaking EGR valve diaphragm. MAF sensor dirty (causes ECM to underestimate airflow). Vehicle running out of fuel or engine oil dip stick not seated .


Trouble Code: P0455

EVAP Control System Large Leak Detected
Possible Causes:


Aftermarket EVAP hardware non-conforming to specifications EVAP canister tube, EVAP canister purge outlet tube or EVAP return tube disconnected or cracked, or canister is damaged EVAP canister purge valve stuck closed, or canister damaged. Fuel filler cap missing, loose (not tightened) or the wrong part. Loose fuel vapor hose/tube connections to EVAP components . Canister vent (CV) solenoid stuck open. Fuel tank pressure (FTP) sensor has failed mechanically .Here are the solutions.

Aug 09, 2012 | Cars & Trucks

2 Answers

Code says evaporator purge solenoid


Which code specifically? Do not assume you need a new solenoid. Our recommendation will depend on the specific code and some troubleshooting results. I usually recommend checking over all the EVAP vacuum lines and the gas cap too whenever there is a purge valve code. Check the vacuum lines at the cannister in the left rear bumper. I will paste info on the purge solenoid below.

P0440 Evaporative emission (EVAP) system - malfunction

Possible causes: Hose connection(s), intake leak, EVAP canister purge valve


P0441 Evaporative emission (EVAP) system - incorrect flow detected

Possible causes: Hose connection(s), intake leak, EVAP canister purge valve


P0442 Evaporative emission (EVAP) system - small leak detected

Possible causes: Hose connection(s), intake leak, EVAP canister, EVAP canister purge valve


P0443 Evaporative emission (EVAP) canister purge valve - circuit malfunction

Possible causes: Wiring, EVAP canister purge valve, ECM


P0444 Evaporative emission (EVAP) canister purge valve -open circuit

Possible causes: Wiring open circuit, EVAP canister purge valve, ECM


P0445 Evaporative emission (EVAP) canister purge valve -short circuit

Possible causes: Wiring short circuit, EVAP canister purge valve, ECM


P0450 Evaporative emission (EVAP) pressure sensor - circuit malfunction

Possible causes: Wiring, EVAP pressure sensor, ECM


P0455 Evaporative emission (EVAP) system - large leak detected

Possible causes: Hose connection(s), intake leak, EVAP canister, EVAP canister purge valve


P0456 Evaporative emission system - very small leak detected

Possible causes: Mechanical fault, hose connection(s), EVAP pressure "sensor


P0457 Evaporative emission system - leak detected (fuel cap loose/off)

Possible causes: Mechanical fault, hose connection(s), EVAP pressure sensor


P0458 Evaporative emission system, purge control valve -circuit low

Possible causes: Wiring short to earth, EVAP valve


P0459 Evaporative emission system, purge control valve -circuit high
Possible causes: Wiring short to positive, EVAP valve


Evaporative Emission Purge Solenoid

Description & Operation
The duty cycle EVAP canister purge solenoid (DCP) regulates the rate of vapor flow from the EVAP canister to the intake manifold. The Powertrain Control Module (PCM) operates the solenoid.
During the cold start warm-up period and the hot start time delay, the PCM does not energize the solenoid. When de-energized, no vapors are purged. The PCM de-energizes the solenoid during open loop operation.
The engine enters closed loop operation after it reaches a specified temperature and the time delay ends. During closed loop operation, the PCM cycles (energizes and de-energizes) the solenoid 5 or 10 times per second, depending upon operating conditions. The PCM varies the vapor flow rate by changing solenoid pulse width. Pulse width is the amount of time that the solenoid is energized. The PCM adjusts solenoid pulse width based on engine operating condition.
Removal & Installation
The duty cycle evaporative (EVAP) canister purge solenoid is located in the engine compartment near the brake master cylinder.

  1. Disconnect electrical connector at solenoid.
  2. Disconnect vacuum lines at solenoid.
  3. Lift solenoid slot from mounting bracket for Removal & Installation.

To Install:
  1. Position solenoid slot to mounting bracket.
  2. Connect vacuum lines to solenoid. Be sure vacuum lines are firmly connected and not leaking or damaged. If leaking, a Diagnostic Trouble Code (DTC) may be set with certain emission packages.
  3. Connect electrical connector to solenoid.
Purge solenoid location:

jturcotte_65.gif
EVAP cannister location:
jturcotte_66.gif

Nov 05, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Evap large leak detected. troubleshoot code: PO455 . ECM has detected a large leak in the evap system during a symtem monitor test. Engine light has not come off , after new fuel cap, and fuel filter...


the charcoal canister that absorbs the fumes is in engine area-u see a hose attached to it ina corner--inspect hose rite down to the gas tank as well as all parts of system--itz an EPA thing and doesnt effect car performance

Oct 05, 2010 | 2006 Chevrolet Equinox

2 Answers

I have a 2003 dodge ram 1500 with a V-8 4.7 engine and my check engine light came on with a P0456 code and I have been told that it could be the gas cap, I have checked it and it seems fine but should I...


The leak in your evap system is very small at .020. It is more than likely a small split in a hose somewhere. The cap is probably ok, we rarely find a bad one. If it is a small split in a hose it will only get larger over time. Here is the factory info on the code. We have found that alot of these leaks are from a small hose on the evap canister under the vehicle, but with out looking at your vehicle it is hard to say. If the leak goes away or is no longer large enough to be detected, your light will go out after a few days. These leaks are emmissions related and will not effect the integrity of the vehicle. I would have it checked and corrected if the light stays on at your convienience.

Symptom List:
P0442-EVAP LEAK MONITOR MEDIUM (0.040) LEAK DETECTED
P0455-EVAP LEAK MONITOR LARGE LEAK DETECTED
P0456-EVAP LEAK MONITOR SMALL (.020) LEAK DETECTED
Test Note: All symptoms listed above are diagnosed using the same tests.
The title for the tests will be P0442-EVAP LEAK MONITOR
MEDIUM (0.040) LEAK DETECTED.
When Monitored and Set Condition:
P0442-EVAP LEAK MONITOR MEDIUM (0.040) LEAK DETECTED
When Monitored: Immediately after a cold start, with battery/ambient temperature
between 40° F and 90° F and coolant temperature within 10° F of battery/ambient.
Set Condition: If there is a leak larger than 0.0409 and smaller than 0.0809 in the
evaporative system.
P0455-EVAP LEAK MONITOR LARGE LEAK DETECTED
When Monitored: Immediately after a cold start, with battery/ambient temperature
between 40° F and 90° F and coolant temperature within 10° F of battery/ambient.
Set Condition: There is a leak larger than 0.0809 in the evaporative system.
P0456-EVAP LEAK MONITOR SMALL (.020) LEAK DETECTED
When Monitored: Immediately after a cold start, with battery/ambient temperature
between 40° F and 90° F and coolant temperature within 10° F of battery/ambient.
Set Condition: There is a leak larger than 0.0209 and smaller than 0.0409 in the
evaporative system.
POSSIBLE CAUSES
LEAK AT GAS CAP
VEHICLE HISTORY AND SERVICE BULLETIN INVESTIGATION
VISUAL AND PHYSICAL INSPECTION
VERIFY EVAPORATIVE EMISSION SYSTEM LEAK
EVAP PURGE SOLENOID OPERATION
INTERMITTENT LDP MONITOR FAILURE
EVAPORATIVE EMISSION LEAK DETECTION
GAS CAP
LDP COMPONENT LEAK

Jun 12, 2009 | 2003 Dodge Ram Maxi

Not finding what you are looking for?
2003 Hummer H2 Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...