Question about 2000 Ford Windstar

1 Answer

Left back signal not working right brake not working new bulbs no broken wires

Posted by on

  • joey44357 Nov 12, 2009

    the right brake light does not come on the right t6ail light does noe come o0n and the left signal light does not work.shop checked for broken wires none seem to be broken bulbs are new. the ford windstar is a 2000. is there a module for these lights

  • Ned C Cook
    Ned C Cook May 11, 2010

    what idoes "not working right" mean?What is it doing or not doing?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

I have seen a couple of these. If this has a tilt steering wheel,what happens is the wiring to the turn signal switch pulls out of the hard shell connector,maybe one or two wires.In your case it is the left turn signal circuit.Remove the cover around the column (3 to 4 screws) and inspect the wiring.This might be difficult to do,so you might want to take it to your local repair shop to diagnosis the problem.

Posted on Nov 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1999 Dodge Ram 1500 - Right rear tail light won't burn for tail lights alone, but will still blink for turn signal and light up for brakes. Bulb was replaced with no effect. Left still works.


The bulb has two filaments; one for brakes and turn signal, the other for tail lights. One filament is probably burned out. Replace the bulb with a new one

Aug 09, 2017 | Dodge Cars & Trucks

1 Answer

Rear turn signal wont work,front flashes rapidly


you have a broken wire or pinched wire trace wires down from tail light until you find problem and check all the other bulbs in the other lights

Dec 07, 2013 | 2001 Ford Explorer Sport

1 Answer

Right front side turn signal does not work replaced all bulbs and checked fuses headlight flashers work when hazards are on front to back except driverside turn signal ,in dash right stays solid left


I don't believe it would be a bad ground for just one light. It could be a wire, a socket connector, or the bulb socket itself. See if the wire has power at the socket when signaling left, with key on. If there is power, probably a bad socket or connector. If no power, check for power coming from flasher-the wire going to front left, or driver's side. If you have power from the flasher, but nothing at the socket, the wire has probably broken.
Good luck.

Feb 06, 2013 | Cars & Trucks

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

2 Answers

1995 Dodge Dakota signal light and brake lights quit


I had the same problem that the brake light / turn signal on the right side didn't work (in the 2006 Dodge Caravan it's the same bulb). After a long search I found the problem: There was corrosion on the contact of the bulb assembly. After scraping off the corrosion everything works now.

Dec 20, 2011 | 1995 Dodge Dakota

1 Answer

1998 chevy lumina: rear window brake light not working, left brake light not working, rear left turn signal not working


See if bulbs have burnt out in the left brake light and rear turn signal (one bulb if combined) and also rear center high mount brake light.

If the left turn signal has a slower speed than the right turn signal, this is a symptom of a bulb or bulbs burnt out.

Usually, the wiring is not a problem, but I would not rule wiring (or sockets) as a problem out.

Good luck on this repair.

Jan 19, 2011 | 1998 Chevrolet Lumina

2 Answers

Left turn signal flasses real fast but the right is normal. All the bulbs are good. Could it be the flasher?


I think the socket for the light that is not flashing is slightly melted. the contacts are probably not touching the light bulb properly. you might be able to tug on the contacts to make better connect with the bulb

Sep 16, 2010 | 2005 Chevrolet Express

1 Answer

Left signal works right doesn't both brake lights do not work


you may have two or more problems
check flasher unit for turn signal trouble and the bulb and wiring if first two don't fix problem
it is possible that your turn signal switch in steering column may be bad

as for brake lights, it could be one of three problems
either brake light switch on brake pedal is not working or wire loose or wiring to lights could have either been broken or come loose-you may want to check both bulbs first-although this is rare but does happen

Aug 23, 2010 | Chevrolet Silverado Cars & Trucks

1 Answer

Brake light, reverse light and turn signal issues


Hello. The symptoms you are describing are likely due to a poor ground. Temporarily install a new ground wire by securing a piece of copper wire to the frame with a self tapping screw. Use this ground wire along with the hot wire to see if each of these lights works. If it does, trace the ground wire back to the frame, unscrew it and clean up the metal with emery cloth so you reestablish a good ground.

Jan 28, 2010 | 2003 Ford Windstar

4 Answers

Brake light, Turn signal not working rear right 06' Focus


I have a 2000 ford focus no brake lights. with the brake lights the transmission would not go into drive .replaced the brake light switch checked fuse replaced turn signal switch with no results then i moved onto the wiper switch and replaced it as much to my supp rise it fixed the problems

Jul 26, 2009 | 2000 Ford Focus

Not finding what you are looking for?
2000 Ford Windstar Logo

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...