Question about Toyota Camry

1 Answer

Toyota Camry with low power

I have a 1990 Toyota Camry with 275K miles. It is the 4cyl 3FSE engine. I did a rebuild @220K but did not change out any ignition or fuel components during the rebuild so those parts are still original. The problem is that the car does not have the power it once had and there is sometimes a slight stumble on acceleration in the mid-range. The engine is mechanically sound with good compression, no oil burning, good plugs, cap & rotor with timing to specs. It passes smog and is otherwise in good shape. I am wondering if maybe fuel injectors are tired but am hesitant to just start changing parts.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 161 Answers

I had a Toyota corolla that had a similar problem took off distributor cap found pieces of copper windings from coil replaced complete distributor problem fixed.

Posted on Nov 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ?


Where is the crank position sensor on a 95 Toyota celica gt 2.2

search.aibing.cc/Where+is+the+crank+position+sensor+on+a+95+Toyota...
P1335, No Crankshaft Position Sensor Signal - Engine Running. ... 91 1991 ToyotaCelica GTS Engine Mount Right 2.2L 4 Cyl Genuine. ... 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 . ... Powered by a 2.2-liter engine, the Celica now had ST and GT trim models. ... in 1986 and a 2.0-liter ...

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ...

www.fixya.com/cars/t26080657-crank_position_sensor_1994_toyota
31 mins ago - It is not behind pully nor in dist all videos show - Toyota Cars & Trucks question. ... Change a crankshaft position sensor on a 2000 eclipse.

toyota camry crankshaft sensor - ABMforum.com

abmforum.com/toyota-camry-crankshaft-sensor.html
toyota camry crankshaft sensor 99 camry crankshaftcamshaft position codes i got a problem with my 97 ... The car 96 toyota camry 2.2 liter 4 cyl. ... 1994 toyota camry 2.2L 257k miles Symptoms Car overheats Top radiator hose hot bottom cold ...

Toyota Camry 5SFE Engine Timing Belt, Water Pump and ...

hubpages.com > Autos > Do It Yourself Auto Repair
Jul 10, 2014 - The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double ..... Remove the lower timing belt cover with the crankshaft position sensor. ..... I've never, ever replaced the harmonic balancer on a 4cyl 5SFE.

1995 Toyota Camry LE 4 cylinder - YouTube

? 2:27
https://www.youtube.com/watch?v=7TW6hlUiHWQ
Sep 6, 2011 - Uploaded by jacasan2000

Feb 03, 2016 | Toyota Cars & Trucks

2 Answers

Low end knocking noise; 220K miles;


sounds like a bad rod bearing. if auto trans put in drive hold brake firmly with left foot gently push on gas pedal with right foot if knocking increases with engine rpms bad rod bearing time for engine rebuild

Dec 27, 2013 | 2002 Nissan Xterra

1 Answer

I have a 2000 Toyota Camry with 220k miles. The car runs very well most of the time but the check engine light came on yesterday. The car has developed a periodic strong shuttering, sometimes when i'm...


Yup, any time you give it throttle after it goes into overdrive it will shutter like that, and have a miss at idle. This is called a dead cylinder and happens to a LOT of vehicles nowadays. Meaning it's a common situation. Have each injector checked with an ohm-meter. The one that reads low is faulty. If none read low and all are the same, you have a bad exhaust valve and it's needing attention. Have a compression test done with all the spark plugs out to find which has very low compression. That would be the "dead Cylinder".

Jul 10, 2017 | 2000 Toyota Camry

1 Answer

How do i fix a thrown rod in my 1999 camry


my solution would be to replace the engine in order to avoid headaches.if the rod came out through the side of the block,then replacing the engine block would be your best option and alot cheaper than rebuilding.try to find an engine with low miles and just drop it in to save time and money.hope this info helps.take care and good luck, manny

Mar 31, 2010 | 1994 Toyota Camry

1 Answer

1994 camry will stall while driving normal speeds. Check engine light and airbag light comes on. Vehicle will start immediately but lacks power and misfires. After cool off vehicle will perform properly...


4cyl or V6?? Have your ignition coil checked and you vehicle scanned for the check engine light. If this is a 4cyl the coil is inside the distributor cap (possible oil leaking into the cap, very common on 4cyl camrys). If its a V6, have the Crank and cam sensors inspected. Hopefully this helps!!

Mar 16, 2010 | 1994 Toyota Camry

1 Answer

I'll have to be more specific. 2010 toyota camry oil filter


Go to Google and enter "youtube toyota camry oil change." This is a fairly good video on how to address the oil change procedure that should be similar to your (and my) 2010 Camry LE, 2.5L; not exact, but you'll get the idea. Also, Google "Avalon oil change pdf" and click on the '05/'06 Avalon item to get a printable version that should also give help/hints for your 2010 2.5L. Now all we have to do is get permission from Toyota to waive the requirement for "only" 0W20 synthetic ($$$) in favor of either less expensive and more readily available 5W20 or 0W30 and extend the change interval from a very low 5000 miles to something more reasonable like 7500 miles or, better still, 10K! I've written to them to see what kind of answer they'll give, but am not hopeful of relief on that front. By the way, Lisle says their filter removal tool Pt. No. 54930 is the correct one and should be available from O'Reilly's Auto Parts; if not on shelf, should be orderable. Good Luck.

Oct 30, 2009 | Toyota Camry Cars & Trucks

1 Answer

I own a toyota camry LE 4cyl with 102k miles and


the recommened oil is any major brand 10W-30W

Jun 12, 2009 | 1988 Toyota Camry

1 Answer

Location for pcv valve on 2002 Toyota Camry 4cyl


Daeler Mechanic told me there is no PCV valve on my particular model.

Apr 08, 2009 | 2002 Toyota Camry

2 Answers

Engine check light on


My '06 Corolla's CHECK ENGINE light came on the other day and then went out after about a half hour. It was back on this morning and stayed on, and I noticed that the automatic transmission was shifting a bit more roughly than it ever had before. Took the car to a Toyota dealership immediately. The guy told me that Toyota has had an ongoing problem with the CHECK ENGINE light coming on due to a faulty CPU (car's computer "brain"). This has been affecting models from '05, '06, and '07 according to him. He said Toyota had extended the warranty for this particular part (i.e. the CPU) due to it being faulty. The warranty expires once you reach 80,000 miles, and my car has 87,000 miles on it (yes, I do drive that much for my job!). But the guy at the dealership was kind enough to put in a new CPU for free because I have been a good, loyal customer there. The CHECK ENGINE light is now off and it should stay that way.

Jan 02, 2009 | 2006 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...