that transmission is computer controlled the computer reads info from sensers on the engine with those sensers gone there are nothing to read so the computer does not know what to tell the tranny to do you may be find and computer setup from jegs or summit that will allow you to run that tranny with a carbed engine good luck.
HI, I have a 1991 2500 4X4 with a no start condition. The vehicle has ignition spark to the dist and...
(More)
HI, I have a 1991 2500 4X4 with a no start condition. The vehicle has ignition spark to the dist and plugs. However no injector pulse on the ground side of the circuit from the ecm. The voltage to the injectors are present. Any ideas?
Hello,i am trying to figure out why the front axles or differential makes a loud clunk every 1/2...
(More)
Hello,i am trying to figure out why the front axles or differential makes a loud clunk every 1/2 mile or so.The 4x4 did not get used for along time,i replaced the 4x4 acuator that engages the axles and since then it has been making the loud clunk.I have made sure it is in 2 high,i have tryed reversing several yards.I have removed the acuator temporarily to see if that helped but nothing changes,this is a loud clunk like it is trying to engage.Any help would be great.Thank you!
I have a 1991 GMC surburban,it wont start, too much fuel (floods). changed the coolant temp sensor,...
(More)
I have a 1991 GMC surburban,it wont start, too much fuel (floods). changed the coolant temp sensor, put on a different throttle body(with different sensors), and also changed to a different ECM, still way too much fuel..What should I do next