Question about Jeep Cherokee

1 Answer

2000 cherokee 4.0 auto involved in minor accident. still ran pulled into garage and pulled fender and grill off for replacement and now wont start. turns over no start so i replaced crank sensor still wont start. put obd2 on it and shows no codes. gotta be something simple but i need help!!!!

Posted by on

  • dkarnsjr Nov 14, 2009

    no anti-theft/ checked grounds /a friend told me to double check all fuses not hard to overlook a blown one especially when obd2 shows no codes gonna do that tonite let u know thanks

  • Mike Butler
    Mike Butler May 11, 2010

    Any anti-theft switches in parts removed?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 477 Answers

Is it possible that there was a body ground wire that didn't get hooked up , or got bolted to a spot on the new fender that was covered with paint causing no ground ? Just a thought.

Posted on Nov 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is inertia switch on Fiat fiorino 2015 model Car was involved in a minor accident. It cuts fuel supply and wont start


Try the trunk, right side behind matting or panel. Or the right side front outer kick panel.

Apr 09, 2017 | Fiat Cars & Trucks

1 Answer

I was in a minor fender bender/cosmetic damage and now it wont start.


Is It a ford Lincoln or mercury?
they have fuel shut off switches in trunk, which activate after accidents

Feb 04, 2015 | Cars & Trucks

1 Answer

2008 jeep patriot wont start after accident


some of these models have a fuse box on that side under the hood. I'd start there first. After that, have an assistant try to start vehicle while voltmeter is attached to battery terminals. Did voltage drop to 10-11volts during cranking attempt? If so, suspect starter.

Nov 12, 2013 | Jeep Liberty Cars & Trucks

2 Answers

After replacing the front bumper cover and rt h/l, the car cranks but wont start. the car was in a minor accident but ran fine until after we repaired it. we must be overlooking something, a sensor,...


I'm not familiar with JAG but MOST cars have a switch in the front and the back that is called a fuel shutoff switch. I am going to say you may have bumped the switch and it shut off the fuel pump. The switch on most cars is located under the bumper area or around the grill area. Your best bet is to go to the local auto parts store and buy a repair manual for your car and start looking the the electrical schematic section to locate where the Fuel shutoff switch is located.

Sep 07, 2013 | 1998 Jaguar XK8

1 Answer

2003 Cavalier, fuel problem after accident


there is no fuel pump cut off switch on this car, it is possible the fuel pump module was damaged from this accident, u will have to have the fuel pump circuit tested for faults before replacing the pump, don't guess, this is an expensive repair

Mar 09, 2009 | 2003 Chevrolet Cavalier

1 Answer

How do you take old headlight assembley out of a 1999 jeep grand cherokee


tious of the sha Open the hood, and using a 7mm socket remove the long headlamp jackscrew, 2nd from left. Grasp the headlight assembly on the upper inboard and lower outboard corners and wiggle and pull very firmly outward to disengage the 3 ball stud alignment posts from their sockets (be cautious of the sharp edges of the grille and fender areas surrounding the headlamp).
rp edges of the grille and fender areas surrounding the headlamp).

Feb 25, 2009 | 1999 Jeep Grand Cherokee

1 Answer

97 jimmy wont start


If it starts with starting fluid, this means the firing and electrical is fine,however, its not getting fuel. I suggest trying the fuel filter first,but, its probably going to be the fuel pump.

Dec 29, 2008 | 1997 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...