Expert
(602) 909-6450
Answer
How do I replace the rear wiper
Problem for Chevrolet 2006 HHR
Please tell me how to replace a burned out head light, high beam.
Same Problem
Nov 12, 2009
- Thank you. I got the answer for the high beam light. Once again, thankyou.- gb5506Best Solution
posted on Nov 11, 2009
To replace the headlamp, turn signal, or parking lamp bulb:This information should be in your owner's manual.
Turn the wheel to access the wheel well.
Turn the wheel to access the wheel well.
- Remove the fasteners located on the wheel liner. To access the headlamp and the turn signal/parking lamp bulbs.
- Reach in behind the wheel well liner and locate the bulb to be changed.
- Turn the bulb socket counterclockwise and pull it straight out of the lamp assembly.
- Pull the old bulb straight out of the bulb socket.
- Push the new bulb straight into the bulb socket until it clicks.
- Push the bulb socket straight into the lamp assembly and turn it clockwise to lock it into place.
- Reinstall the wheel well liner using fasteners.
Yes
No
Asker's Testimonial
"
Thank you. Very helpful. I didn't have an owner's manual when I bought the car.
" - gb5506
Popular Solutions for 2006 Chevrolet HHR
Questions and Unsolved Problems for 2006 Chevrolet HHR
Do you recommend Chevrolet 2006 HHR?
Answer
Answer
How do I replace the stocks and struts on my 06 Chevy HHR?
Answer
my headlight bulb is out how do i change it
Answer
How to change a front turn signal bulb in a 2006 HHR
Answer
how to remove the heater core from 2006 hhr chevy
Ask our Experts
Featured Parts
Parts for your 2006 Chevrolet HHR
Powered by
Top Cars Experts
Top Car Repair
Best Chevrolets
Recommended by Owners
Recommended by Owners
