Question about 2000 Mitsubishi Diamante

1 Answer

2000 mitsubishi Diamante,one week after a new axle was installed,the first thing to happen was...When the car was started and after warm-up,once put into Drive,gear indicator light on the dashboard would flash(like a sequential turn signal)fron neutral to drive,and the vehicle would barely move.After disconnecting the battery to Reset the computer.the car went into gear and ran normally..This morning i started the car,Pushed the button down on the gearshift knob,and the vehicle will not even come out of Park,Is this an electrical problem,or Mechanical.Please help!!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,341 Answers

By the sound of your problem your vehicle has an electronic automatic gear box but correct me if I am wrong..Now this can be caused due to a faulty electronic part but I cannot guarantee this.It may need a diagnostic tool hook up to the car to read the error code.(if it's giving a check engine light )

Posted on Nov 12, 2009

  • Slick CKoleman
    Slick CKoleman Mar 13, 2015

    Mine is doing the same wat is the problem

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to find the location for my crankshaft position sensor on my 1999 Mitsubishi Diamante


Your 1999 Mitsubishi Diamante is a 3.5L MFI SOHC 6cyl engine.
MFI = multi-port fuel injection
SOHC = single overhead camshaft
This answer covers Mitsubishi Diamante1.8L, 2.4L, 3.0L (SOHC and DOHC), 3.5L, and 1997-2000 1.5L Engines.

2.4L engine shown, others similar.

Fig.1 - CKP position and its two mounting bolts
am-trying-find-location-crankshaft-vkz3iz4htmqkl2kxsk34hqrj-3-0.jpg

In Fig. 1, the two arrows point to the CKP (crankshaft position sensor) mounting bolts to remove. 2.4L engine shown.

Fig.2 - CKP reluctor removal
am-trying-find-location-crankshaft-vkz3iz4htmqkl2kxsk34hqrj-3-2.jpg
Remove the sensor and slide the reluctor wheel off of the crankshaft-2.4L engine shown.

1. Disconnect the negative battery cable.
2. Remove the timing belt.
3. Unplug the sensor connector.
4. Unfasten the two retaining bolts, then remove the CKP sensor from the vehicle.
5. Installation is the reverse of the removal procedure.

Reference: Autozone online repair guide: Mitsubishi Galant/Mirage/Diamante 1990-2000, at
www.autozone.com

Fig.3 - photo - new 99Diamante CKP, a Wells part #SU4313
am-trying-find-location-crankshaft-vkz3iz4htmqkl2kxsk34hqrj-3-5.jpg

Jul 31, 2016 | 1999 Mitsubishi Diamante

1 Answer

2000 diamante - intermittent problem= won't start occaisonally.when tried to start, got all power fine, but didn't crank- just got a hum. towed it, put car down & it started.when it does start, it's a...


I would check to see if its possibly a bad relay or maybe your starter is intermittently getting jammed.Hope this helps to try to find a solution.

Feb 07, 2011 | 2000 Mitsubishi Diamante

1 Answer

Need fuse box diagram for 2002 mitsubishi diamante


automatic proton satria fuse to turn the engine over turns it over once then cuts outthen dont work after that,but if i take out the fuse then put it back in the same thing happens

Nov 05, 2010 | 2002 Mitsubishi Diamante

2 Answers

2000 mitsubishi diamante has spark has fuel up to the injectors and power but wont start.


At injector's, need to check if you have ground pulsation, to check, connect test light on pos (+) battery terminal, now your set to check ground, at injector harness, probe wire's, while some one cranks engine, look for pulsation, if you don't have pulsation, it will need a computer, injector pulsation is control by the computer, if no pulsation, then no fuel can get into cylinder.

Sep 09, 2010 | 2000 Mitsubishi Diamante

2 Answers

Will turn over but not start


1 see if you are getting spark 2 if not ecm is bad, or cap,or distributor 3 if yes timming is off hope this helps

Apr 14, 2010 | 2000 Mitsubishi Diamante

1 Answer

I'm having issues putting the axle back int he transmission on my 2004 mitsubishi diamante LS


My expertise is with Mits Galants but most of that carries over to the Diamante. The front half shaft axles on the mits galant has a circle clip on the end that slides ionto the trans. I assume the Diamante have the same circle clip. Thes are suppose to be replaced each time you pull the axle but usually you don't have to unless they are bent or out of round. These circle clips are suppose to compress when you shove the axle in and then expand once the axle is in. Look at your axles and if the clips are messed up replace them (the clips not the axle). Ideally the axle just slides in with a good solid shove as long as you have the splines on the axle end aligned. There should be a minor catch from the circle clip as it is being compressed.

Feb 28, 2010 | 2004 Mitsubishi Diamante

2 Answers

I took off the distributor on my 2000 diamante ls and im pretty sure its installed corecctly andall the connectors are connected and all it does id crank


2000 mitsubishi diamante will turn over but will not start and now has no compression? how do u put in the compression so that the car will start.

Jan 13, 2010 | 2000 Mitsubishi Diamante

1 Answer

Car Shaking


different things are happening here. get wheels balanced, and motor checked.

Apr 24, 2009 | 1992 Mitsubishi Diamante

Not finding what you are looking for?
2000 Mitsubishi Diamante Logo

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...