Question about 1994 Jeep Cherokee Country

2 Answers

94 yj will not crank over but I have a clicking sound, checked batt. and all leads, fuses look good, if I push start yj it will run great.. I installed a new starter and it will only click, will not crank.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Lose power to battery and memory

Posted on Jul 19, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Jeep Master
  • 3,433 Answers

It appears you have a poor battery cable ground connection. Remove the cable from the baterry ans lean the bat connection thoroughly. If this is a side post, put a ble in the terminal threads and see if the terminal is loose. If it is, The terminal is broken loose inside and the battery needs replacing. Good Luck, Ned

Posted on Nov 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I install a push button start on my 94 c1500 suburban?


Sure can. cut the yellow wire off the ignition switch under the dash. Run a fused wire (40 Amp is good) from the battery to the push button. Put the yellow wire to the push button. Beware though, you are bypassing the neutral safety switch. It will crank anytime you push the button.

Dec 19, 2014 | Cars & Trucks

2 Answers

I hate to repost this but I am in a desperate situation, I have changed out the ISM, changed the battery, pressed the yellow button, even tried jumping the little box on the positive cable, as well as...


code p601 is your computer code have you tried cleaning your battery cables if the computer not getting the right connection can sometimes set that code try that first take your dvom meter and touch the center of the negative and positive see what your batt voltage is should be around 12.4 to 12.6 if lower batt need charged if good take your negative lead and touch center of negative batt post take positive lead and touch out side of batt connector post should be the same reading shouldn't drop no more than .5 volts then do vise a versa that checks your connection to the batt post. try this. first

Oct 30, 2013 | 2003 Saab 9-3

1 Answer

Clicking sound/no start


with jumper wire try to jump starter solenoid to see if starter is good. ignition key on

Oct 07, 2013 | Saturn Cars & Trucks

1 Answer

Jeep YJ stalls while clutch is depressed


thrust bearings are bad and the flywheel is moving out of range of the crankshaft sensor, or the crankshaft sensor is sitting too close to the flywheel.

Mar 12, 2013 | 1998 Jeep Wrangler

1 Answer

Ignition wont crank ford F 150


Make sure your getting 12V at the starter (fm batt) & have a good, clean ground from the batt. Good luck

Jun 10, 2017 | 2005 Ford F-150

1 Answer

96 monte Carlo has good batt. but will not crank, no clicking, no noises at all


Probably going to be your ignition. Its the litytle box under your steering column with all the wires running to it. Check the fuses 1st to rule out the REAL easy fix but I'd put my $ on the ignition. Hope I could help. Good luck

Jun 26, 2012 | 1996 Chevrolet Monte Carlo

2 Answers

Changed starter on the Van however it still won't start. Battery is charged and when you turn the key on it clicks once. Is there a relay switch or something between the battery/Key/starter?


You have a starter relay that could be bad, follow your + cable from the battery, it should lead to a small relay that looks like what is on a riding mower. If this gets cracked on the inside or the contacts are bad, this will prevent starting and a clicking sound will occur. If it's broke completely, it won't click.

May 02, 2010 | 1999 Ford Windstar

3 Answers

1990 Jeep YJ 6 cyc. Won't Start---No Spark From Coil


It would be great if you could find the Ignition Control Module!!! From my experience on my Jeep...90 YJ 4.2 liter carb. it does not have one...Computer controlled only...

May 17, 2009 | 1990 Jeep Wrangler

1 Answer

1990 Yj Jeep Wrangler


Is it cranking the engine ?? If not then something is wrong the connection to the starter.Look for a bad connection to the starter. It could also be the starter solenoid. The best advise i can give you is to get it scanned for an error code for free at many parts stores. all youhave to do is ask if they do that.I know they do it at Autozone.

Dec 17, 2008 | 1990 Jeep Wrangler

Not finding what you are looking for?
1994 Jeep Cherokee Country Logo

Related Topics:

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...