You need to put a code reader on the car to retreive the codes .The trouble code that caused or is causeing the problem will show up and lead you where to look and if the code is not active then the reader will be able to turn out the light.[Check your gas cap to see if it's tight].
clutch loses fluid and does not want to go in gear. could this be the clutch slave cylinder...
(More)
clutch loses fluid and does not want to go in gear. could this be the clutch slave cylinder malfunctioning?
I have a 1999 chevy cavalier and the gear shift is not getting into gear. When I try to start the...
(More)
I have a 1999 chevy cavalier and the gear shift is not getting into gear. When I try to start the car nothing happens. Is this the transmission linkage and if so how easy is it to repair at home?
My car was having problmes starting, it would try but then no luck. The starter was taken off and...
(More)
My car was having problmes starting, it would try but then no luck. The starter was taken off and looked at and i was told it was fine and i was told it was the solenoid, i tried changing the solenoid but its still not working. You can hear that electricity is getting to the solenoid but the car is still not starting. What went wrong?
when i started my car and put it in drive, i stepped on the gas pedal and it jerked really hard as i...
(More)
when i started my car and put it in drive, i stepped on the gas pedal and it jerked really hard as i proceeded to drive as i went up hill it started to lose power then jerked again for about 5 seconds then went on uphill as if nothing ever happened. on another day i started the car and put it in drive,it wouldn't move, so i put it in reverse, it still wouldnt' move. fyi i havent had atransmission tune up in 4 yrs. what do ya think.
Add the things you own to your My Products collection and get product information, solutions to problems, manuals & guides, tips and how-to's, reviews & ratings and local repair service - all in one easy place.