Question about Nissan Maxima

1 Answer

I have a remote start and keyless entry i installed on a 1989 Maxima SE. The remote start works fine, but the keyless entry only works when I hook up the unlock and lock wires to the passenger door lock harness box wires, grey/red and light blue. Is there any other wires that I can use besides the wires in the door?

Posted by on

  • tm31420 Nov 12, 2009

    thanks man, i needed to know whether there was another way. Looks like i got my work cut out wiring this piece.

    Teddy M.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

HI. This is the only preferred way to connect. The connection must be ran through the door. This is the actuator location. If this vehicle was fitted with a stock in door electric lock/unlock control, this will be the only way to connect the key-less wiring, in this case.

Posted on Nov 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 HHR Remote Starter not working


Is this an issue with all 2008 HHR remotes??? Highly doubtful , probably the vehicles keyless entry system . Taking the vehicle to a qualified repair shop an having the keyless entry system checked for DTC'S - diagnostic trouble code's . Do you know what a DTC is ?
The keyless entry system is a vehicle entry device. The keyless entry system is used in conjunction with the body control module (BCM) to remotely activate certain vehicle features. Keyless entry will lock/unlock the doors, or release the rear compartment lid when a corresponding button on the keyless entry transmitter is pressed. This is accomplished by the transmitter sending a radio frequency to the remote control door lock receiver (RCDLR). The RCDLR interprets the signal and activates the requested function via a serial data message to the BCM. A low transmitter or vehicle battery or radio frequency (RF) interference from aftermarket devices, such as 2-way radios, power inverters, computers, etc., may cause a system malfunction. High RF traffic areas may also cause interference that could lead to a malfunction. Keyless entry allows you to operate the following components:
• Door locks
• Liftgate lock
• Remote rear doors (Panel only)
• Vehicle locator/panic alarm
• Illuminated entry lamps
• Remote vehicle start
The keyless entry system has the following components:
• Keyless entry transmitters
• Keyless entry antenna
• 2 Way Advanced Remote Start RCDLR
• BCM

Guessing will not fix this .

Jan 12, 2018 | 2006 Chevrolet HHR

1 Answer

I just bought a new keyless entry remote and i need to program it. how?


Hello: The keyless entry feature was NOT a factory option available on the 1989 Cadillac SedandeVille. If you have keyless entry it has to be after market. you will have to find out who made the add on unit and how to program it. SORRY

Jan 21, 2011 | 1989 Cadillac Sedan DeVille

1 Answer

Nissan maxima keyless entry problem. vehicle will


sounds to me like you need a new ignition switch. not the ignition in which you put the key into but the switch that is mounted to the back of the ignition switch. there is a white round switch mounted to the back of the ignition cylinder. I thing it has a problem. so you don't need the while ignition cylinder, but the electrical portion of it only.

Aug 09, 2017 | 2000 Nissan Maxima

1 Answer

Keyless remote entry


First try to replace batteries on remotes, 2. try reconfiguring the remotes only if the first doesn't work. And at last just try unplugging the negative of the vehicles battery plus check all your fuses the make sure that you're not have having any electric interference. Good luck !!!

Apr 03, 2009 | 2004 Nissan Maxima

2 Answers

Cannot get my car to lock without the keyless entry


check the room 10a fuse that is the problem

Feb 22, 2009 | 1997 Nissan Pathfinder

1 Answer

My car is acting crazy!


" turn the key on engine off 8 times. the doors will lock and unlock. push one of the buttons on the key fob and the doors will lock and unlock. do this for each remote that you have. when you are done turn the key off. the door locks will lock and unlock. the remote fob should work after this."
From My SecuriLock..

Sep 05, 2008 | 2006 Ford Taurus

2 Answers

Door lock


Make sure the battery on your Keyless Entry remote is a working battery.

If thats not it, it could very well be the actual button on your Keyless Entry remote being faulty. But it could also be a relay in the car aswell. Depending on the cost of a Relay versus the cost of a Keyless Entry remote, I would try to replace either/or and try again, whichever is cheaper. The Relay may be cheaper, but your Key-FOB sounds like it could be the cause.

May 16, 2008 | 1994 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

79847 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...