With with key on and engine NOT running my oil pressure guage reads HIGH oil Pressure. This is true even after changing the oil and filter. I want to change the oil sending unit but having trouble locating it. I know it is on the side where the oil filter is but not exact location. Everything else is normal and engine runs good. Does not use any oil and no other issues with 149,000 miles on it.
just about run in ,mobile tanks on wheels these motors ,but iam not sure where it is ,i change one a while back because it was leaking ,know it was on the side where the oil filter and it was level with the oil filter because the oil gallery is level with the oil filter
Was this helpful?
Yes
No
1 person thought this was helpful
Asker's Testimonial
"
Thanks for very quick respose. Your a big help
" - mltemes
2002 Jeep Grand Cherokee 4.0L 6 cyl camshaft position sensor. Need installation and alignment...
(More)
2002 Jeep Grand Cherokee 4.0L 6 cyl camshaft position sensor. Need installation and alignment procedure for reinstalling oil pump driven cam shaft sensor after it has been removed and turned outside of engine. Engine has been turned over briefly with sensor in wrong alignment.
My overhead driver information panel will not come on when I start my car. It only started doing...
(More)
My overhead driver information panel will not come on when I start my car. It only started doing this as the outside weather turned colder. If I restart my car after it has been heated up for a while, the panel will come on. Is there a fix to this?
Add the things you own to your My Products collection and get product information, solutions to problems, manuals & guides, tips and how-to's, reviews & ratings and local repair service - all in one easy place.