Question about 2001 Dodge Ram 1500 Truck 2WD

1 Answer

My Ram is missing the tire jack & tools. What is the proper name for these items. I can't find it online

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Roadside emergency kit, Jack, Tire tools, Lug wrench.

Posted on Nov 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I found the lug wrench and jack. Where is the nut to lower the spare and where is the 4-sided adapter stored?


How To Lower Your Spare Tire - YouTube

? 1:27
https://www.youtube.com/watch?v=6rLi0I7vRIw
Mar 30, 2011 - Uploaded by Garden City Jeep Chrysler Dodge Ram SRT
The staff at Garden City Jeep Chrysler Dodge are ready to help you. ... Garden City Jeep Chrysler Dodge has The Can-Do Crew show you how to lower your spare tire. ... Pacifica, Durango, Charger and Liberty for the Hempstead, Queens, Brooklyn ...Installation of a Trailer Hitch on a 2006 Chrysler Pacifica ...Missing: nut ‎sided ‎adapter ‎stored

Fix a Flat Tire: Chrysler Pacifica - CarCareKiosk

www.carcarekiosk.com/...Chrysler_Pacifica...3.../change_a_flat_tire
Free video on how to fix a flat tire in a 2005 Chrysler Pacifica Touring 3.5L V6. Complete instructions for using the jack kit and spare tire in a 2005 Chrysler Pacifica... Most Chrysler jack kits include the jack, a jack handle and a lug nut wrench.

Jan 05, 2016 | 2006 Chrysler Pacifica

Tip

Removing a flat tire on the road safe and easy


Greetings folks,
I have many years experience in the automotive industry and have just about been through every type of situation there is to have experienced.
One simple thing that strikes me as strange is the fact that it is very hard to find proper training for vehicle owners and drivers on the facts about how to change a flat tire, or how to be prepared for a flat tire without even taking the tire off your car or SUV.
How about the trouble you may have had in the past, you knowing exactly how to change a flat but couldn't get the lug nuts off the wheel studs due to someone once before inspecting the brakes or replacing the tires and using an impact gun to install the lug nuts and over tightening them.
Has anyone ever illustrated to you folks the do'e and dont's of using a jack to raise your vehicle off the ground to gain access for removal of a wheel?
Ok lets start with the needed required tools one should carry in their car to prepare for such an event, first lets have a small first aid safety kit for any cuts and bruises including bandades and infection preventing creams and liquids(Iodine, hydrogen peroxide, etc.), next we need to be sure we have a good spare tire in the trunk, easy to check push the side to see if it is hard to the touch indicating it has proper air inflation, also check for a good working tire jack the typical scissor jack and crank handle, which comes with the vehicle make sure it is good, but I prefer to purchase a $29.99 miniature sized professional looking hydraulic floor jack, they fit under the car excellently and work tremendously easy and safe, they can be purchased in Sears Auto or any Auto Parts Store, also a pair of jack stands, two small wedges of wood shaped like large door stops(we will refer to them as the wedges), they can be bought or easily trimmed by a wood worker, from a 4"x4" wood post 6" long and cut on a 45 degree angle on one side, a 1/2" drive breaker bar(heavy duty from Sears Auto Tools Dept) or the like, if not a set of 1/2" impact sockets then at least two common tire wheel lug sizes which are 3/4" and 13/16", these type sockets are made tough and can take a work out, a 48 oz. short handled heavy duty hammer, very important at least two cans of fix a flatNow that you have been introduced to an arrangement of neccessary tools and safety equipment to take along with you on a typical road trip in hopes to keep you and your vehicle from paying dissasterous road service fees and tremendous time lose on the road due to a flat tire, lets get started;Ok now if you experience a flat and notice (once you pull safely all the way over off to the shoulder of the road with your hazard flashers on) that the tire is losing air but doesn't really look in real bad shape, such as a condition tire folks call"run flat" which means the tire has been driving and supporting the vehicles weight with no air in it for a sustained distance, and the tire very noticably has damage all over its sides, etc., this is a typical flat tire that needs to come off, however if the tire appears rather good except for the fact it has or is losing air, get your fix a flat and safety googles out of the trunk with your light duty gloves, find the little black or chrome tire air valve located on the tire near the metal wheels edge, unscrew the little cap, read the directions on the fix a flat can, and install the contents according to the directions.In all cases of this being used they require you to put the screw cap back on the valve and cautiously take your car back onto the road, stay in the right lane with your warniog hazard flashers on and allow the foamy liquid to perform its chemical majic as you drive at the recommended speed on the directions.This should fix your flat without any fuss or muss, have the tire looked at at your next convience to be sure it is ok to drive on it any further.That was relatively easy and thank godness for Fix A Flat, the next type of flat tire however requires a bit more thought and work.I am going to cover first the proper way to jack up your vehicle in the event the tire has to come off for the spare to be installed.

First, spull to safety, put your hazard flashers on whether its day or night, look for an area that the ground looks pretty level.

Secondly, open your trunk and leave it open, remove your spare tire and all the neccessary tools you will need to change the tire.

Third, using your breaker bar and the proper impact socket attempt to loosen(but dont remove) the tire nuts on the flat tire, if a tire lug wont come loose, getb the 48 oz. hammer and the impact socket that fits the wheel lug and hit it with a sharp firm blow, be certain you have on the eye protection as hitting steel against steel can cause some steel fragments to fly you don't want your eye to be the reciever of such, after you hit it the nut should turn loose, remeber you are only turning them about 1/2 turn loose you don't remove them until the tire is jacked up and off the ground(doing this helps prevent the car from falling off the jack had you jacked it first then applied all sorts of tugging etc on the tight lug nuts).

