Question about Hyundai Motor 2003 Sonata

1 Answer

Low pressure from washer fluid when cold weather sets in, washer motor has been replaced twice hoses arent clogged. what the hell could it be

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Hyundai Master
  • 3,433 Answers

Check the bottle or where the pump is . make sure the suctio or pick up tube isn restricted. It should have a filtering screen in its tip. Second, pour som clr in the tand mixed with water to remove any cuilbup at the nozzles. The clr will clean the whole system. If a nozzle quits use compressedair to clear it. Good Luck

Posted on Nov 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ihave a 2000 Nissan frontier 2wd and it has 3.3 motor,in the morning when its cold it will not go in gear,it has an automatic,but if I put it in d2 it will go in gear. does anyone know what the proble


Try having the transmission fluid flushed and replaced with high quality tran fluid. If that does not help let the car warmup before you drive it as this condition is also called transmission slipping. This happens due to the truck being in very cold weather. The system freezes and contracts, plus the fuel line fluid begins to leak from the seals resulting in a low line pressure. If the vehicle faces a low line pressure or inadequate fuel supply within the system, the gears would refuse to function correctly and that would cause slipping.

Nov 13, 2014 | Cars & Trucks

3 Answers

WINDSHIELD WASHER NOT WORKING. HAS FLUID


Your hoses could be frozen if its cold where you are. Check the hoses for cracks. You might find fluid in your engine compartment if you have a broken hose. Listen to hear if the motor is pumping. There should be some sound either a click or a whiz sound when you push the washer button. If you hear no sound then check the wires on the pump. If they look good you probably need to replace the pump.

Sep 30, 2014 | 2006 Buick Lucerne

1 Answer

There is very low pressure on the washer fluid what could it be


Look over all the rubber hoses going between the spray motor and the nozzles. You likely have a leak, or even clogged if not that then the pump could be going

Jun 08, 2012 | 2008 Ford Fusion

1 Answer

Wiper fuel not working looking for the motor. checked the fuse it was oK, Sounds like the motor is working but nothing coming out.


the washer pump is in the bottom of the reservoir. look up from underneath and you will see two wires and a hose coming out of the bottom of the reservoir. pull off the hose and hit the washer button. if the fluid squirts out, then you have a blockage in the washer lines, just follow the hoses and locate it. often when the weather is cold and you do not use the more expensive washer fluid, the fluid just freezes in the lines and nothing comes out until it warms up. water freezes below 32 degrees in case you never noticed. go to walmart, autozone, advance they all sell a winter version of the fluid with a lower freezing temperature. if the pump motor is turning but nothing is squirting out and it is over 32 degrees then i would pull the whole contraption out of the car and give it a good flushing out, something is blocking the pump inlet. if that still does not do it then take a look on ebay for a working replacement.

Dec 11, 2010 | 1999 Saturn SL

3 Answers

We were told that our windshield washer filter was clogged when we reported that it was working poorly to the dealer that we bought our used 2005 Hyundai from. They fixed it, but it's doing it again, just...


sometimes there is, and sometimes there isnt, if there is one it will be on the bottom of your windshield washer tank.. sounds like they fed you a line of **** to me... and if they arent i would take it back and ask them why its doing it again, and why they didnt clean the tank out before... theres something else going on.. either a leak in one of the hoses, your low on fluid, or the pump is weak... i think they fed you a line.. hope this helps

Dec 06, 2010 | 2005 Hyundai Santa Fe

1 Answer

Window washers dont work


Cold temps can cause freezing, pour warm water on the nozzle and hoses. Next, some blue washer fluid can clog the nozzles, use a pin to clear them but be careful as you may break the point off. lastly the spray motor my be bad, would have to replace it. Check with AutoZone or O'Reiley....

Feb 15, 2010 | 2000 Ford Focus

1 Answer

I am having honda touring 2006.The windshield fluid is not comming out looks like it got froze in between somwhere


this is what happens in cold weather especially when using low grade windshield washer fluid, the best thing to do is find a heated garage to put it in until they start working but first test windshield washer motor to see if it works.

Jan 14, 2010 | 2006 Honda Odyssey

1 Answer

Winshield Washer Fluid extremely low pressure


The washer pump is located in the right front fender, mounted infront of the wheel. Remove the front portion of the wheel well splash cover to gain excess. This pump does the work for the front and rear washers. Verify that the pump is working and then check for a pinched hose.
However, if you hear the pump working,as you say, open the hood and take the hoses off the squirter nozzles to see if there is good flow of fluid. If there is, then your nozzles are plugged. You may be able to clean them out with some air pressure. Careful working with the nozzles, as they are plastic and break easy.

Steve

Jan 11, 2010 | 2004 Hyundai Santa Fe

1 Answer

No front washer jets


well the easiest way to tell if the motor is working properly and the hose and the {Jets are not frozen / clogged up is to remove the hose to the pump or from one of the jets to see if fluid comes out when activated ....some washer fluid will freeze up in the line etc if it is not winter blend ..rendering warmer weather temperature fluid useless
this is the easiest way in determining this

Dec 22, 2009 | 2000 Renault Sportwagon

Not finding what you are looking for?
Hyundai Motor 2003 Sonata Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8755 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...