Question about 2001 Jeep Grand Cherokee

2 Answers

How to replace headlights bulbs in a grand cherokee 2001

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

  1. Remove the jack screw attaching the top of the head lamp to the head lamp mounting module.
  2. Grasp the upper inboard and lower outboard corners of the head lamp and pull the head lamp outward.
  3. Remove the bad bulb socket from the head lamp module and remove bulb from socket.
  4. Install new bulb into socket and reinstall socket into head lamp module.
  5. Position the head lamp on the vehicle and align the ball studs with the sockets.
  6. Push the head lamp inward to secure the ball studs with the sockets.
  7. Install the jack screw attaching the top of head lamp to the head lamp mounting module.
Do not touch glass of halogen bulbs at the oil can cause the headlight to blow out

Posted on Nov 12, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My driver's side lo-beam headlight is out. the bulb seems fine and the fuse is o.k. as well. Any suggestions?

Posted on Dec 21, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 2001 grand cherokee headlights start flashing on and off

The fact that this is a crappy car

Posted on Aug 18, 2008

FoRdMaStEr
  • 51 Answers

SOURCE: how to replace head light bulb in 2001 grand cherokee?

Pop the hood and look at the top of the headlight capsule. you should see a single 7mm bolt somewhere in the middle. remove the bolt completely it should be about 6 inches long. once the bolt is removed then use a large flat screwdriver and carefully pry the headlight capsule out from it retaing clips. once the capsule is out then you have 100% access to the bulbs

Posted on Jan 15, 2009

  • 2 Answers

SOURCE: How to replace headlights on 2000 Jeep Grand Cherokee

One long bolt at the top - requires a 7mm socket to remove the bolt. The light housing will pry out with a screw driver. There are three ball and socket type connectors that hold the housing in and I just pryed off the plastic housing carefully and "balls" pop out of the sockets. Finally, I was replacing the faded plastic housing and it came with a new wiring harness. It's impossible to reach the connector to use the new wiring harness that comes with the new plastic light housing. So just use the existing wiring harness with the new light assembly.

Posted on Feb 06, 2009

  • 61 Answers

SOURCE: replace headlight bulb on driver's side

Pop the hood and you will notice that behind the light covering there is a connector that screws into the back of the light cover. Unscrew it and the bulb can be removed and replaced with a new one. Be sure to not touch the new bulb with your bare hands as this will cause the bulb to burn out quicker (its a chemical reaction of some kind). Hope this helps, let me know how it goes. Good luck!

Posted on May 06, 2009

  • 3 Answers

SOURCE: Replace headlight on 2001 Jeep Grand Cherokee

Give it qa little tug/wiggle and it will come out.

Posted on Jul 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Third brake light on '01 Jeep Grand Cherokee not working.


check the light socket it could be lose on the wires or just the light

Jul 12, 2012 | 2001 Jeep Grand Cherokee

1 Answer

Removing and reinstalling a new headlight assembly in a 95 jeep grand cheerokee


LIGHTING Headlights REMOVAL & INSTALLATION Cherokee, Wagoneer and Comanche Models Fig. 1: Remove the top corner headlight bezel mounting screw 91076p12.jpg
Fig. 2: To access the turn signal bulb or headlight bezel mounting screws, remove the 2 turn signal housing retaining screws 91076p13.jpg
Fig. 3: After removing the turn signal housing from the headlight bezel, remove the 2 bezel mounting screws . . . 91076p27.jpg
Fig. 4: . . . then carefully pull the headlight bezel away from the headlight assembly 91076p11.jpg
Fig. 5: Remove the 4 headlight assembly retaining ring screws . . . 91076p07.jpg
Fig. 6: . . . then pull the retaining ring off of the headlight assembly 91076p06.jpg
Fig. 7: Pull the headlight assembly away from the vehicle just far enough to disengage the electrical connector from behind the headlight 91076p28.jpg
  1. Remove the headlamp bezel and retaining ring attaching screws. Remove the bezel and retaining ring.
  2. Pull the headlight out, disconnect the wire harness and remove the headlight from the vehicle.
  3. Install the headlight in the reverse order of removal.
Grand Cherokee and Grand Wagoneer Models
  1. Open the hood, reach into the engine compartment and locate the lock ring supporting the bulb assembly.
  2. Rotate the lock ring 1?8 turn counterclockwise and pull the bulb straight out from the housing. To install:
  3. Install a new bulb and position the bulb assembly in the lamp housing.
  4. Rotate the lock ring 1?8 turn clockwise to secure.
----
The Grand Cherokee will have an assembly that is fastened with bolts and screws to the body.
Get the new assembly and compare to the old one to see where to unfasten the bolts and other fasteners to aid in removing quickly.

Oct 08, 2010 | 1995 Jeep Grand Cherokee

1 Answer

My 1995 Jeep Grand Cherokee running lights do not work


Don't know if this will help but its how i fixed my 2001. Go to: http://www.2carpros.com/forum/2001-jeep-grand-cherokee-laredo-brake-lights-not-working-vt4814.html Tip: If you have a small piece of medal to put under the ground contact point then it will keep it raised in place, i used a really big staple from a staple gun to slide under mine I also replaced all the sockets that the bulbs go into cause mine were falling apart and may have been a part of the problem.

Apr 07, 2010 | 1995 Jeep Grand Cherokee

1 Answer

Looking for instructions on how to replace headlights on a 1996 Jeep Grand Cherokee; purchased replacement fixtures, but can't figure out how to remove/replace.


Is this the headlight bulb replacement or headlight (assembly) replacement? For bulb replacement:
1. Disconnect negative side of battery.
2. Open hood.
3. Reach behind the neadlight assembly and disconnect the wiring connectors.
4. There is a locking ring around the back of the headlight assembly. Turn this counterclockwise.
5. Gently pull out the bulb.
6. Insert new bulb into the locking ring.
7. Place these back onto back opening and turn clockwise making sure it is flush and totally engaged.
8. Replug wiring connector.
9. Reconnect negative side of battery.
10. LIGHTS!!

Nov 25, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Replace headlight on 2001 Jeep Grand Cherokee


Give it qa little tug/wiggle and it will come out.

Jul 04, 2009 | 2001 Jeep Grand Cherokee

1 Answer

I have a 1999 jeep grand cherokee and the brake lights wont work


there's a possibility that it might be the socket that the bulb actually goes into. my break light did something similar to that. the socket only cost about 8 bucks from the dealer.

May 08, 2009 | 2001 Jeep Grand Cherokee

1 Answer

Replace headlight bulb on driver's side


Pop the hood and you will notice that behind the light covering there is a connector that screws into the back of the light cover. Unscrew it and the bulb can be removed and replaced with a new one. Be sure to not touch the new bulb with your bare hands as this will cause the bulb to burn out quicker (its a chemical reaction of some kind). Hope this helps, let me know how it goes. Good luck!

May 06, 2009 | 2002 Jeep Grand Cherokee

1 Answer

How to replace head light bulb in 2001 grand cherokee?


Pop the hood and look at the top of the headlight capsule. you should see a single 7mm bolt somewhere in the middle. remove the bolt completely it should be about 6 inches long. once the bolt is removed then use a large flat screwdriver and carefully pry the headlight capsule out from it retaing clips. once the capsule is out then you have 100% access to the bulbs

Jan 14, 2009 | 2001 Jeep Grand Cherokee

1 Answer

Burned out headlight


Check this info, is in spanish but in there you can see the graphic: WJ-2002-Cherokee-Service-Manual-PDF-08LA-Luces

Good luck.

Jan 09, 2009 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

420 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...