Question about 1996 Audi A4

1 Answer

How and where do you install an expansion valve in a 96 audi A4?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

It's in the high-pressure AC hardline, right where it goes through the secondary firewall (the one that divides the battery compartment from the engine compartment). There's a joint there that can be opened up and the valve is inside. Make absolutely sure you've bled all the refrigerant out first, before you open the line.

Posted on Nov 12, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 114 Answers

SOURCE: will my 98 a4 automatic transmission bolt onto a

Yes but they may be programmed differently and the TCU may not be suited

Posted on Sep 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have an audi 97 a4 6 sylander and i had to change the metal pipe wich transfer water from reservor to termostat housing do i need to bleed the system after fix and soo wher is the bleeding valve thanks...


you dont have to bleed the water it automatically takes out the air when it runs and the thermostat valve opens check the level again after a run of 5 miles or when the temp is in the middle

remember not to check when the engine is hot

Feb 07, 2011 | 1997 Audi A4

1 Answer

Im looking for the low port to add air conditioning fluid to my 96 audi a4 (non quattro)


You need special adapter , available from dealer only.
Low pressure switch has to be taken out and adapter installed insted.
I also heard rumor that you can charge system through high side at 3000 rpm , but never tried it , sience I have an adapter.

Jul 04, 2010 | 1996 Audi A4

1 Answer

96 Audi A6 Front Bumper


No, they are not. THe A4 and the A6 chassis are different, the bumpers have a similar style and look to them, but they are not interchangable.

Jun 16, 2009 | 1996 Audi A6

2 Answers

Repair shop can't find A/C pressure connections Audi 96 A4


The 1996 Audi A4 only has a High side refrigerant port. Right where you found it. Right side of radiator.
(Not to insult your intelligence. The passenger side of the car is the right side)

Look for the refrigerant lines going to the exchanger.
With this single port, you must evacuate the entire system, and replace the refrigerant with the proper amount.
(Obviously you can't refrigerant from cans, to the high side)

Your competent auto shop will have an evacuator, and charts to show the proper amount of refrigerant.

May 15, 2009 | 1996 Audi A4

2 Answers

Cambelt sliped or broken. does the valves bend.


what is the liter size of your engine? the 1.8L is an interference engine. generally all Audi engines are interference engines, and timing belt breakage can bend valves, the sure way to determine without detailed maintenance information, install a new belt, once the belt is on immediately run a compression test, if timing marks are good and compression fails, valves are bent.

Apr 07, 2009 | 2002 Audi A4

1 Answer

1996 audi a4 transmission hard shifting


Get the transmission scanned at the dealership. If it has incorrect gear ratio code stored, it needs a transmission. Only the torque convertor or valve body can be replaced for any repairs at the dealership, so it needs to be diagnosed correctly. Any authorized ZF transmission repair shop can also repair them, more than the Audi dealerships can, so thats another alternative.

Mar 31, 2009 | 2002 Audi A4

3 Answers

96 audi a4 blowing cold air


yes, very possible. but first check your fluid level, thermostat.

Dec 06, 2008 | 1997 Audi A4

1 Answer

State Emissions Test


Sounds like a failure of the engine coolant temperature sensor, which is a known weakness on the B5 chassis Audi A4 (model years 96-01). The sensor is relatively inexpensive ($20-30) and if you call up ECS Tuning (www.ecstuning.com) or Pure Motorsports (www.purems.com) with your VIN number, they can send you the correct sensor (there are three types, identified by color of the connector - black, blue, or green). Changing it is somewhat of a pain due to its location, but it can be done in 30-40 minutes. You have the 12 valve 2.8 V6 - take a look at www.audidiy.com and www.12v.org (two dedicated Audi sites) - there are a ton of tech procedures on those sites, and you'll likely find what you need there - a detailed, step by step, photo-referenced procedure on how to change the sensor.

Sep 05, 2008 | 1996 Audi A4

Not finding what you are looking for?
1996 Audi A4 Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14378 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...