Question about 1992 Chevrolet Camaro

1 Answer

The car will get in gear and drive for about 100 yards

My son has a 92 camaro. The car will get in gear and drive for about 100 yards and then the transmission quits. If you turn the car off for about 10 minutes, the car will get in gear and you can drive it again for another 100 yards or so. I think it might be a transmission leak but have not seen anything in the driveway. Could it just be just a leak and he has no fluid in it or the transmission shot? I would like to know where to start.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 174 Answers

I would start by checking the fluid level. THis is most likely a 700 r4 Overdrive transmission, The dipstick is located at the back of the engine bay on the passenger side. The vehicle needs to be running in order to check trans fluid. Pull the stick, wipe it and put it back in the tube, then quickly pull it again, if you don't see any fluid on the stick you are at least 2 quarts low. If the transmission fluid id dark black and smells bad, then your clutches inside are probably toast. That's where I'd start.

Posted on Nov 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tranny won't shift any more why it drove 100 yards then nothing


That is why you got it on the cheap - it does not run!!!!!!

Hope you paid for the car with plastic!!!!!!! Otherwise, ..............

Dec 08, 2015 | Cars & Trucks

1 Answer

Son's 1992 New Yorker, changed battery now big electrical issues


You need to check all of the fuses in your glove box and the relays behind it. You will need to remove the glove box to get access to them. There are relays under the hood as well and they all need to be checked especially the ASD one which is left side toward the cab end one. Since your transmission is stuck in one gear this usually means it is limp home mode and needs to be serviced or replaced. Check the fluid to make sure it is not brown and has a burnt smell. If it does then most likely it needs a new one.

Jul 06, 2014 | 1992 Chrysler New Yorker

3 Answers

I need a fuse panel diagram for 92 camaro


Hello! Here is the fuse Panel Diagram for your vehicle...Guru...Saailer


10_25_2011_4_57_30_pm.gif

Oct 25, 2011 | 1992 Chevrolet Camaro

1 Answer

WE OWN 92 CAMARO RS 25TH EDITION IT WONT START ITS GOT FIRE POWER AND SPARK SO NOW WHAT ITS DRIVE ME CRAZY WHAT TO DO. WE CHECK THE SPARK PLUG AND BATTERY AND ITS GOT GAS BUT IT WONT START WHAT DO U THINK...


92 Camaro, V8 5.7 multi port, new pump, good preasure. runs when primed, wont start without prime. After sitting a few minutes, engine fires wont start. How to check EGR Valve and what does it do?

Feb 15, 2011 | 1992 Chevrolet Camaro

2 Answers

What year camaro rearends will interchange with 1997 camaro z28


CALL YOUR LOCAL JUNK (SALVAGE ) YARD THEY HAVE ALL THE INTERCHANGE DATA AND CAN FIND ONE FOR YOU AS WELL

Oct 16, 2010 | 1996 Chevrolet Camaro

1 Answer

Transmission wont shift to third


If you have lost third you have an internal problem. It will either be the input carrier, third/forth clutches, or a valve body issue. You may price a rebuild job at a trans shop, or a trans from a wrecking yard. 700R4 trans is getting hard to find from wrecking yards. Good Luck

May 19, 2009 | 1984 Chevrolet Camaro

1 Answer

I put the car in gear and drive 30 to 50 yards and then it stalls. the car starts and idles good. i can rev it up to 3000 rpm's whith out it stalling but as soon as i try to driv it it stalls.


There is an electrical connection located on the transmission. Disconnect the connector and try to drive it again. This will help to determine if the problem is located in the transmission or engine related.
Let me know.
Regards,

Mar 29, 2009 | 1993 Chevrolet Camaro

1 Answer

92 camaro rs 3.1 v6


ondemand5.com will give you a diagram of this engine. Check your local auto parts store thats uses the program.

Jul 08, 2008 | 1992 Chevrolet Camaro

1 Answer

Car 'slips' out of gear


try changing the fluid checking all wiring are you getting any jerking or poping noises? batt levels ok? things of that nature also try reseting the computer, (un hook batt. for a few mins) take it down and see if there are any error codes

Jun 13, 2008 | 1993 Buick LeSabre

Not finding what you are looking for?
1992 Chevrolet Camaro Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...