front brakes dont seem to be working properley. new pads fitted.vacum pump pulling min 14 ins on tickover,20 ins at 1500 revs.vacum hoses replaced,but rear wheels lock and the front end doesnt seem to be supplying much braking
When was the last time the brake fluid was flushed? Spongy/unresponsive brakes can sometimes be due to moisture/air in the brake lines. You can take the wheel off and get someone to push the brake peddle and see if the brake caliper is moving at all. If it is moving, but not enough to stop the wheel, I'd recommend flushing the brake fluid. If the caliper is not moving at all, it could be the caliper itself (but its very unlikely that both would go bad at the same time)
engine missfire and smell real bad like gas is there a fuel regulator or can you test the fuel...
(More)
engine missfire and smell real bad like gas is there a fuel regulator or can you test the fuel regulator