Thankfully it wouldn't damage anything. However it is a messy job to drain the fluid back out. Either a shop can do it for you, or you can simply remove the return line and place it into a bucket. Turn it by hand to get most of the fluids out. Replace with cheap Type F, since you'll probably have to do it a few times to completely replace the fluid. Make sure its all red (Type F) or clear (Powersteering fluid). Good Luck
I am down to putting steering wheel and instruments in a 67 mustang after a 10 year long project. I...
(More)
I am down to putting steering wheel and instruments in a 67 mustang after a 10 year long project. I have parts, I think, but can't figure out how the steering wheel, horn ring and all the misc parts go together. The steering wheel itself is somewhat cracked and the screw holes are not exactly where they should be.
does the shifter linkage on the side of a c6 gearbox come off if so how do you get it off so i can...
(More)
does the shifter linkage on the side of a c6 gearbox come off if so how do you get it off so i can use the b and m adapter so i can install the new shifter. many thanks.
i purchased new front & rear seat upholestry sets & front seat buns but im not sure...
(More)
i purchased new front & rear seat upholestry sets & front seat buns but im not sure how to install them. signed gary.