Question about 2004 Honda CR-V

2 Answers

Honda CRV rear view mirror removal

I would like to replace the mirror with a monitor for a back up camera...how does the mirror come off leaving the mounting pad still on the windshield?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

There are three ways usually...

You'll need to remove a screw securing the base onto the mount (usually on metal bases)

You'll need to lift up a clip on the bottom of the base and then slide the base off the mount (usually on plastic rectangular bases

You'll need to twist the base about 45 - 90 degrees so that it slips off of the mount (usually on bases that are circular)

Posted on Nov 12, 2009

Testimonial: "Excellent response and timely! I am attempting to find the right "tool" to pry up the internal clip...a flatblade screwdriver doesn't seem to do it."

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

There should be a very small set screw u will need a very small allen wrench

Posted on Nov 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I how do I mount EZ-pass since the radio antenna surrounds the rear view mirror and is built into the glass and is a dot pattern? I have a 2007 Honda CRV. Thanks for any guidance.


SORRY BUT- You are on the wrong website for this type of inquiry. This is a community based self-help website for the repair and use of manufactured products made for consumer use

Jul 09, 2017 | Honda Cars & Trucks

Tip

How To Install Replace Broken Side rear View Mirror Honda CR-V 2002-06...


How To Install Replace Broken Side rear View Mirror Honda CR-V 2002-06 1AAuto.com

on May 10, 2012 | 2004 Honda CR-V

1 Answer

How to fix electric wing mirror Honda crv


How To Install Replace Side View Mirror Honda CR-V 02-06 ...

? 10:31
https://www.youtube.com/watch?v=tuGFzxCVh7k
May 8, 2012 - Uploaded by 1A Auto Parts
In this video, 1A Auto shows you how to repair, install, fix, change or replace a broken, smashed, cracked, or ...

Replace 2002-2006 Honda CR-V Side Mirror, How to ...

? 14:20
https://www.youtube.com/watch?v=UKLPkZszbrA
Sep 25, 2013 - Uploaded by Go-Parts
Side Mirror purchased from www.Go-Parts.com Links to purchase products: ...

2000 Honda CR-V side mirror replacement - YouTube





Dec 16, 2015 | Honda HRV Cars & Trucks

1 Answer

Does anyone know how to reattach the inside rear view mirror to the mount on an '04 Honda CRV? My son pulled the mirror off the mounting, which is still attached to the windshield. It looks like it...


another way it might attach is with a small metal or plastic wedge and glue maybe fashion the wedge from milk jug cap and a dab of 5 min epoxy firmly hold the mirror in place until it stays

Sep 06, 2012 | Cars & Trucks

1 Answer

Need a diagram for installing a drivers side electric power mirror on a 1995 mercury villager van


here's 1996, all I have. Please rate.

Mirror, Power — Outside Rear View NOTE: This procedure applies to both RH and LH power outside rear view mirrors.

Removal
  1. Remove the front door trim panel (23942). Refer to Section 01-05 for the removal procedure.
  1. Remove the two outside rear view mirror inside mounting hole cover screws and the outside rear view mirror mounting hole cover (17K709) from the front door (20124).




  1. Remove the wire clip.
  1. Disconnect the power outside rear view mirror electrical connector.




  1. Remove the three power outside rear view mirror bolts and the power outside rear view mirror.




Installation
To install, reverse the removal procedure. Tighten the three power outside rear view mirror bolts to 3-4 Nm (27-35 lb-in). Glass, Outside Mirror
Removal and Installation
Refer to the glass replacement procedures in Manual Mirror for power outside rear view mirror glass (17K707) Trim Cover
Removal
  1. Remove the front door trim panel. Refer to Section 01-05 for the removal procedure.
  1. Remove the two outside rear view mirror inside mounting hole cover screws.


    Remove the outside rear view mirror mounting hole cover.
Installation
To install, reverse the removal procedure. Mirror Control
Removal
  1. Use a small flat-blade screwdriver to pry the power outside rear view mirror control switch from the instrument panel (04320).


May 13, 2010 | 1995 Mercury Villager

1 Answer

How do i get the rear view mirror back on?


I am assuming you are talking about the interior rear view mirror and not the side rear view mirror. Most auto parts stores sell an adhesive glue to fix the interior rear view mirror. Most of these mirrors have two parts to them. One part is the bracket that glues to the windshield and the other part is the rear view mirror assembly. Before gluing the bracket to the glass check and see how the mirror assembly attaches to the bracket. There will often be a screw that fixed the two together.

Feb 20, 2010 | 1999 Honda Prelude

1 Answer

How do i replace left door mirior


remove trim panel, remove mirror fasteners.

Glass, Outside Mirror—Town Car

Removal and Installation
  1. Push upper edge of outside rear view mirror glass (17K707) into the outside rear view mirror to expose latch release.
  1. Using a small flat-bladed screw driver or equivalent, move latch release to released position.
  1. Remove outside rear view mirror glass mounting back and outside rear view mirror glass from outside rear view mirror.
  1. Disconnect heater wire connectors and auto dimmer connector, if equipped.
  1. To install reverse Removal procedure.
------------------------------------------------------------
Mirror, Power—Outside Rear View
Town Car

Removal and Installation
  1. Disconnect battery ground cable (14301). Refer to Section 14-01 .
  1. Remove front door trim panel (23942). Refer to Section 01-05 .
Trim Panels, Door Front—Town Car
Removal
  1. Snap out two door pull strap retaining screw covers. Remove screws.
  1. Remove three screws on front and rear side and center of front door trim panel (23942).
  1. NOTE: The following procedure must be used during removal and installation of the door armrest and trim panel. Refer to the appropriate illustrations for component and vehicle model identification.

    Using the Trim Pad Removing Tool from Rotunda Windshield and Moulding/Trim Removal Kit 107-R0401 or equivalent, pry the trim panel retaining clips from the door inner panel.
  1. NOTE: Do not use front door trim panel to remove trim clips from door inner panel. Replace any bent, damaged or missing push pins.

    Remove window regulator control switch housing from front door trim panel. Lift up housing in front and disconnect all connectors.
  1. Disconnect wiring harness and heated seat switch electrical connectors if equipped.
  1. Remove the door trim panel.
  1. Disconnect two electrical connectors.
  1. Remove nut from outside rear view mirror mounting base.
  1. Swing outside rear view mirror (17682) toward driver door window glass to expose screw in mount base.
  1. Remove screw from outside rear view mirror base.
  1. Remove outside rear view mirror from front door (20124). Guide wiring and connectors through hole in front door.
  1. To install, reverse Removal procedure. Tighten nuts to 8-10 Nm (71-88 lb-

Nov 05, 2009 | 1996 Lincoln Town Car

1 Answer

Need to replace passenger side outside mirror for 2005 Honda CRV


You'll have to remove the plastic cover (from inside the vehicle), there there are three 10mm bolts that hold the base onto the door.

Apr 03, 2009 | 2005 Honda CR-V

1 Answer

Replace rear view mirrors on Honda odyssey 2003


YOU HAVE 2 TAKE OFF THE DOOR PANEL AND TRACE THE WIRE 2 THE PLUG

Mar 30, 2009 | 2003 Honda Odyssey

Not finding what you are looking for?
2004 Honda CR-V Logo

1,550 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...