Question about 2000 Ford Expedition

1 Answer

HOW DO U GO ABOUT PUTTING IN A HEATER CORE. NEED

HOW DO U GO ABOUT PUTTING IN A HEATER CORE. NEED TO KNOW STEP BY STEP... 2000 FORD EXP

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 426 Answers

1. drain coolant
2.remove instrument panel
3. for 5.4 (4v) if equiped,remove junction splash shield
4.for 5.4 (4v) if equiped, disconnect starter relay cableHOW DO U GO ABOUT PUTTING IN A HEATER CORE.  NEED - 9ad8eea.gif

  1. For 5.4L (4V), if quipped, remove junction block bracket.
  2. Clamp inlet and outlet heater hoses.
  3. Disconnect heater hose from heater core by gently pressing it toward heater core.
  4. Remove A/C plenum demister adapter.
  5. Disconnect vacuum line.
  6. Remove 13 plenum chamber top screws.
  7. Remove blend door assembly from case.
  8. Remove heater core.
To Install:
NOTE: If needed, clean and lubricate coolant hoses with plain water.

0f0dfb5.gif
  1. Install heater core.
  2. Install blend door assembly to case.
  3. Install 13 plenum chamber top screws.
  4. Connect vacuum line.
  5. Install A/C plenum demister adapter.
  6. Connect heater hose to heater core.
  7. Release all clamps from inlet and outlet heater hoses.
  8. For 5.4L (4V), if quipped, install junction block bracket.
  9. For 5.4L (4V), if quipped, connect starter relay cable.
  10. For 5.4L (4V), if quipped, install junction splash shield.
  11. Install instrument panel.
  12. Refill engine coolant.
I hope this helps you

Posted on Nov 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 ford explorer heat dosnt work


pull back the carpet on the passenger side and check for moisture, if it is wet your heatercore is bad. if no moisture and both hoses going to your heater core are hot it is possible the cable operated door is failing to open. this link should help in both cases http://www.autozone.com/autozone/repairguides/Lincoln-Aviator-Ford-Explorer-Exp-Sport-Exp-Sport-Trac-Mercury-Mountaineer-2000-2005/Heater-Core/Removal-Installation/_/P-0996b43f802e40b6

Nov 06, 2012 | 2005 Ford Explorer

2 Answers

Heater core 2000 ford windstar


Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 02, 2010 | 2000 Ford Windstar

1 Answer

2000 windstar is leaking coolant behind motor and smells with ac on...Heater core?


Yes u have a leaking heater core, below fin d the instructions to replace it.
1997-2000 Ford Windstar 3.8
Heater Core
Inspect ' Replace
Drain the cooling system

Heater Housing

The heater housing is usually under the dash and must be removed to gain access to the heater core. Procedures for replacing the heater core vary with the year, make, and model of car. It is therefore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
The heater housing is disassembled to get to the heater core.
Heater Core Remove the access panels(s) or the split heater/air conditioning case to gain access to the heater core. Remove the heater coolant hoses. Remove the cable and/or vacuum control lines (if equipped). Remove the heater core securing brackets and/or clamps. Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing. To reinstall the heater core, reverse the removal steps. When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Oct 25, 2010 | 2000 Ford Windstar

1 Answer

Heater core for a Ford 2000 F-150 5.4 4x4 had been


There is a Haynes Manual available for your vehicle @ most large Auto Parts stores. It covers how to do this. $25.00 for book.

Feb 03, 2010 | 2000 Ford F150 Flareside SuperCab

1 Answer

Need to know how to install a heater core. i have


go to autozone.com you can look it up but you will be better off to get a repare manual on it, it will save you money latter on. bobg22

Nov 12, 2009 | 2000 Ford Expedition

2 Answers

Misfire on 2000 Ford Exp 5.4l triton engine


what is the missfire code, has the recall been done for the leaking heater core coolant hose? the leak drips onto the passenger side ignition coil and shorts it out and causes a missfire.

Oct 20, 2009 | 2000 Ford Expedition

1 Answer

Trying to put a heater core in a 1998 ford ranger and don't know how. Do you have a diagram to go by. step by step. thank you.


Disconnect heater hoses. Remove glove box. Remove cover fro heater core (8mm screws) . Remove parts in way of cover. Replace heater core. reassemble. I would recommend flushing system first. Top off coolant.

Oct 04, 2009 | 1998 Ford Ranger SuperCab

1 Answer

No back heat in Expedition, Blows cold air but front works fine


Shelly,

Buy used parts at car-part.com. Look on page with * to find the cheapest part. Coud be your temp blend door (#2) may not be moving back and forth. Or, you are not getting hot water to the rear heater core.

3d53924.gif
You may have to crawl under the truck and feel the heater hoses to see if they are hot. You will find a group of 4 lines, 2 for heater and 2 for a/c. If hot, you know hot water is getting back to the heater core. If not, there may be a hot water vave that's not working. Not sure if EXP. has a water valve for rear.

Let us know what you you find. Good luck.

Feb 22, 2009 | 2000 Ford Expedition

1 Answer

Heater core for ford 2001 exp.


you must remove the dashboard, instrument cluster, passenger airbag, etc. remove the heater and ac evaporator cover, http://www.f150online.com/forums/showthread.php?t=215665 this will help

Dec 04, 2008 | 2001 Ford Expedition

1 Answer

Water Retention


I am sure the pressure test will show the location of the leaks, also no explorer does not have a rear heater core.

Nov 21, 2008 | 1998 Ford Explorer

Not finding what you are looking for?
2000 Ford Expedition Logo

2,039 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...