Question about 2003 Hyundai Tiburon

2 Answers

SNSR Fuse allways short when i put the key at On...or try to start the engine... 2.0l Standard

Posted by on

  • maximml Nov 12, 2009

    Thanks,
    I will go on garage to find what is the code...
    but how i can do manually?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi i have 1998 hyundai accent with 185kms- which won't start, it became unpredictable...
sometimes it starts sometimes it won't. i have to wait for sometime like 20 mins or so and then it will start on it's own ...like there are no concerns,,,,i took it the dealer and they said it could be cranftshaft position sensor , but they don't know really ....seems from there views and mixed reactions . ...they want to start by replacing the crankshaft sensor and then dealer want to replace the fuel pumps and so on..it's going to be really costly for me....and good for them ....cuz initally for replacing crankshaft sensor will be $250(including labour and what not) ...if not solved then fuel pumps ...i brought the care back for now ...it's running but no piece of mind...don't know when it will stop ....never had such a issues with this car.....its being a really good car.....every service as per manufacture were done on time .......any help will be great....thanks

Posted on Nov 25, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 720 Answers

Hi there,

You don't actually mention whether your engine STARTS?

The SNSR fuse covers the following components:

- Oxygen (HO2) Sensor
- Camshaft position sensor
- Crankshaft position sensor
- Idle Speed Con Actuator

So, there is obviously a problem in one (or more) of these circuits.

Due to the new type OBII Diagnostics on the Tiburon, you will need to take the vehicle to your nearest Hyundai Service dealer and have your CODES scanned from your vehicle's computer. This will determine where the actual fault/s are.

However, if you're technically inclined, I can show you one possible way to 'manually' extract the diagnostic codes from your vehicle's computer, by accessing the Data Connector under the dashboard (above either driver or passenger knee).

The data connector looks something like this:

SNSR Fuse allways short when i put the key at - ddd6725.gif

Let me know if you'd like to try and solve yourself, and I'll provide you with further instructions.

Cheers,

Scott

Posted on Nov 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How many 02 sensors does a 2007 Chevy Express 1500 4.3 have I only found 2 on the cat


Hello Wilber,

My power distribution schematic shows two 02 sensors.

Under Hood Fuse Block -

02 SNSR A - Fuse 40 15 Amp
02 SNSR B - Fuse 39 15 Amp

There are only two and always located on the exhaust system.

Apr 18, 2017 | Chevrolet Express Cars & Trucks

3 Answers

90 lesabre limited Fuel pump fuse blows every time I start the car It's a 20a fuse, I'm not even sure if it's a final pump fuse I can't find any diagrams showing what is what. Right side of dash


20 AMP is a big fuse, I would say its the fuse to the motor check this web site http://www.beijing-fanyi.com/1990/1990-buick-lesabre-wiring-diagrams

Apr 04, 2017 | Cars & Trucks

1 Answer

CLT TEMP SNSR MITSUBISHI WARRIOR


Jump start? Battery needs to be replaced.

Jan 04, 2014 | Mitsubishi L200 Cars & Trucks

1 Answer

1998 suzuki esteem 1.6 will not start


G16b engine , in USA>
owned 3, know them too well.
that is alternator shorted out , 1 of its 3 phase huge diodes.
60amps, im looking now.
at real esteem book.
sad but there are 4x 60amp fuses there.
an guess what THAT MATTERS BIG TIME
that tells me which branch on tree shorted
here ill do them all
80amp 1 alt shorted
60amp 4 ABS shorted
30amp 5 rad fan shorted
60amp 6 heater short, (HVAC heater blower)
60amp 3 IG , feed 33, feed 15 cab box. with 15amp fuse, (nah)
60amp 2 lamp. (huge )white -blk feed. all have small fues
but. tail light relay? shorted?
off hand if fuse 2,3,or 6 blows,
then the cab box has a huge nasty short to body
or someone was hacking there.


60a-rafhz5f2ue04uln2ew1uxszq-2-0.jpg which one?

Mar 12, 2017 | 1998 Suzuki Esteem

3 Answers

Check engine light came on


What do you mean "can't find code"? If the check engine light is on, there is a fault code stored in your onboard computer - that's the way it works. If you are using a generic OBD code reader, that is most likely the reason you cannot find any codes. You need to use a scanner that has the correct software to access your ENTIRE computer network, not just the "continuous memory" or "generic" side of your computer system.

The window problem is a seperate problem and must be diagnosed accordingly.

Apr 23, 2012 | Daewoo Matiz Cars & Trucks

3 Answers

Hi, I have a problem with my Hyundai tiburon 2003 2.0l standard The Fuse SNSR Allways short when i try to start the car or just when i put the key at on, I try to disconnect the four sensor,the 2...


The fuse is blowing,most likely because of something else in the same circuit,find out what else is not working on the car,what all is not working.Is the car not starting?

Nov 16, 2009 | 2003 Hyundai Tiburon

1 Answer

01 accent gl 1.6 liter auto,air ;engine lite on,trouble code 342, (cmp, sen low) three wire sys. posit 1 tests bat volt. posit 2 is suppose to read 0-5 volts @700-3000 rpm;but reads 12.1 running and 11.3...


P0342 is set when the ECM does NOT receive a signal from the CMP snsr. You may very well have GOOD continuity between the ECM and pin 2 (000.2 ohms), but that wire, if grounded someplace (shorted to ground or to another wire in the harness), the ECM will not/does not get a clear/proper signal. Look for a problem in the wiring harness.

Sep 03, 2009 | 2001 Hyundai Accent

1 Answer

2003 Hyundai Sonata starts when cold and dies after warming up.


Wiring problem or the ECU (engine control unit) is defective. Try this, disconnect the battery cables from the battery and short/touch them together for 30 seconds (do not do this if connected to the battery). Then, reconnect the cables to the battery posts & see if that fixes it. If it doesn't, then there is a wiring problem associated with the cam pos snsr or the ECU has gone bad.

Aug 11, 2009 | 1992 Hyundai Sonata

1 Answer

1993 sidekick charging system


is it charging sufficiently? short jorneys do not allways put enough charge back into a battery, is your charge light coming on then going out once the engine is started?

Feb 16, 2009 | 1993 Suzuki Sidekick

Not finding what you are looking for?
2003 Hyundai Tiburon Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...