Question about 1998 Ford Mustang

1 Answer

My car door bell has fallen inside the hole that supports it and now my door bell wont stop ringing. What can I do to stop it from ringing?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 720 Answers

Hi,

If you're referring to the Courtesy door switch (interior light turns on when you open your door), then quickest solution would be to locate the interior light fuse (inside fusebox) and remove it (key off).

However, it is possible that other devices like Keyless entry, Radio etc, may also run off the same fuse. If this is the case, then the safest bet would be to have someone remove the inside door panel (the one which the switch has fallen through) and disconnect the courtesy switch connector, until you have had the switch repaired.

Cheers,

Posted on Nov 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is key dance so dummy bell will signal if i leave lights on


Another american invention bells and bleepers that drive me insane when repairing cars and the door is open dong dong dong ,fixing the lights ring ring ring ,key in ignition bong bong bong .look in the fuse /relay box inside the car and thier you should find the annoying little speaker thingy pluged into here and it normally looks like a relay with speaker holes on the side .

May 30, 2014 | 1999 Ford Windstar

1 Answer

Door bell rings when key is out and drivers side door is opened on my 2005 chevy impala


Assuming the warning is for the key in the ignition, the problem could be the sensor inside the steering lock cylinder.

Jan 28, 2013 | 2005 Chevrolet Impala

1 Answer

What's your problem?bell doesn't ring when keys are left in ignition


the chime is burned out or the door jamb switch not sending a signal to the module wire break inside the boot that cover the wires between the door and body

Apr 05, 2012 | Cars & Trucks

3 Answers

Door bell wont stop ringing


answer the door.. lol..pull plug on the door bell....unscrew the ringer and remove the wiring from the door bell...the door bell switch is stuck.

Feb 11, 2011 | Dodge Caravan Cars & Trucks

2 Answers

While driving a bell ringing happens when i make a right turn. sometimes the bell rings continually while i'm driving. what the problem?


Sounds silly but this is how i fixed my bell ringing. !st the ringing is the alarm when you open the door and the key is in the ignition or the car is running. I found the push switches that are on the side of the car and are operated when the door is shut have become loose. All you need to do is tighten them up a bit and the bell ringing will stop. When you make your right turn you probably push a bit on the door and that helps open the switch more. The switches are the contact switches that turn on the light as well as the warning sensors for open door. See if your dome lights flicker a bit as well.

Mar 05, 2010 | Hyundai Motor 2004 Sonata

2 Answers

The ignition bell wont stop ringing


You need to unplug the door harness one at a time to locate which door is causing the problem. Once the door is located, you can replace the switch which is located on the lock mechanism.

Sep 29, 2009 | 1994 Ford Ranger Supercab

1 Answer

Door adjar bell keeps ringing even while driving!


TRY LUBRICATING DOOR SWITCH SOUNDS LIKE IT IS TICKING OR DEFECTIVE

Apr 12, 2009 | 1996 Volvo 850

1 Answer

Ignition bell will not stop ringing


It was the seatbelt chime - our solution remove the module.

Thanks anyways

Jan 25, 2009 | 1995 Volvo 940

1 Answer

Seat Belt Bell


There is a pin on the inside of the door - we built up 2 or 4 layers of duck tape on the swinging door to hold closer to the pin - that stop the turn ringing but it will ring if you leave the keys in the car by accident still - Marsha

Jan 21, 2009 | 2005 Hyundai Sonata

2 Answers

Car door bell won't stop ringing.


is there any type of check engine light on or any type of warning light is the sound of the bell the same bell sound when you open your door or seatbelt warning

Aug 28, 2008 | 1997 Plymouth Neon

Not finding what you are looking for?
1998 Ford Mustang Logo

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...