having trouble removing u- joints from drive shaft there are no snap rings it appears to have set pins or some thing holding them in is there a special trick to removing them ?
There glued in you need to heat em up to remove em, or stick em in a vise and beat the h*** out of em. Its easier to heat em up but don't get crazy it don't take much
my gauge cluster doesnt light up! I took it out today and the bulbs on the back of cluster are not...
(More)
my gauge cluster doesnt light up! I took it out today and the bulbs on the back of cluster are not burned out , my fuse is good! My brotha said it could most likely be the dimmer switch because none of my nobs for the a/c or heat light up either? ANY body that can help id appreciate it!
97 s-10 V6 automatic When I put the vehicle in drive the light indicator for D sometimes comes on...
(More)
97 s-10 V6 automatic When I put the vehicle in drive the light indicator for D sometimes comes on sometimes goes out. When the light does go out the vehicle RPMs go up to 3000 when driving 60 mph. It's like it won't switch to fifth gear. It also has a fluttering speedometer needle when the vehicle is in drive, but when it is in neutral the needle does not flutter.