Question about 2000 Plymouth Voyager

Open Question

Crank no start on a 2000 plymouth voyager note crank sensor bin replace auto shut down relay is good coil is good has no spark ,no injector pulse

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 883 Answers

SOURCE: 1992 Plymouth Grand Voyager A/C Relay Location

rate me FIXYA!....thanks!
3c104d0.jpg

Posted on Jul 05, 2008

  • 30 Answers

SOURCE: 1996 plymouth voyager 3.3 v6 code of rand/multiple misfire

try air flow meter

Posted on Mar 30, 2009

motor1258
  • 6674 Answers

SOURCE: 1998 plymouth grand voyager cruise control relay/fuse location?

Check under hood in box marked fuses & relay, on drivers side and look under cover of it for I.D.

Posted on Apr 11, 2009

  • 740 Answers

SOURCE: 1993 honda accord 2.2,no injector pulse

This sounds like a main relay problem here is a diagram its located under the dash under steering column its the brownish -orange box in the picture. http://www.tegger.com/hondafaq/mainrelaylocation/7-main_relay_closeup.jpg Good luck and thanks for using FIX YA

Posted on May 15, 2009

frcs68
  • 1605 Answers

SOURCE: i got 1995 nissan maxima

The knock sensor error could be the sensor, sensor circuit, or some misfire caused by a dirty/bad injector or some ignition problem.

One issue that might tie it all together is coolant leak causing the misfire/knock like a head gasket, but I think you would be throwing more codes or you would see more problems than what you have.

Posted on May 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

97 Oldsmobile 88 after driving once motor is shut off will not crank until cool, had the control module tested it came back good, replace fuel pressure switch and still will not crank until cool?


You will need to replace the crank angle/position sensor near the crank pulley. A photo of the sensor is attached. The sensors wear out due to heat and cold cycles and internal corrosion.

MasterPro Ignition - Crankshaft Position Sensor Oreilly's Auto Parts part number is:
Line: MPI ' Part # 2-96054
96054-1_cranksensor-ssgfw3isdofovrvhx0ejjvhb-2-0.jpg

Feb 14, 2017 | 1997 Oldsmobile 88

1 Answer

1997 Plymouth voyager cranks but don't start


Make sure the battery has a full charge. If it cranks good but won't start, have a helper crank it while you visually check for spark at the spark plugs. If you have spark everywhere, use a gage and check proper fuel pressure, also, check fuel injector pulse. If your missing all three, check for proper cam and crank sensor signals. Don't replace anything unless your testing points in that direction.
How long since a tune-up? Can you check applicable trouble codes?

Jan 22, 2016 | Plymouth Cars & Trucks

1 Answer

1996 plymouth grand voyager 3.3 does not fire have change ecm cole cam sensor crank sensor


Did you test power an grounds ? B+ to coil pack . Check for battery voltage at dark green with orange stripe wire at coil pack . No B+ voltage there you need a ASD relay - auto shut down relay !

Jan 05, 2016 | Plymouth Cars & Trucks

1 Answer

How do you tell if the auto shutdown relay is bad


Any relay can be tested to some degree, but to be certain, just buy an inexpensive relay and try it in there,
The Automatic Shut Down relay is just one of many relays on your car. It takes battery power from the battery, and when activated by the computer, will pass that power on to the fuel injectors and to the ignition coil, some applications also it will work on the fuel pump. If the ASD relay is bad, no injector pulse, no power to coil, etc.-car won't start. When key is turned to off, the relay is not active-I think that may be why it's called auto shutdown relay.

Jun 08, 2012 | 2000 Plymouth Voyager

1 Answer

The car cranks but won't start. There is no spark, no fuel, no injector pulse. I have manually made the contacts in the shut down relay still nothing. I jumped the fuel relay and the fuel pump runs and I...


If you remove the fuel line and crank the engine and get fuel then you could be assured that the crank sensor works but if there is no fuel while cranking then the crank sensor is most likely the fault. If the crank sensor is not the problem then it is most likely in the coil or distributor which the 97 is notorious for.

Sep 06, 2010 | 1997 Chrysler Cirrus

2 Answers

97 plymouth voyager. no spark to cylinders


WELL I AM LOOKING AT AUTOMATIC SHUT RELAY BAD OR THE BAD COIL POWER TRANSISTOR.YOU WILL NEED A SCANNER TO TELL YOU IF YOUR CMP SENSOR OR CKP SENSOR IS WORKING.

Mar 01, 2010 | 1997 Dodge Caravan

1 Answer

1994 Plymouth Grand Voyager 3.8 eng won't start


Check primary voltage at ignition coil and fuel injectors, engine cranking, use a test lite, dark green wire with orange tracer. If no voltage, that comes from asd relay. Some makes and models if the computer doesn't see the cam and crank sensor signals, the computer won't ground the relay.
You need to do some testing.

Mar 18, 2017 | 1994 Plymouth Grand Voyager

2 Answers

I cant get spark out of the coil pack


cam sensor fires the injectors to synchronise injector pulsing with the spark at the spark plugs.. U need to probably change the crankshaft sensor (around the crank pulley) as the crank sensor is what controls the ignition spark.
hope that does it.
:)

Jan 20, 2009 | 1996 Plymouth Voyager

1 Answer

1996 plymouth voyager 3.3 se


check your cap and rotor. if the they do not get a good enouph connection than it won't send a spak to the engine and or coil pack. you need to also check your spark plugs and wires.

Aug 01, 2008 | 2000 Plymouth Voyager

Not finding what you are looking for?
2000 Plymouth Voyager Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...