You would have to get the the panels out and underneath to get to the bulbs to have them replaced. Check as well the wiring in case the replacement still does not solve it.
2000 maxima with no overdrive and code po744 .no tranny slipage in1-2 shift or 2-3 shift,very...
(More)
2000 maxima with no overdrive and code po744 .no tranny slipage in1-2 shift or 2-3 shift,very smooth.the od light works and comes on and off when the od button is pushed.
I have a 2000 nissan maxima, with traction control. Long story short. It blew its transmission and I...
(More)
I have a 2000 nissan maxima, with traction control. Long story short. It blew its transmission and I had the transmission replaced. It started fine at first.. Then it had some trouble starting, then it wouldn't start at all. It just clicked, so I had the starter replaced. After the starter replacement, it would crank, but not start. MOST OF THE TIME. One out of 15 times, it would start and run fine. Next step, I took it to another mechanic, they couldn't figure it out and sent me to the dealer to get a diagnostic. I got the diagnostic and the dealer reported a problem with ECM and the IAC (air intake control). I went and bought a new ECM and IAC and returned it to the mechanic with the instructions. They put in the ECM and it still wouldn't start. Then they replaced the cam angle sensor and the crank angle sensor. Still no dice. The mechanic is mystified and cant figure out what is going on because according to their diagnostic tool, everything is fine. He has not put in the new AIC yet (actually, it's the whole throttle body assembly).. I'm not sure if I want to pay him to try, if that wont solve the problem. I'm down almost 4 grand on this car now.. It would **** to lose that. Any ideas? Should I cut my loses and give up?