Fourth, place the wedges in front of and behind one of the tires on the opposite side of the car, this will eliminate the possibility of the car sliding forward or backwards off the jack once it is jacked up.
Find a secure flat firm welded frame area to place the floor jack under, or if using the original scissor jack be sure you are also using it in a firm jacking location(most scissor jacks have a notch put in the under side of the vehicle that allows the jack to fit into the channel securely) once found and level jack the car's tire off the ground, install the jack stands under the vehicle in a firm body frame sort of area to prevent the car from falling off the jack you can never be too safe.

Fifth, install the spare tire on the vehicle and while it is on the jack, start threading the wheel lug nuts onto the appropriate wheel studs, use your wrench and socket to get the nuts down only slightly tight.

Sixth, remove the jack stand or stands depending on how secure you felt about using one or two, lower the jack, once the tire is firmly touching the ground, continue to tighten the remaining wheel lug nuts one at a time until they feel good and firmly tight.

Seventh, remove the wedges from the wedged tire on the other side of the vehicle, remove the jack, put everything back into the trunk including the flat tire. Happy Motoring!!!

on Jun 08, 2010 | Chevrolet Camaro Cars & Trucks

3 Answers

I have a 2002 dodgr ram 1500 2 wheel dr,how can I tell if my front wheel bearing is going bad?


Is it a one piece wheel hub bearing?

If it has 120,000 on it-- change both sides

The bearing & race type, you take apart & wash
off & look at for wear & markings & replace or
grease & return to service

If you hear a noise from 25 to 40 mph
On a rear drive car, you can remove the
brake rotor & feel the worn bearing --sometimes

You may be able to do that

I would just put the bearings on your Preventative
Maintenance list for 100,000 plus & change them
when you get there

Your Oxygen Sensors go at 100,000

Spark Plugs every 3 years & so on

I don't wait on failure,only as a learning tool,
then those items get added to my list

Sep 28, 2014 | Cars & Trucks

1 Answer

How do i get my spare tire down? special tool? where?


Hello! Here is procedure to remove spare tire...Guru...saailer



  1. Park on a level surface and put on the emergency brake. If the car is near the side of a road, switch on the hazard lights.
  2. Locate the tire repair kit. It consists of a jack, a jack rod and a wheel nut wrench. In the regular cab, pull the entire seat bench forward. The tools are located behind the drivers seat. The King cab model has a tool case located directly behind the driver's seat. The Crew cab stows the tools behind the back bench. Pull the bench forward and remove the tools.
  3. Insert the square end of the jack rod into the square hole in the nut wrench. This gives the jack rod a handle.
  4. Find an oval shaped hole in the back of the truck under the middle of the tailgate. Look through the hole and find the winch for the spare tire. It is a circle with two notches.
  5. Insert the T-shaped end of the jack rod into the hole. Slip the T-shape into the double notched circle of the winch.
  6. Turn the jack rod counterclockwise to lower the spare tire to the ground.
  7. When the tire is completely lowered to the ground, remove the center retainer chain and pull the tire out from under the truck.
  8. Wind the jack rod clockwise to completely retract the retainer chain

Dec 18, 2010 | 2001 Nissan Frontier Crew Cab

2 Answers

Vibration on driver side I put new tires on an still vibrates at 50 mph an up


sounds like your balancing is off, have balance checked my tire dealer, or there is a bubble in the new tire, that something happens ever to new tires.

Jun 14, 2010 | 2006 Dodge Ram

2 Answers

Where is the jack and tools for spare tire?


CHANGING A FLAT TIRE
Jack Location
In the Durango, the scissor jack and tire changing tools
are stowed under the second row seat.
The jack is secured in place with a winged stud and a
fixed stud. It is very important to secure the jack tightly
in place by engaging the slot in the base to the fixed stud
under the middle seat. The winged stud inserts through
the eyelet in the end of the jack’s worm screw.

Dec 09, 2009 | 2001 Dodge Durango

1 Answer

Cant release spare tire from under car of 2002 mercury villager. no owners manual available.


Location of the spare tire and tools
The spare tire and tools for your vehicle are stowed in the following
locations:
Item Location
Spare tire Under the vehicle, just forward of
the rear bumper
Jack assembly Under the third row bench seat in
the tool bag
Removing the jack and tools
1. Lift the 3rd row seat cushion.
2. Remove the jack assembly from the bag under the seat.

Removing the spare tire
1. Open the liftgate, locate the U-shaped slits in the carpet, and flip up
the piece of carpet to expose the hex nut.
2. Insert the lug nut wrench on the
hex nut in cargo floor.
3. Turn the wrench
counterclockwise until tire is
lowered to the ground and the cable
is slightly slack.
4. Remove the retainer from the
spare tire. It may be necessary to
lift one end of the tire to disengage
the retainer

Jul 12, 2009 | 2002 Mercury Villager

1 Answer

1997 dodge ram truck missing jack handle & extension for spare


any salvage yard or if you write me a mesg with your adress i will sell you the one i have wich came out of a 97 Ram

Jun 16, 2009 | 1997 Dodge Ram 1500 Club Cab

1 Answer

Were the jack iron and how do i lower my tire if there's a flat


There should be a hole in the rear bumper, somewhere near the license plate . The end of the jack handle ( you might want to use a flashlight to see exactly what needs attaching to ) Once you install the proper tool into it, turn to the LEFT TO LOWER the tire down. Reinstall the tire works the the same except you turn to the RIGHT TO RAISE. Hope this helps

May 09, 2009 | Chevrolet Tahoe Cars & Trucks

2 Answers

2003 GMC Sierra 1500 missing spare tire removal tools


try junk yards .com
or if you no anyone with a garage you can make one
or just cut the cable and put the spare in the bed

Feb 21, 2009 | 2003 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

607 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...