I was recently in a wreck with front bumper damage on my 06 Honda Odyssey Touring Van. The repair estimate just shows a bumper cover so is this easy to replace if I wanted to do it myself?

if that what it says then yes but read the fine print as some so called bumper to bumper warranties only cover engine and drive train

Secure Download HONDA ODYSSEY SERVICE REPAIR MANUAL 1999 2000 2001 2002...

for the easy solution download the pdf file

if you go to a body shop they may have a way to refasten the bumper cover without replacing it they do get creative when fixing things.if not then the bumper cover will have to be replaced,check out a wrecking yard you might have luck finding one not damaged due to an accident and may even be the proper colour.

you need a haynes repair manual look in the body chapter.reason you need a repair manual because you need to see how remove front portion of fender well liner to under the front bumper fascia to remove fog lights.manual will keep you from damaging your car.

Sounds like you may need to change the washer fluid pump. They do go bad. It's located inside the washer fluid reservoir, which is in the front of the passenger's side wheel well, behind the front bumper.

Secure Download HONDA ODYSSEY SERVICE REPAIR MANUAL 1999 2000 2001 2002...

for the easy solution download the pdf file

Yikes! The transmission has gotten a lot of complaints, but $3500 sounds high. You should be able to find a used one for about $1200, Power steering is no big deal, unless you were in a wreck, and the front end alignment is $75. So somebody is wanting your wallet and your kids and your dog. I would get a second opinion on all that. The van isn't that old. And 140,000 miles, it is just getting broke in. I have 250,000 miles on my rodeo, and the tranny just quit. I got a whole truck for parts with tranny for $400. Took out the tranny, and a bunch of parts, and sold a bunch of parts, and then sold the truck for $400! Not bad. Hope this helps.

Approx £300 from honda, but you can get a cheaper part that looks just the same for about £190 if you can find a salvage yard you might get a genuine honda one the same colour as your car for about £100

Alignment: Specifications
Alignment
Wheel Alignment
Tire size:
VAN, LX, EX, EX-L models: P235/65R16 103T
EX-L Touring model: P235-710R460A 104T
Tire pressure:
Front (VAN, LX, EX, EX-L Touring models) ........................................................................................................... 230 kPa (2.3 kgf/cm2, 33 psi)
Front (EX-L model) .................................................................................................................................................. 240 kPa (2.4 kgf/cm2, 35 psi)
Rear ........................................................................................................................................................................... 240 kPa (2.4 kgf/cm2, 35 psi)
Caster angle ................................................................................................................................................................................................... 2° 32' ± 1°
Camber angle:
Front ........................................................................................................................................................................................................ 0° 00' ± 30'
(Maximum difference between the front right and left side: 0° 30')
Rear ............................................................................................................................................................................................................. -0° 30' ± 45'
The camber angle can be adjusted up to ±25' (center of tolerance) by replacing one damper pinch bolt with the adjusting bolt. The camber angle can
be adjusted up to 50' by replacing both damper pinch bolts with the adjusting bolts.
Front toe-in ............................................................................................................................................................................. 0 ± 2 mm (0 ± 1/16 inch)
Rear toe-in ......................................................................................................................................................................... 2 ± 2 mm (1/16 ± 1/16 inch)
Turning angle

Inward wheel 41° 56' ±2°
Outward wheel 34° 32' (Reference)

Toe - 0° +/- 2mm