The pump is not supposed to stay on, you should only hear it for a second or two when the ignition is turned on. At least you know the pump is working. There must be a problem in the ignition system, like no spark, do to a bad coil, ignition module, without testing it's hard to say.
Starter motor seems to short through solenoid windings, I could do with knowing what the aproximate...
(More)
Starter motor seems to short through solenoid windings, I could do with knowing what the aproximate resistance is of the starter solenoid, At the moment it measures 1.5 ohms between spade connector for starting and solenoid earth?
when cold and in drive truck only tries to lunge forward,but if you pull it into low it will go...
(More)
WHEN COLD AND IN DRIVE TRUCK ONLY TRIES TO LUNGE FORWARD,BUT IF YOU PULL IT INTO LOW IT WILL GO FINE,AND WILL MANUALLY SHIFT.I CHANGED FLUID&FILTER.IT WAS REBUILT BY AMMCO APPROX.15,000MILES AGO,BUT SITS LONG PERIODS BETWEEN USE.
linkage diagram 1976 w200 it was apart when i got the truck i replaced the gromets now cant find the...
(More)
linkage diagram 1976 w200 it was apart when i got the truck i replaced the gromets now cant find the correct way it goes back