Question about 2002 Chevrolet Silverado 2500HD

1 Answer

Horn location on chevy 2500 with 6.5 tubro diesl. Horn will not work but I can hear the relay working.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 28 Answers

Not positive but look on the back of the front bumper.

Posted on Nov 12, 2009

Testimonial: "The horn was in the middle of the grill but while looking on the back side of the bumper I saw the wire going to it. Thanks alot."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is horn relay on a 97 Kia Sephia, also need to know location of the horns


Relay sounds like its working, horn is located between grill and radiator. And it sounds like horn is bad

Jun 30, 2015 | 1997 Kia Sephia

2 Answers

Location of horn relay for 1990 Chevy k-2500 5.7l


Can't say for sure don't have that manaul but look inside the glove box for a plastic cover it will say relays .The 1st is the fuel pump 2nd I belive would be the horn 3rd would be the fog lights .They are all the same and can be swooped out for each other to test them .

Apr 21, 2015 | 1990 Chevrolet K2500

2 Answers

Where is horn located on 2003 chevy caviler


Horn(s) are typically located under the hood, behind and near the headlight assembly. It is not uncommon for a horn to stop working over time. It is also not unlikely that horn button in the steering column fails. To verify that the button is working, get the car to a very quiet location. Turn off all radios, blowers, etc. to make the car interior as quiet as possible. When you press the horn button, listen for a "click" noise from under the dashboard. This is the horn relay. If that happens, you know that the button(s) in the steering wheel are ok. If you don't hear the click, then the horn button or the horn relay may be the cause of the horn not working.

Jan 02, 2015 | Cars & Trucks

1 Answer

MY HORN STPPED WORKING AND I REPLACED THE HORN AND IT STILL DOES NOT WORK. ON MY 1998 2500 CHEVY


Three things to check. The fuse, the horn contacts on the steering wheel and the horn relay under the hood.

Nov 17, 2014 | Cars & Trucks

1 Answer

I have a 1995 Chevy S 10 and the horn does not work. I think my problem is under the dash. Are there any switches,relays, or breakers I need to be looking\r\nfor? I have traced from horn to fuse panel and...


The horn relay is in the fuse/relay box under the hood. so the fuse is HOT on both sides? you should hear the horn relay click when pressing on the horn switch. there may be other relays in that fuse box to swap with and see if the horns work, if the relay clicks, its "usually" good, but the contacts may be bad. if the relay clicks, check for power at the horn. DARK GREEN wire, if it has power , then check the black wire, thats the ground. If it has power and ground, but does not work, the horn is bad.

Sep 14, 2011 | 1995 Chevrolet S-10 CA Edition

2 Answers

Horn not working. When depressing the horn button on the steering wheel, only "clicking" sound is heard near the front passenger side. Checked the fuse and turned out to be unbroken. What's next?...


The clicking you hear is the horn relay working.
I would locate the horn and insure the wiring is intact and the horn has a good solid ground.
Then while someone is pressing the horn button measure the voltage at the wire that attaches to the horn to ground. If you get 12v or more the horn is bad. If you don't get any voltage replace the relay

Jan 23, 2011 | 1995 Jeep Grand Cherokee

1 Answer

I have 2003 Chevy HD 2500 and the horn doesn't work. The fuses are good and I replaced the horn itself....any thoughts?


did you check the horn relay it is a small box usually in or near the fuses or near the horn itself It may have been just the relay all along and not the horn

Dec 21, 2009 | 2001 Chevrolet Silverado 2500HD

2 Answers

1996 Saturn SL. Horn doesnt work. Fuse is ok. Can't find horn under hood.


it is behind bumper drivers side. I believe there is a relay in the horn, making the horn unique and origional replacement required. if it has three wires in it then it has built in relay.

Oct 06, 2009 | 1996 Saturn SL

2 Answers

1999 Chevy Cavalier Horn Relay Location


The relay is located under the glove compartment. Little difficult to get to but if you peek your head just underneath, you'll see it. Easy to take out and replace. Ive replaced mine and still have a problem. I hear a clicking noise and even can feel the contact when horn is pressed. I changed the horn about 1yr ago and now am wondering if the horn could have gone out so soon.

Jun 17, 2009 | 1999 Chevrolet Cavalier

1 Answer

1986 Chevy Caprice Classic Horn not working


Diagram should be on the inside of the fuse box or relay cluster lid/cover. If Test light has 1 wire and a sharp tip? Yes, but only if you push the horn button too ;-)

My guess is that the horn lost its ground, but you can check this with the light. The horn only beeps when both GROUND and Pos 12v are present. The horn button gives the relay 12v to close, and the relay gives the horn 12v to operate. The ground is always connected.

Connect tester clipwire to 12v source (battery, headlight (has to be on) and touch its tip to metal of car. Does it light? Good. the tester is working and the 12v is a good source.

Touch one of the 2 horn connection or wires (poke it thru the plastic - why tip is sharp). Does it light? Touch the other, does it?

If both light, (1 will be brighter) we can assume the horn coil is good and it is getting a good ground and I was wrong (it happens... but not often). The side that is BRIGHTER is the ground wire side.

Now have someone mash the horn button. Do you hear a tiny click? That is the horn relay. If not, look for the horn relay fuse and replace it. If you DID hear the click, the relay coil is good and is trying to switch 12v to drive the horn.

Now is time to locate and replace the horn fuse or the relay may have bad contacts. Look at the other relay part numbers in the cluster and see if there is a match for the horn one. Swap it out and try the horn.

Hope this all helps. To 'test' the horn, touch the dim side again anf listen for a scratching sound. That is the 12v going thru the tiny bulb in the tester (a resistance) and trying to drive the horn.

Good Luck!

Mar 27, 2009 | 1986 Chevrolet Caprice

Not finding what you are looking for?
Cars & Trucks Logo

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...