Battery dead, or starter problem? My 1992 381i won't start. The battery has at least some juice in it (I can turn the headlights and interior lights on). But the digital clock has re-set to 0:00, suggesting there could be a battery problem.
When I try to start, it won't turn over. After turning the key to "start" once or twice, I receive a rapid clicking sound. I tried to jump the car, but that had no effect.
Don't know whether this is a starter problem, or a battery problem. Any thoughts?
It is most likely a flat or dead battery but first check the battery terminals are clean and firmly attached.
If all above checks ok replace the battery.
There are several reasons why an attempted jump start may not have worked, such as :-
1) the jump cables used are poor quality,
or
2) the battery used as a power source may not have sufficient capacity.
I'd also check the age of the battery, if it is not more than five years, check the battery cells to determine if the battery is still good, and charge with a battery charger
Was driving today and the trans progeam light came on. Its been idleing a little high for a few...
(More)
Was driving today and the trans progeam light came on. Its been idleing a little high for a few days. Stopped and restarted and it did it again. Got home. Started to go out again and nothing. Jumped it and nothing. Lights work but engine won't turn over.
fuel gauge shows empty all the time, flickers when the key is turned but never shows any fuel even...
(More)
fuel gauge shows empty all the time, flickers when the key is turned but never shows any fuel even with a full tank, i checked out the fuel level sending units in the tank, both are ok, and the issue with the odometer/speedometer is that it never works at all not even a flicker.. are these common problems with the bmw's and is what is causing these issues?? any related info would be helpful.. thanks in advance
My BMW 318i has been going into "fail safe"mode, so I have to change gears manually. I had...
(More)
My BMW 318i has been going into "fail safe"mode, so I have to change gears manually. I had a new solenoid put in- still same problem. They sent it to an auto electrician who said "condensation in the computer." More repair bills....Still having the same problem!! Help