2001 jeep gd. cherokee larado 4.0 4wd auto. starts and stalls as if key imobilizer shutting down engine every 2 seconds scanned jtec message not received also voltmeter & fuel gauge not operating properly ohmed wires at inst. cluster, aldl, ck'd. diag. connector near base of steering column every thing comes up that it should run. replacing skims mod. can i install the 4 digit security code without a scanner and if so what would be the procedure.thankyou! nitetrain2
Have replaced radiator. Have bled cooling system. however, no heat from heater. hoses to heater are...
(More)
Have replaced radiator. Have bled cooling system. however, no heat from heater. hoses to heater are hot.
key will not turn in the ignition key cylinder I put the key into the ignition and the cylinder will...
(More)
key will not turn in the ignition key cylinder I put the key into the ignition and the cylinder will not turn out of lock. How much would it cost to change out the key cylinder and is it time consuming to do?