Question about 1998 Chrysler Sebring

1 Answer

Fog lights not working how do you troubleshoot this problem?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Test the switch with a test light. Disconnect the wire to fog light and put test light on it and see if it lights up.
Also test the hot positive wire going to switch. If it doesn't lite here, then the fuse may be bad or wire to the power source is broke or disconnected.
Do the same for the switch.
You can test power to the lights themselves with a test light or voltmeter.

Posted on Nov 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Fog lights wont work


Ryan, Does the fog light indicator on dash light up when you pull out the fog lamp switch? Also, Are you aware the fog lights won't work when high beam is on?

Mar 05, 2014 | 1999 Dodge Stratus

1 Answer

How do you switch on the rear fog lights on a 2004 jeep cherokee uk model . The front fog lights work. Should the rear fogs come on when you switch on the front fogs or is there a seperate switch...


Try and see what happens when you put it in REVERSE? There are many American Vehicles that the light only works when you are in Reverse to see what is behind you

Apr 08, 2013 | Cars & Trucks

1 Answer

Saxo rear fog light working and front fog lights not working


try changing the relay for the front fogs,the front and rear are not connected in any way,check the fuse box lid for relay location ok

Jan 29, 2012 | Citroen Saxo Cars & Trucks

1 Answer

HOW DO YOU CHANGE THE BULBS OF THE FOG LIGHTS?


The fog lights on most vehicles sit directly underneath the headlight bulbs. The ballast and wiring work just like the headlights, so changing them takes not much time. The procedure to change the fog light is as follows:-- 1) Open the hood and reach down underneath the headlights to unplug the electrical plug from the fog light assembly. Squeeze the top of the release tab and pull the connection off the bulb's ballast. 2)Turn the fog light counterclockwise to remove it from the fog light housing. 3)Install the new fog light bulb.Then connect electrical plugs properly. 4) Test the fog lights by turning it ON. Thanks. you can rate this solution and show your appreciation.

May 20, 2010 | 2002 GMC Yukon XL

1 Answer

How do u change a bulb in the fog lights on a


The fog lights on most vehicles sit directly underneath the headlight bulbs. The ballast and wiring work just like the headlights, so changing them takes not much time. The procedure to change the fog light is as follows:-- 1) Open the hood and reach down underneath the headlights to unplug the electrical plug from the fog light assembly. Squeeze the top of the release tab and pull the connection off the bulb's ballast. 2)Turn the fog light counterclockwise to remove it from the fog light housing. 3)Install the new fog light bulb.Then connect electrical plugs properly. 4) Test the fog lights by turning it ON. Thanks. you can rate this solution and show your appreciation.

May 20, 2010 | 2003 Ford Focus

1 Answer

Fog lights


hi from uk the fog lghts? i assume front fog lamps ? the head lights have to be on dipped beam then the fogs will also work but in uk this is so as to prevent fogs only being used (blinding oncoming traffic ) if weather conditions req fogs to be used for poor visibility ? then the side/tail and h/lights must also be on like wise the rear fog light/s operate the same way hope this helps and makes perfect sense ?? all above is assuming bulbs have been checked and fuse/relay and power to each lamp ?

Jan 11, 2009 | 1998 Ford Escort

1 Answer

New Fog Lights Won't Work


check fuse 19 in the fuse blocks under the hood...there is also a relay for the fog lights

Dec 24, 2008 | 2006 Jeep Wrangler

1 Answer

Lights


FROM: Lusty Kid:

Your fog lights should not work with high beam... they should work with the low beams. they are connected wrong, which probably drew too much current through the light switch burning out the contact points for the parking lights in the switch

Start by Fixing the fog light connections to work with low beams. Appears to me this was not factory installed. Aftermarket kit maybe! Then see if your parking lights work. If parking lights don't work still and everything else works, replace the light switch $50 at the dealer. The switch works the fog lamps when you pull out the knob to turn on the fog lamps when the lights are turned on. When the fogs are on you will see a little amber light to let you know your fogs are on. When you switch to high beam the fog lamps go off. Again if its not working that way, then is wired wrong. Needless to say, there should be connectors in the harness of the lights for the fog lamps. Use those if possible with the kit that you can get at the dealer, or you can splice the connector with those blue splicing clips sold at the auto part store. Make sure ground is ground when splicing and water proof the connection sith silicone and tape.

Dec 13, 2008 | 2004 Ford F150

Not finding what you are looking for?
1998 Chrysler Sebring Logo

407 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...